AutoCAD Inventor :: Calculate Volume In Elbow For Liquid
Nov 4, 2013Is it possible to calculate the volume in this elbow for liquid?
View 1 Replies
ADVERTISEMENT
AutoCad :: How To Calculate The Volume
Jan 9, 2013calculate the volume.I attached here my dwg file. I never done this before and I want to know the correct answer when I want my land to be levelled at 6m.How much volume to fill and the land to be removed.
View 9 Replies View RelatedAutoCad 3D :: Calculate Volume In 2012?
Apr 24, 2012There are points in different levels i wanna make the surfer with this points and project the surfer on the down surfer(that makes with other points) after that make an enclosed Volume and finally Calculate the Volume between this 2 surfer. How its possible to Calculate?
View 8 Replies View RelatedAutoCAD 2010 :: How To Calculate The Volume
Oct 20, 2012I am trying to calculate muck away for work, and I have drawn the site plan in millimetres for accuracy. However when I try to calculate the volume I get this value: 3.6293E+12. I am guessing that it is saying this due to the fact its in millimetres, and I am trying to calculate a large area and convert in into metres squared. What this value means?
View 1 Replies View RelatedAutoCAD Civil 3D :: Calculate Volume Of Design Plan
Feb 14, 2013I have a problem when calculating the volume of a design plan, the slope of the land, the design had to be made so as not to slide trap. How it makes grading a trap,
View 2 Replies View RelatedAutoCad :: Calculate Volume From Site Plan Drawing
Jun 10, 2013I'm trying to work out a way to calculate the fill volume difference for a proposed landscaping plan (images attached) and how to model and calculate the amount of fill required to do the job.
Site-Plans-4-Recovered.jpgSite-Plans-4-Recovered2.jpg
AutoCAD Civil 3D :: How To Calculate In A Table The Volume Of Cut And Fill Between The Stations
Sep 18, 2012How to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.
View 3 Replies View RelatedAutoCad :: Changing Object Material - Calculate Volume And Mass
Jun 3, 2012With command massprop I can get many interesting data about 3d object, but where can I set material that my object is made of. Lets say I need to calculate volume and mass of my object which is made of aluminium, what are my options?
View 3 Replies View RelatedAutoCAD 2013 :: Convert Irregular 3d Shape To Solid To Calculate Volume
Feb 21, 2013I have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?
AutoCAD Civil 3D :: Surface With Specific Slope - Calculate Cut And Fill Volume
May 25, 2013I use Civil 3D 2011 and I am new to it. I have created a natural ground surface from survey points. Now i want to create a finished surface with a specific slope in a specific direction at a specific elevation and then to calculate cut and fill volume.
I can create a flat surface at a specific elevation. How to tilt this surface to a specific slope along a specific direction.
AutoCAD Civil 3D :: Calculate Volume With Both Sides Of Uneven Rock Surface In Excavation Pit
Nov 11, 2013At my job site, they is about 20meter height of uneven rock surface in the excavation pit.
To calculate the volume ,I need to include this uneven rock surface wall.
For doing so,The sharp edge will displays in the cross section.
Because the uneven surface, I cannot create the surface with normal step.The TIn line will joins horizontally,not in vertical direction as is intended.
AutoCAD Civil3D 2014
Inter(R)Core(TM) i7-3770 cpu@3.40GHZ
RAM 8.00GB
64-Bit window7
QuadroK6000
Revit :: How To Calculate Volume Of Excavation
Oct 24, 2011Having a surface, and then applying a building pad, how can i discover the volume of excavation?
View 1 Replies View RelatedRevit :: Calculate Column Quantity / Gross Volume
Apr 12, 2012How to calculate Column quantity and gross volume.
View 8 Replies View RelatedRevit :: How To Calculate Volume Of Concrete To Pour A Cast In Place Spiral Stair
Dec 3, 2013if this is easy, but how do I calculate the volume of concrete needed to pour a cast-in-place spiral stair?
View 1 Replies View RelatedAutoCAD Inventor :: How To Make Mitered Elbow From Cylinder
May 31, 2012How to make a Mitered Elbow from a cylinder this is driven by our Manufacture they would like to roll a sheet of metal and have a stitch cut within the rolled sheet so they can then just cut the additional amount of material between the stitches to get two identical mitered elbows from one piece of rolled sheet metal. Please see the attached doc. to see what I'm trying to do.
Inventor Professional 2011
Vault Professional 2011
Windows 7 64-bit
Intel(R) Xeon(R) W3530 @ 2.80GHz processor
NVIDIA Quadro FX 3800 graphics card, 15G RAM
AutoCAD Inventor :: Custom Elbow That Has Angle Of 89° In The Tube
Sep 10, 2013I have a custom elbow that has an angle of 89° in the tube and pipe author dialog but I cannot select it in the tube and pipe style in the "elbow custom" field where the filter properties are 45° to 90°. I can select it as the standard elbow though where the filter properties are 90° to 90°. This doesn't make any sense. All the other filter properties (grayed out) are the same.
.
IV2013
AutoCAD Inventor :: Unable To Unfold Sheet Metal Elbow
Oct 6, 2011I'm looking to unfold the attached sheet metal elbow and am unable to do so. After modeling the part I was also unable to rip an opening to split the part. I opted to cut an opening with a profile, but I am still unable to unfold the part. The probelm is likely obvious and I believe it is because I used part splits to create the different sections.
View 2 Replies View RelatedAutoCAD Inventor :: Add In A GOST Elbow 90deg A Few New Lines With Dimensions
Jan 20, 2012Is there any opportunity to make changes in standard library in Autodesk Inventor 2010? For example I want to add in a GOST Elbow 90deg a few new lines with dimensions. The smallest Elbow is with DN40, and I need DN20 DN 25 DN 32.
Or Is there Just Two ways - to make my own Elbows, or copying standard Lab and then making changes?
AutoCAD Inventor :: Generating An Elbow On Metal Part Drawing?
Oct 17, 2012how to create the elbow part of a metal type ( actually a J-shape Bolt Threaded material) .
I had finished the straight part by simply revolving my required profile. then i was to draw the elbow part but "sweep" doesnt work out
AutoCAD Inventor :: Draw Sheet-metal Elbow With (t) Junction
Sep 5, 2013How to draw this junction on the Shet metal Elbow that i have create, i am sending what i have made so far and the 2d of what i need. My version of the Inventor is 2013.
View 4 Replies View RelatedAutoCAD Inventor :: How To Flatten Elbow Like Sheet Metal Development
Oct 30, 2012I have an elbow with a slit on the other side and would like to use Flatten feature in sheet metal. How do I do it? I tried but an error pops-up, what does it mean.
I have attach the file.
AutoCAD Inventor :: Flat Pattern Of 45 Degree Standard Elbow
Jun 19, 2013I am using 2013 inventor. I tried to make flat pattern from the standard 45 deg elbows have thk 0.237" and 4" dia.
But I am not able to do it. I need to give this pattern to my welder to cut 45 deg elbows from 90 deg elbows.
Please find attached part.
AutoCAD Inventor :: How To Draw Segment Elbow 90 Degrees And Create Flat Pattern
Jan 16, 2013I would like to know how to draw segment elbow 90 degrees ( segments are not equal ) and create Flat Pattern for each of the segments - using sheetmetal in Autodesk Inventor?
View 9 Replies View RelatedAutoCAD Civil 3D :: Generate Volume Report For Bounded Volume Surface?
Oct 2, 2012Is there a way to generate a volume report for a bounded volume surface?
View 3 Replies View RelatedAutoCAD Civil 3D :: Sample Line Volume Report And Surface Volume Give Different Quantities
Jun 18, 2012I'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.
My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.
The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.
What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.
AutoCAD Civil 3D :: Cross Section Volume Vs Volume Surface
May 31, 2013I've read a few threads on this way back but cannot locate them. I have two surfaces and create a volume surface and it reported the volume as 493 cy. I then ran some sample lines at 25 foot interval and the total volume is reported as 964 cy.
View 1 Replies View RelatedAutoCAD Civil 3D :: SSA Storage Volume Is Double Of Pondpack Volume
Apr 24, 2013I want to use it as my primary hydrologic and hydraulic modeler. It only makes sense. Well, I got the program to work and had things linked in and was able to route a storm through the network. But when I routed the storms, I had to model double the storage that i expected.
So I went back to the program I'm familiar with - Pondpack by Benltey - and designed the same system I routed in SSA in that program - and got the storage volume that I would expect for a site of this size - about 2 acres.
Is there possibly a setting that I'm missing that makes my outlet structures route slower or less than they should? Or is there some other reason that a system would give this kind of inflated need for storage?
AutoCAD Civil 3D :: Volume Boundary Creates Incorrect Volume
Feb 25, 2013I have an issue with using Bounded Volume or Adding a Boundary to Volume Surface things so bad... = incorrect volumes.. sometimes extremely incorrect.. I understand that the surface rectangle when a boundary is added but this could be horrible if not checked.
View 3 Replies View RelatedAutoCAD Inventor :: Calculate Paint Area?
Jun 8, 2012How do you calculate paint area?
We do a lot of chutes (for mining). They need to be painted on the outside only. They also need to be lined with rubber sheet on the inside. The area given in the physical tab in iProperties is the total area.
The area of the edges of the plates are small enough that we can ignore them, but is there a way to calculate half the model's area and get that result in the drawing in a text note?
We've only recently switched over to Inventor (used to be on Solidworks, where we had the same problem).
AutoCAD Inventor :: Calculate Area For Surface?
Nov 13, 2013I have a cast aluminum part I need to calculate the surface area for our plating process. I have done a simple area, its not right (.015ft^2). I have derived it as a surface but can't get a volume calculation.
View 9 Replies View RelatedAutoCAD Inventor :: Automatically Calculate The Length?
Dec 20, 2011We design with a lot of tubing and pipe. Is there a way to add a custom property to the BOM that will automatically show the extruded length of, say, a length of pipe or tube? Also, is there a way to automatically calculate the total length of all tubing of a given size?
AutoCAD 2013
Inventor 2013
Windows Pro 7 x64
Asus Sabertooth X58
Intel Core i7 960 @ 3.2 GHz
24 GB ram