AutoCad :: Maps - Hatch Area With Irregular Shape / Geometry Information?

May 6, 2011

I work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.

View 9 Replies


ADVERTISEMENT

AutoCAD Map 3D :: Searching Address Information In Maps?

Nov 17, 2011

We're looking to use our state provided aerial photos as background landbase in our production maps. I'm wondering AutoCAD Map has to ability to search for geographical locations (like a Google Maps) if the database (??) is connected to the drawing. I understand our state's aerial photos to be referenced to the NAD83 state plan coordinate system.

View 1 Replies View Related

3ds Max :: How To Delete Section Of Irregular Geometry

Jul 12, 2013

I've attached 2 images showing of the section of the geometry I want to delete, second image is as a editable poly displayed as a wireframe.Is there a simple way of idenfying the section boundary and deleting all the enclosing polygons?

View 1 Replies View Related

AutoCad 2D :: How To Get Geometry Information In Properties

Apr 26, 2011

once I've set an origin, how do you get the geometry info in the properties to show the coordinates from that origin? what I want to do is set an origin and then find relative points from that origin. What are the ways to do this? On ProgeCad I would just set an origin and then if I viewed the properties of say a circle, it would tell me the x,y,z coordinates from that origin but I can't seem to do it in AutoCad.

As you can see from the picture, what I did was set an origin at the on point. Then I selected the arc for which I want to know the coordinates. But as you can see in the properties it says the x,y are like 566,567mm, but clearly if I draw lines to that point and measure the lines it is only like 1.00,0.70mm.

View 9 Replies View Related

AutoCAD VB :: Get Coordinates Of Irregular 3D Solid Shape?

Oct 30, 2008

I have an irregular 3D solid, a slab with an opening, and I want its coordinates. However, Autocad provides coordinates only for a simple 3D face.

I plan to use 'Xedges' to get its all edges first, and then get coordinates of these lines.

View 2 Replies View Related

AutoCad 3D :: Create Solid From Irregular Shape

Jun 4, 2011

I have a mesh box here, and I need this mesh box had shape like the form I drew with polylines. there is a picture of it. I tryed mesh modeling,but no luck, because I need exactly the shape (of mesh box), that is drawn with polyline

View 1 Replies View Related

AutoCAD Inventor :: How To Create Irregular Shape

Dec 11, 2011

How can I create the irregular shape?

View 3 Replies View Related

AutoCad 3D :: Draw Silicone With Irregular Geometric Shape

Jun 15, 2012

I should design a Silicone model for a Breast Cancer Survivor. My problem is the Irregular Geometric Shape of silicone. I tried "Sphere"/ "Loft" commands,but I didn't get my desired outcome! I also drew the 2D base by "Spline"; however,"Extrusion" was not a good option to make it look like a 3D silicone!

View 9 Replies View Related

AutoCAD Architecture :: How To Divide Irregular Shape Into Equal Parts

Sep 13, 2013

I need to divide irregular shapes into equal parts. For example, the attached shape needs to be divided into 10 equal parts. Parametres could be set such as all dividing lines are horizontal.

I need to do this in autocad (2013) if possible.

The closest discussion I found on this was at [URL] ......

View 1 Replies View Related

AutoCad 3D :: 3D Meshed Surface From Extruded Spline Irregular Shape

May 17, 2013

I am trying to create a 3D meshed surface from an irregular shaped solid I created using firstly a SPLINE, FILLET, PEDIT, and EXTRUDE. I have a solid in the basic shape now, but I am trying to create a meshed top and bottom (x, y, z,) to change the contours of those surfaces. I have looked at 3DMesh but it asks for (n,M,) coordinates like it is a regular shaped surface (square, rectangle) where one can calculate the required even spacing needed.

My goal is to create in CAD something like a fine art carved piece of wood, with irregular shaping and no straight planes or surfaces.

I have included a basic picture in JPEG format for your review. This is the item from which I am trying in ACAD 2010 to construct into a usable adjustable form so I may parametric for my needs.

View 9 Replies View Related

AutoCAD Civil 3D :: Make Big Size Pipe With Irregular Section Shape?

Dec 9, 2013

How could make big size pipe with irregular section shape by using Civil 3D?

View 5 Replies View Related

AutoCAD 2013 :: Convert Irregular 3d Shape To Solid To Calculate Volume

Feb 21, 2013

I have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.

how I could calculate the volume of this pit?

View 9 Replies View Related

AutoCAD Civil 3D :: Make Big Size Pipe With Irregular Section Shape?

Dec 9, 2013

How could make big size pipe with irregular section shape by using Civil 3D?

View 3 Replies View Related

Photoshop :: How Can I Darken A Specific Irregular Area, Without Afecting The Rest Of The Picture

Aug 23, 2008

Like the title says I'd like to know how to darken (or change the color) a specific irregular area of a picture, without afecting the rest of the picture.

I want to darken the color of the thin "vertical!?" lines of this picture, without afecting the remaining picture:

View 2 Replies View Related

Photoshop :: 1 Or 2 Pixel Border On Irregular Shape In PS6?

May 6, 2004

I have an irregular shape (silhouette of a horse) in a darker color that I need to have cleanly bordered with 1 or 2 pixels (white).

Any hints? -I tried duplicating / desaturate / brighten / transforming the layer and ended up with (predictably) bad results.

View 5 Replies View Related

Xara :: Manually Tracing Around An Irregular Shape

Jul 12, 2011

I have trouble manually tracing around an irregular shape, such as a pitcher winding up to pitch a ball. I use the shape editor to outline the figure. When I finish I find that there's two outlines, and they're not connected. Is there some way to get them connected as one complete outline?

View 5 Replies View Related

Illustrator :: Gradient Along Irregular Shape And Contour?

Sep 23, 2010

i already know that in order to get a gradient to follow the outline of an irregular shape you could do a "blend" with smooth colour'

T he problem I'm having is that it's an involved process and most of the time requires too much tweaking - the points in both shapes should be the same and should approximate each other's distances btw the location on both shapes. I'm wondering if there's another, more direct way to, let's say, take a letter and get a falloff gradient in the shape of the letter...
 
just realised that a drop shadow might work....i need the gradient to eventually become a mask...

View 4 Replies View Related

Xara :: How To Mould Text To Irregular Shape / Space

Apr 26, 2011

im using XXP5, i have an irregular polygon or shape which is the space between a curved shapes outline. within this irregular shape, I want to mould the textso it is stretched / destretched to fill the space yet still be readable.

i have tried to convert the text to shapes and then adjust the nodes, but i dont get any nodes making up each letter(!) the mould tool itself doesnt seem to work. the process first involves stretching the font and rotating it to roughly fit it as close as possible.

View 3 Replies View Related

AutoCad :: Get Area Under Geometry In Properties To Give Sqft?

Dec 20, 2011

how to get the area under geometry in properties to give me sqft? It used to give me sqin and sqft and now (in one particular drawing) it will only show up as a sqin number. It doesn't seem to matter what I measure in this drawing...including new geometry that I add to it. (I tried drawing a rectangle in this drawing to see if my new geometry would give me a sqft number)

View 2 Replies View Related

AutoCAD Civil 3D :: Object Information To Object Geometry

Mar 12, 2012

I'm making a surface out of contours. The problem is the contours have the elevation listed under object information, not geometry (the contours were brought in from a GIS file, which I do not have access to, or I would bring them in again with the elevations properly assigned, this is not an option). How can I quickly change the geometry elevation property to match the miscellaneous property?

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 4 Replies View Related

AutoCad 2D :: How To Get Area From Hatch

Nov 30, 2013

I have many Hatch pattern in my dwg. is there any LISP if i slect any Hatch then it will give me area in table

View 5 Replies View Related

AutoCad 2D :: Hatch Has No AREA?

Jul 13, 2011

How can it be that a hatch object has no area property? Using the AREA command, it says the object has no area.

None shown in properties.
None listed using vlisp (vla-get-Area Obj).

I have seen this before, but why or how it happens.

View 7 Replies View Related

AutoCAD Civil 3D :: No Area On Hatch

Feb 29, 2012

I have a hatched region that clearly has an area, however the geometry properties indicate that there is no area associated. This a a complex region with many PI's.  I really don't want to recreate this area.

Is there any way I can create a boundary around the hatch lines?

View 5 Replies View Related

AutoCad 2D :: Hatch Area Inside A Box

Jan 20, 2012

im trying to hatch a area inside a box but every time i try it says that there are gaps but they are within tolerance and give me OK or NO

if i select OK it hatches one i want and one beside it and the boundary it creates is all messed up
if i select NO nothing happens

ive tried to find out how to identify the gaps and ill ive found is to look for the red circles.. mine dont seem to display is there anyway to turn them on? or another way to show the gaps i have so i can close them i always draw with snap on

View 5 Replies View Related

AutoCad 2D :: Determining The Area Of A Hatch

Apr 19, 2011

Essentially, I have an odd shape that I fill in with a hatching. SOMETIMES, it will give me the area in the properties window (or when I use the list command). but other times, it will not give me the area.

I just hatched 4 different (but same general shape) areas, and on 3 of them CAD was able to compute the area, but not the 4th hatched area.

I created all 4 hatches using the exact same steps, so I'm not sure what I could be doing wrong. The CAD Tech at the office cant seem to figure it out either .

View 8 Replies View Related

AutoCad :: How To Hatch A Cobble Stone Area

Jan 8, 2003

I'm having a problem here with hatching in AutoCAD 2000. The existing hatch patterns doesn't fulfill my needs and I need something more specific to hatch a cobble stone area. In my aCAD hatch patterns there's not a good hatch for it and I looked that I can do my own pattern using Notepad etc. but unfortunately I don't have a time to do that.

So, my question is: Is there any simple ways to create your own hatch patterns for example like in Microstation where it is very easy to do. There is an option that I can use cells (blocks in ACAD) as hatch patterns.

Or can I maybe download a custom *.pat file from somewhere and use it?

View 9 Replies View Related

AutoCAD Architecture :: Hatch Rotated Area - Alignment

May 10, 2011

Not sure if this is possible, but a coworker said he remembers doing something like this.  I want to hatch an area that has been rotated.  But without knowing what the angle, is it possible to hatch the rotated area so the hatch is orthogonal?  I've attached a pdf to show what I want.

View 5 Replies View Related

AutoCAD 2013 :: HATCH Within Boundaries Of Area To Be Hatched

Aug 30, 2012

When I was using AutoCad 2010 I could HATCH within a cube, circle or within any object that was joined together even if it had text in it would HATCH within the boundaries of the area to be hatched. Now that I use AutoCad 2013 this option does not work as if there is text in the object only a partial area will become hatched. This means I have to MOVE the cube or whatever shape to a place where there is no text inside it, HATCH and then move it back to where I wanted it in the first place.

View 1 Replies View Related

AutoCad :: Conflict Area Between List Command For Hatch And Calculation

Apr 4, 2013

I find conflict area between list command for hatch and calculation.

when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948

View 1 Replies View Related

AutoCad :: Selecting Individual Hatched Area (not Every Other Hatch On Drawing)

Jan 12, 2012

Basically for example (to make this easy to understand) I've got 4 squares with hatches inside and im trying to select one single hatched area in one of the squares (and delete it). But upon selecting it it's selecting the hatches in the other 3 squares (as they were added at the same time). I've carried out a few searches in google etc and experimented with "pickstyle" but with no avail, also I've looked at groups but there are none in the drawing(so I can't ungroup).

I can do it (which I've just realised) by deselecting the boundaries in "edit hatch" but just wondered if there was a quicker way?

View 3 Replies View Related

AutoCAD .NET :: Add Hatch Fill Polyline Area - No Error But Doesn't Show

Oct 25, 2011

I need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.

Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database

[Code] ......

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved