I have trouble manually tracing around an irregular shape, such as a pitcher winding up to pitch a ball. I use the shape editor to outline the figure. When I finish I find that there's two outlines, and they're not connected. Is there some way to get them connected as one complete outline?
View 5 Repliesim using XXP5, i have an irregular polygon or shape which is the space between a curved shapes outline. within this irregular shape, I want to mould the textso it is stretched / destretched to fill the space yet still be readable.
i have tried to convert the text to shapes and then adjust the nodes, but i dont get any nodes making up each letter(!) the mould tool itself doesnt seem to work. the process first involves stretching the font and rotating it to roughly fit it as close as possible.
I have an irregular shape (silhouette of a horse) in a darker color that I need to have cleanly bordered with 1 or 2 pixels (white).
Any hints? -I tried duplicating / desaturate / brighten / transforming the layer and ended up with (predictably) bad results.
I have an irregular 3D solid, a slab with an opening, and I want its coordinates. However, Autocad provides coordinates only for a simple 3D face.
I plan to use 'Xedges' to get its all edges first, and then get coordinates of these lines.
I have a mesh box here, and I need this mesh box had shape like the form I drew with polylines. there is a picture of it. I tryed mesh modeling,but no luck, because I need exactly the shape (of mesh box), that is drawn with polyline
View 1 Replies View RelatedHow can I create the irregular shape?
View 3 Replies View Relatedi already know that in order to get a gradient to follow the outline of an irregular shape you could do a "blend" with smooth colour'
T he problem I'm having is that it's an involved process and most of the time requires too much tweaking - the points in both shapes should be the same and should approximate each other's distances btw the location on both shapes. I'm wondering if there's another, more direct way to, let's say, take a letter and get a falloff gradient in the shape of the letter...
just realised that a drop shadow might work....i need the gradient to eventually become a mask...
I should design a Silicone model for a Breast Cancer Survivor. My problem is the Irregular Geometric Shape of silicone. I tried "Sphere"/ "Loft" commands,but I didn't get my desired outcome! I also drew the 2D base by "Spline"; however,"Extrusion" was not a good option to make it look like a 3D silicone!
View 9 Replies View RelatedI need to divide irregular shapes into equal parts. For example, the attached shape needs to be divided into 10 equal parts. Parametres could be set such as all dividing lines are horizontal.
I need to do this in autocad (2013) if possible.
The closest discussion I found on this was at [URL] ......
I am trying to create a 3D meshed surface from an irregular shaped solid I created using firstly a SPLINE, FILLET, PEDIT, and EXTRUDE. I have a solid in the basic shape now, but I am trying to create a meshed top and bottom (x, y, z,) to change the contours of those surfaces. I have looked at 3DMesh but it asks for (n,M,) coordinates like it is a regular shaped surface (square, rectangle) where one can calculate the required even spacing needed.
My goal is to create in CAD something like a fine art carved piece of wood, with irregular shaping and no straight planes or surfaces.
I have included a basic picture in JPEG format for your review. This is the item from which I am trying in ACAD 2010 to construct into a usable adjustable form so I may parametric for my needs.
How could make big size pipe with irregular section shape by using Civil 3D?
View 5 Replies View RelatedI have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?
How could make big size pipe with irregular section shape by using Civil 3D?
View 3 Replies View RelatedI work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View RelatedI just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
i use the Photo Grafic designer 2013, how do I cut out a shape. For example I want to cut out a car and get rid of the backgound so that I can use the image of the car somewhere else.
View 1 Replies View Related2 numpty questions for DPX
1. Is it possible to add more than one fill to the same shape i.e two elliptical fills to a shape.
2. When you add the shapes together how do you maintain the fills in each shape - I have 3 shapes that i have 'played with' all with one fill (so far !) when i add the shapes together they combine to form a single shape but with only one fill
Is possible convert png to shape ?
View 1 Replies View RelatedIf I type in something like "Book" then highlight it with the selector tool. Then go to Arrange> Convert to Editable Shapes and go back and unclick/click it has not changed into an editable shape.
View 6 Replies View Relatedit's a Line drawing and I "think" I got all the separate lines joined, but it won't convert to a fill-able shape.
View 8 Replies View RelatedURL....i dropped it into xdpx ungrouped everything extracted the france shape and tried to fill it.i check and it is definitely a closed shape.i can manipulate the outline as normal but nothing i do fills it it's definitely not transparent to remedy this i draw a square under it, select both and subtract shapes this gives me a square with france cut out of it then i draw another square inside the former square but outside the france outline i move the square underneath, select both and once again subtract shapes finally i have my shape filled as i require.
View 9 Replies View RelatedWhat is the easiest way to create a triangle shape in DP7? I'm creating a diagram of button mapping for a PS2/PS3 controller. I'm hoping I don't have to draw one free hand.
View 4 Replies View RelatedMy mindset doesn't work properly with shapes - more with lines and curves from point A to point B.
My normal usage of Xara is for banners and posters etc. not art or technical drawing. Anyway, I wanted to create a specific shape in Xara - it's not that I can't create it otherwise (it's very simple to create in CAD and export as PDF - import into Xara), it's that I can't create it in Xara - No matter what I try I cannot create this exact shape. I say exact specifically because I can close to fudge it, that's not the point. How would I go about creating this shape exactly.
Certified.xar
under Photo Clone Tool, there are a few comments, which I'm not sure if they're conflicting or I'm not reading them correctly, but I cannot seem to be able to change the clone shape...:
"After you've drawn your freehand clone shape, you can adjust the smoothness of the line. This is exactly equivalent to the Freehand tool smoothness control. This is only active immediately after you've drawn the clone shape. If you edit the clone outline using the other tools such as the Shape Editor, this control become disabled."
and
"Clone shapes are normal vector editable shapes, and once selected you can switch into any of the normal line or shape editing tool to make further adjustments of the outline."
and
"A photo with clone edits, is stored as a new 'Photo Group' structure. This acts like a normal photo for many purposes (you can resize it, rotate it, enhance it etc, and it will act as a single photo object). But using 'select inside' (Ctrl+click) or using the Page & Layer Gallery to view the group structure, you can select and edit the individual clone objects within the Photo Group."
I created this video to achieve this using Xara P&GD. The video is here and the .xar file you need is attached.
This video shows how to create an angle based object for visual presentation, any object created with this method should not be used in manufacturers drawings where precision is paramount.
I have a shape (an Open Book) that I would like to Fill the two Open (showing) Pages with Text -I thought of just making a smaller than the page text box under page shape for each page; but, then I thought I'd check with You Pros here and see if a Shape could have a 'Text' Fill...?
View 2 Replies View Relatedis it possible maybe to slice a shape which has a outline, but on a way that after the slicing, the two new shapes will not have individual outlines?
Slice_shapes.xar
Basically I can execute that if the outline is created by Contour tool, but is it possible that for shapes with outlines?
I'm trying to add text on both sides of the diagonal line. I want the text to be screen filling, so what I'm trying to achieve is two triangular shaped text boxes.
View 9 Replies View RelatedI cant see why this fails...
1) Import a photo.
2) Freehand draw a shape to surround an interesting part of the image.
3) Intersect the two.
4) Use the Photo tool to crop one edge of the Clipped Photo
Now I want to refine the clipping shape, so I switch to the Shape tool, but there are no longer any nodes to edit!
Switching to Wireframe shows that the clipping shape is still there, and the mouse pointer indicates that I can reshape the lines, but the behaviour is erratic to say the least!
I posted a video (~4MB) showing what I mean HERE
How do I arrange a shape within a group forwards or backwards? I can select the shape in the Page & Layer Gallery, but I cannot drag it higher or lower in the hierarchy. I simply want to move a shape within a group so that it is behind another shape.
View 9 Replies View RelatedI have shape with a 'single tile' bitmap fill and the bitmap is smaller than the shape (which is what I need) but I want the fill of the shape not taken up with the bitmap to be white, however this is defaulting to transparent. I've gotten around this by cloning the shape, setting the fill to flat white and placing it behind the original (bitmap filled) shape. This works fine but is there a way to do this without resorting to this second copy?
View 4 Replies View Related