I should design a Silicone model for a Breast Cancer Survivor. My problem is the Irregular Geometric Shape of silicone. I tried "Sphere"/ "Loft" commands,but I didn't get my desired outcome! I also drew the 2D base by "Spline"; however,"Extrusion" was not a good option to make it look like a 3D silicone!
View 9 RepliesI want to draw a wall with irregular bricks. Meaning these are old elongate bricks that are not exactly rectangular and are not all of the same length.
Here's an example of what I want to achieve:
example.png
Is there any way you can draw an irregular shaped viewport in LT2008 (i.e. not a rectanlge)????
View 9 Replies View RelatedI cant get rounded shape in the irregular form attached. When I have one straight line edge its ok, but when have many edges in an irregular 3d shape it gives me an error message.
Wanted to do the same thing in the yellow pointers that I did in the black one.
I have an irregular 3D solid, a slab with an opening, and I want its coordinates. However, Autocad provides coordinates only for a simple 3D face.
I plan to use 'Xedges' to get its all edges first, and then get coordinates of these lines.
I have a mesh box here, and I need this mesh box had shape like the form I drew with polylines. there is a picture of it. I tryed mesh modeling,but no luck, because I need exactly the shape (of mesh box), that is drawn with polyline
View 1 Replies View RelatedHow can I create the irregular shape?
View 3 Replies View RelatedI need to divide irregular shapes into equal parts. For example, the attached shape needs to be divided into 10 equal parts. Parametres could be set such as all dividing lines are horizontal.
I need to do this in autocad (2013) if possible.
The closest discussion I found on this was at [URL] ......
I am trying to create a 3D meshed surface from an irregular shaped solid I created using firstly a SPLINE, FILLET, PEDIT, and EXTRUDE. I have a solid in the basic shape now, but I am trying to create a meshed top and bottom (x, y, z,) to change the contours of those surfaces. I have looked at 3DMesh but it asks for (n,M,) coordinates like it is a regular shaped surface (square, rectangle) where one can calculate the required even spacing needed.
My goal is to create in CAD something like a fine art carved piece of wood, with irregular shaping and no straight planes or surfaces.
I have included a basic picture in JPEG format for your review. This is the item from which I am trying in ACAD 2010 to construct into a usable adjustable form so I may parametric for my needs.
How could make big size pipe with irregular section shape by using Civil 3D?
View 5 Replies View RelatedI have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?
How could make big size pipe with irregular section shape by using Civil 3D?
View 3 Replies View RelatedI work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View RelatedI have an irregular shape (silhouette of a horse) in a darker color that I need to have cleanly bordered with 1 or 2 pixels (white).
Any hints? -I tried duplicating / desaturate / brighten / transforming the layer and ended up with (predictably) bad results.
I have trouble manually tracing around an irregular shape, such as a pitcher winding up to pitch a ball. I use the shape editor to outline the figure. When I finish I find that there's two outlines, and they're not connected. Is there some way to get them connected as one complete outline?
View 5 Replies View Relatedi already know that in order to get a gradient to follow the outline of an irregular shape you could do a "blend" with smooth colour'
T he problem I'm having is that it's an involved process and most of the time requires too much tweaking - the points in both shapes should be the same and should approximate each other's distances btw the location on both shapes. I'm wondering if there's another, more direct way to, let's say, take a letter and get a falloff gradient in the shape of the letter...
just realised that a drop shadow might work....i need the gradient to eventually become a mask...
im using XXP5, i have an irregular polygon or shape which is the space between a curved shapes outline. within this irregular shape, I want to mould the textso it is stretched / destretched to fill the space yet still be readable.
i have tried to convert the text to shapes and then adjust the nodes, but i dont get any nodes making up each letter(!) the mould tool itself doesnt seem to work. the process first involves stretching the font and rotating it to roughly fit it as close as possible.
I am about to do an animation of silicone/caulk coming out of a tube using a silicone/caulking gun [URL] ... I need to show it somewhat lumpy as it comes out (just like in real world).
Currently I have the caulk/silicone looking lumpy and slightly irregular, with a animated slice modifier so that it appears to be coming out of nozzle, pity i can't link the movement of gun/nozzle to the slice modifier???
is this a sensible way to do it or is their a better way??
I do not understand how to draw a polar array around a rectangular shape. If it were a rectagular dining table of any size how do I array the dining chairs around the table's shape. Alternatively what if I had a large square table and wanted to array 12 chairs with 3 chairs on on each side of the table ????? I get polar arrays around a circle or polygon but do not understand the rectangle concept ???
View 2 Replies View Relatedhow to draw a geodesic dome shape? some sort of lisp routine perhaps...
View 7 Replies View Relatedhow to draw this shape in Photoshop.
View 6 Replies View RelatedI am using PS-CS2
I want to know how to draw a shape outline
I dont want any fill inside the shape
I have a shape that has 2 open faces. How can I draw faces on the shape to close it up?
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
I'm having trouble drawing an egg shape. I drew the oval, then converted to curves. I moved the bottom node up and that made the shape squatty, but I want to move the side nodes out symmetrically. Is there a way to do this? Is there a simpler way to make an egg shape?
View 8 Replies View Relatedhow to draw a simple fish shape that is consist of an oval with 2 pointed ends (the body), and a triangle (tail)? What kind of tools (eg. line or ellipse tools) should I use? Do I need to set the transformation path?
View 9 Replies View RelatedI want to do is draw or make a simple heart shape and I can't figure it out.
View 4 Replies View Relatedis it possible maybe to draw with transparent line in Shape tool?
Currently if I draw a line, make it transparent, the next line as default the same color and width, but does not inherit the transparency. That means it is not possible or just at me
I want to draw a filled shape and edit it later during further design.
I used Path Tool to draw my shape with points. Then I used Selection from Path to create a closed shape, as I can fill it with solid color or patterns.
But how can I edit the shape after it has been filled with color? After using Selection from Path, the shape is independent of the controlling points of Bezier Curve.
In general, how can I draw a closed shape, which is filled with solid color or patterns, but still editable by moving controlling points of Bezier Curve on the border? In other words, when I move the points, the inner color/pattern should be extended.
when i draw a circle in corel draw, i set the height and width dimension to equal, so it should become a circle, but it end up in the monitor screen an oval shape, also i notice the y axis and x axis in the corel draw is not equal. so i check my artcut y and x axis, is also same as corel draw. But when i cut out the shape, it cut out a circle shape. isit due to monitor or other setting.
View 12 Replies View RelatedI am trying to create a logo with an open sided globe. I need to draw a shape like a crescent moon.
Stacked two circles on top of each other with the edge showing, but can't make the part that isn't supposed to be seen transparent.
Not a graphic designer but have used CorelDraw since v.3. (I am using X4)
I have adobe CS5 and when I opened my software today, I discovered my swatches were gone from my tool bar. They are not entirely gone because I can get to them from my swatch libraries, however, I cannot drag and drop these swatches into my toolbar in order to click on them. I am trying to use the pen tool to draw a simple shape and the only swatches that come up is the none option (the white box with the red line going through it) and the registration, which I admitadly don't know much about.
I am using a Mac. I cannot figure out how to draw my shapes without a fill and using a black outline.