is it possible maybe to draw with transparent line in Shape tool?
Currently if I draw a line, make it transparent, the next line as default the same color and width, but does not inherit the transparency. That means it is not possible or just at me
I'd like to draw a line with a certain pressure, but I have no tablet."Bow Tie" is almost the right pressure profile, but it's too thin in the middle. Can I adjust those pressure profiles, create own profiles or anything?
View 5 Replies View RelatedI must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
Using Photo & Graphics Designer 6, can I draw a straight line between two pre-determined points, eg. X=0, Y=0 to X=100, Y==0?
View 5 Replies View RelatedIs there a way to draw a perfectly vertical or horizontal line in Xara (Designer Pro 6) without manually lining it up with the grid? Sometimes I just need an instant horizontal or vertical line and I find I have to turn on the grid, zoom right in and meticulously place the pen tool so that the line is a perfect vertical (90 degrees) or horizontal (180 degrees) without slant or lean. Surely there�s a quicker and more reliable method?
View 8 Replies View RelatedI want to draw a filled shape and edit it later during further design.
I used Path Tool to draw my shape with points. Then I used Selection from Path to create a closed shape, as I can fill it with solid color or patterns.
But how can I edit the shape after it has been filled with color? After using Selection from Path, the shape is independent of the controlling points of Bezier Curve.
In general, how can I draw a closed shape, which is filled with solid color or patterns, but still editable by moving controlling points of Bezier Curve on the border? In other words, when I move the points, the inner color/pattern should be extended.
1. if i draw a line using the line tool.. can i curve it to say 40 degrees like i can with the text function?
2. So ya that one was easy.. hows bout when i want to cut something out ACCURATELY, the pen function, right? (according to a friend)when i make all those little boxes and select the area i want to cut, all that gets copied are the outer lines, which i presume is what ive just drawn.. how do i cut the area inside this?
3. and finally maybe a slightly less easy one- In Paint, when you cut out an object and paste it, you can select for the white of the image to become transparent so you can paste over what you have already.. is thee a feature in PS for this?
I'm working on a project, and all of a sudden when I ad a outline line width to an object the outline seems transparent to me. I can get it to stop doing this with copying other objects in the scene that have a solid line around them, but as soon as I go back to the other items the transparent line width starts happening again.
View 2 Replies View RelatedI have adobe CS5 and when I opened my software today, I discovered my swatches were gone from my tool bar. They are not entirely gone because I can get to them from my swatch libraries, however, I cannot drag and drop these swatches into my toolbar in order to click on them. I am trying to use the pen tool to draw a simple shape and the only swatches that come up is the none option (the white box with the red line going through it) and the registration, which I admitadly don't know much about.
I am using a Mac. I cannot figure out how to draw my shapes without a fill and using a black outline.
A friend of mine show me how to draw a water drop, in three clic using illustrator's pen tool.
He do the folowing:
1)clic and drag:
2) clic and drag:
3) ALT + clic and drag:
and he get (when unselected):
It is possible to do the same using Xara designer pro 5 in three clics ?I think that Xara designer pro 5 is more powerfull than Illustrator, but I don't know how to do the same in three clic.
Every time I use the ellipse tool to draw a shape, a portion of the ellipse is missing. The missing portion is always on the lower right hand side of the ellipse. I am using CorelDraw Graphics Suite X4. I have attached a graphic showing what I mean.
View 3 Replies View Relatedhow to invert the transparency tool on a circular shape, so that the edges are coloured and the centre is clear..?
View 3 Replies View RelatedI like the 3D Tool but is it possible to use the 3D tool to raise the nontransparent part of an imported image while leaving the transparent part flat?
View 3 Replies View RelatedIn Illustrator CS6, I would like to draw these trails for a map I'm making. Is there a way I can draw using the "Pencil" tool where when I draw, it draws a second line next to it? Is there a setting for that?
Here is an old map where you can see the double broken lines. I know how to set it so the line has gaps in it, but I need a line to be the same next to it.
Did the programmers make the pen tool in CC worse or am I missing something. If I draw a path in cc and stroke it with a 2px hard brush the line is extremely jagged/rough. If I do it in CS6 that I own, the line is smooth and very fine. What gives?
View 5 Replies View RelatedI use Photoshop 7 & do a lot of cleanup of bitmap/tiff images, such a logos & symbols that need cleaning up around the edges etc. Holding the shift down while drawing with a brush in eraser, etc. mode creates a straight horizontal line & that makes cleaning a horizontal edge easy & quick.
Is there any keystroke combinations that will draw a perfectly straight vertical line?
a few of my various custom lines and shapes in the Tools Presets saved in CS4 and loaded in CS6 do not transfer with the correct Fill and Stroke they had in CS4. Examples are simple things like a red hollow ellipse, a red arrow, etc.
View 2 Replies View RelatedI use the path tool to create the shape of the text line I want to curve. I enter the text I want with the font, colour, etc, and select text along path. The text goes where I want it, but no matter what I have tried, the text colour along the path (my curved text) is always red and it doesnot look like the font in my text area. I can change the font / colour of the original text which works great, but the text along the path doesn't seem to change.
View 5 Replies View RelatedI created some shape with line tool and added extrude modifier to it. After being converted to editable poly I want edges to be slightly softer. But turbo smooth creates a big mess. Swift loop won't work. Is it because sides are single polygons? Is there an easy way to add edges inside them?
View 3 Replies View RelatedI'm pretty new and have a simple problem that for some reason I can't figure it out! And that is how to make a series of lines on the image that are all perfectly horizontal or perfectly verticle. This will be part of a chart and the lines will be dividers. So the chart will have basically 21 rectangles with 3 rectangles across and 7 rectangles down.
So, I KNOW how to use the straight line tool to make the vertical and horizontal lines but I don't know how to keep the lines perfectly vertical and horizontal and parallel with each other!
"texanandproud"
How to make something like this logo: [URL]... (also attached below in case link d/n work)
I tried using the line selection tool to create a stroke path in the shape of the design I wanted, but I can't get it to emulate this brush (it always just fades to opaque instead of tapering to a point).
I have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?
I just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
I'm sure there's a way to do this but for the life of me I can't remember and can't find it when I do a search. I have an object that is comprised of several lines that are grouped together, and I want to fill the entire group with a fractal cloud 3-color fill. In order to do so, I am creating the fill as a background, and making the object transparent, but when I do that, all my lines disappear (of course!) but I need the lines in it for details. Basically I want to layer this object
View 9 Replies View RelatedI'm trying to use the line tool to drag out an ordinary line, but every time I do, an arrow shape appears. I've tried looking for other shapes, hoping "line" would be one of them, but I couldn't find anything. I've looked at the help file, searched online, but I didn't find anything. All I want to do is drag out a regular line with the line tool, but all it gives me is an arrow. Does anybody know what option I should look at to change the arrow into a line?
View 9 Replies View RelatedI have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View RelatedHow can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View Relatedin autocad we use offset commend to draw a parallel line to another line what we should we use in Chief Architect x2
View 1 Replies View RelatedHow to draw a line that STARTS at a perpendicular angle to another line ???
View 4 Replies View RelatedI don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
I was drawing a lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.
View 3 Replies View Related