I was drawing a lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.
View 3 RepliesCan a Lightroom adjustment brush draw a straight line by clicking the start and stop points?
View 8 Replies View RelatedI want to start measure command from middle of line and insert blocks on specific distance and leave rest on ends of line or arc.
View 5 Replies View RelatedI have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View RelatedHow can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View Relatedin autocad we use offset commend to draw a parallel line to another line what we should we use in Chief Architect x2
View 1 Replies View RelatedHow to draw a line that STARTS at a perpendicular angle to another line ???
View 4 Replies View RelatedI am trying to do a drawing but there's a function I forget. I want to start a line from a section of another line. How to do something to skip a distance from a start point of a line to the position you want.
View 5 Replies View RelatedI don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
I must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
when I (try to ) use Pencil and Brush tools, (cross-hatching), some lines get erased/replaced by the lines drawn close to them. It must have something to do with the preferences, but I am not sure what to change/adjust.
View 2 Replies View Related1. if i draw a line using the line tool.. can i curve it to say 40 degrees like i can with the text function?
2. So ya that one was easy.. hows bout when i want to cut something out ACCURATELY, the pen function, right? (according to a friend)when i make all those little boxes and select the area i want to cut, all that gets copied are the outer lines, which i presume is what ive just drawn.. how do i cut the area inside this?
3. and finally maybe a slightly less easy one- In Paint, when you cut out an object and paste it, you can select for the white of the image to become transparent so you can paste over what you have already.. is thee a feature in PS for this?
For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Is there a way of reversing the start and end points of a line? I have a lot of mirrored lines on my model, and so the direction (start/end) is also mirrored. This poses a problem when i export the model to another program witch has a coordinate system based on the direction of the entity (in this case a line). So i come back to the question, is it possible to change(reverse) the start/end position to already drawn (mirrored) lines? Btw i am using acad2011
View 2 Replies View RelatedWhat to put in the override box to start a second line of text? its autocad 2013
View 2 Replies View RelatedI am having a problem with starts and ends of lines. I have draw two lines, end of first is start of second. The problem is because, (cdr (assoc 11 (entget line1))) and (cdr (assoc 10 (entget line2))), somehow, are not the same,
(= (cdr (assoc 11 (entget line1))) (cdr (assoc 10 (entget line2))))
is returning nil, what is so confusing to me is that:
(=(nth 0(cdr (assoc 11 (entget line1)))) (nth 0(cdr (assoc 10 (entget line2)))))
is returning true, the same is for y and z coordinates.
I need to check x y and z coordinates, for this type of problem...
I know that I can find which points are which by checking the properties, but I am wondering if there is a way to (for example) edit the grips so that they indicate which end is which, like how they are used in dynamic blocks to show how an object can stretch. This isn't a problem that requires an imeediate fix, but would be nice if there were such an option.
View 4 Replies View RelatedI am look at a way to place the start of a line a certain distance away from the end of another endpoint. Is there a more productive way of doing this rather than drawing one line on the x axis and another on the y axis.
View 9 Replies View RelatedAt the top of the clock, how do you draw the curved lines, which say radius of 4.
[URL]........
In model space I draw a line with a particular linetype, say a fence row, and I adjust the linetype scale so that it reads like I want it, but then when I go to paper space, it's just a plain line no matter what I set the linetype scaling to?
View 9 Replies View Relatedhow do we draw a tangent line in autocad
View 1 Replies View RelatedI have created a layer for the dashed lines, but they continue to be solid lines.
View 9 Replies View RelatedI want to load a text file, the file is in X,Y format. I want to draw the line on this file without have to enter the x,y coord one by one.
View 2 Replies View RelatedHow to draw a line with given angle at the end? What is the command?
View 4 Replies View Relatedwhen i draw a line with 4 units in autocad the line seems as small as a point but in the example i watched it was long enough so how can change line length shown and in the another example i watched after clicking the line command and specifying first point the user was typing a length in the command line as 4'7-1/2 and clicking enter.after this the line's direction and length was automatically forming.but when i doing the same it doesnt work.how can i do both of these.
View 9 Replies View RelatedCreating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment. This is a defect that needs fixing.
Meanwhile you'll find me typing in the 93 locations for my sample lines. I believe this is what we made computers for.
My question is: Why certin AutoCad files, I'm not able to draw lines?
I'm in model space. I can move objects. I can even erase/delete things. But I'm tring to edit this shop drawing, i need to add some details, so i need to draw some lines. I use the "l" command. Select my 1st point, then 2nd point. It doesn't work? The Command line keeps saying: Specify next point or [Close/Undo]. But no lines are getting drawn. i finally have to hit escape to end the line command but no lines have gotten drawn. its the same thing if i draw a square or circle. (Not sure if you need to know this but these are my companies files created by a former employee of my company using our own AutoCad. So, i would think if he's locked this file somehow, i should be able to unlock it.)
I am having a problem this morning. When I started AutoCad LT 2012 and opened my drawing, I can only draw a line in one direction. Also, when i insert a block, all I get is a flat line.
View 3 Replies View Relatedhow to drawing a line tangent to two circles in C#?
View 7 Replies View Relatedi want to draw a line long 3 meters and i have to type @ before typing 3. If i dont type @ then there is a problem when i want to dimensioned it - there doesn't appear 3 metres but totaly different number. why that happens?
View 3 Replies View Related