AutoCAD Civil 3D :: Sample Line Increment Not Respected At Start

May 13, 2013

Creating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment.  This is a defect that needs fixing.

Meanwhile you'll find me typing in the 93 locations for my sample lines.  I believe this is what we made computers for.

View 9 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Sample Line Frequency

Jun 4, 2013

I have a road corridor and need to create sample lines at a 50m interval, as well as at every horizontal and vertical turning point. While the 50m stations and the horizontal turning points are easy to add (using the alignment), I can't seem to find where/how to add the vertical points (they have to be extracted from the profile).

Running the Feature Line Report I noticed the horizontal turning points are not used in the report: it only reports the 50m stations (so I guess the same will happen to the vertical points?).

how to add the vertical turning points to the sample line group and how to include both horizontal and vertical points in the Feature Line Report.

View 6 Replies View Related

AutoCAD Civil 3D :: Sample Line Object Snaps?

Jan 9, 2013

I am trying to use object snap (intersection) to position the end of my sample lines at the intersection of the sample line with a polyline. The object snap works with sample lines left of the alignment centerline but not on the right. How do I correct this?

View 2 Replies View Related

AutoCAD Civil 3D :: Sample Line On Alignment With Spiral

Aug 29, 2013

I draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut  down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.

View 9 Replies View Related

AutoCAD Civil 3D :: Sample Line Name Duplicated Exception

Dec 23, 2013

In Civil 3D we can create several new sample line groups and their sample lines can have the same name in other sample line groups.e.g

SLG_1:   

Sample line names:

1
2
3
4

SLG_2:   

Sample line names:

1
2
3
4

However, If I create a new sample line group with API and after new sample lines, if other sample line name(of other SLG) has the same name, Civil 3D throws Exception.

View 2 Replies View Related

AutoCAD Civil 3D :: Export Coordinates Table Of Sample Line?

Apr 15, 2012

 I'm designing a road, but I have a trouble how to export coordinates table of sample lines?

I need a table of coordinates X,Y of sample lines.

View 9 Replies View Related

AutoCAD Civil 3D :: Sample Line Stationing Text Not Updating

Jan 14, 2013

I have some sample lines that highlight utilities needing a section view. I've now moved my sample line to highlight the true cross section stationing for these crossings. Why doesn't the station value update for the sample line once this is moved. For some reason I remember the station text on the sample line updating itself automatically in the past.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Change Labeling Of Sample Line Style

Sep 26, 2011

I am trying to figure out how to change the labeling of my sample line style from (<[Sample Line Number(Sn)]> which out puts a count of 1,2,3,4 etc to output A,B,C,D etc.

View 4 Replies View Related

AutoCAD Civil 3D :: Sample Line / Surface And Cross Sections

Nov 22, 2013

I'm working on cross sections and ran into a problem.  I had to edit my surface but it wouldn't cooperate with me.  So instead, I just erased the whole surface and restarted it.  After I got my surface the way I like it, I added my sample lines to where they are supposed to be.  Problem is, my cross sections turned out blank.

So for now, I skipped to create a surface profile and see both of my surfaces available on the bottom.  The old one I deleted and the newly created one.  It won't let me go to the bottom and erase the old deleted surface.  When I go into my toolspace-prospector....it only shows my newly created surface and nothing more.  Is this a reason why my cross sections come up blank?

I'll show you a pic of my toolspace with just the current surface and another pic of the "create a surface profile" showing that it still has both the old and new (all in CAPS) but it won't let me delete the original.

HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1

View 5 Replies View Related

AutoCAD Civil 3D :: Where Is Setting For Sample Line Label Background Mask

Jun 17, 2013

Where is the setting for the sample line label background mask?  I have some sample lines that will be plotted on top of an aerial photo, and the black box background looks terrible.  I'd like to turn it off.  I found the contour label background fine and I switched those to False without much of a problem, but I can't seem to locate the ones for the sample lines. 

View 1 Replies View Related

AutoCAD Civil 3D :: Export Point Coordinates And Elevations Along Sample Line

Sep 4, 2012

I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines.  The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.

For instance, at station 1+00 of the alignment  we have a sample line.  We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment.  Primarily, whole contour intervals but more information would be useful as well.  I was hoping this could be automatically generated.

View 5 Replies View Related

AutoCAD Civil 3D :: Don't Find SampleLineLabel Property In Sample Line Class

Dec 23, 2013

In "SettingsSampleLine.SettingsStyles" there are the default properties:

 SampleLineSampleLineLabelSampleLineLabelStyleIdSampleLineStyleIdSettingsSampleLine estiloLM = CivilApplication. ActiveDocument. Settings. Get Settings<SettingsSampleLine>();string NombreEstilo=estiloLM.Styles.SampleLine.Value;string NombreEstiloEtiqueta = estiloLM. Styles. SampleLineLabel. Value;

but I don´t find SampleLineLabel property in Sample Line Class¿?Is that property in sample line group?

View 1 Replies View Related

AutoCAD Civil 3D :: Create Sample Line On Option By A Range Of Stations

Nov 20, 2012

I create the sampleline on the option "by a range of stations" so the sample lines were created on the horizontal geometry points. When I change the geometry of the alignament, the sample lines's local change or I need to do the process all over again?

View 1 Replies View Related

AutoCAD Civil 3D :: Add Sample Line To Existing Group - Redistribute Graphs FAIL

Nov 18, 2013

[URL]

Bring that back from the archives... because I am still very fond of redoing hundreds of cross sections because you're incable of redistributing the graphs when a sample line is added to a an existing group... and blow up all of the projections well done.... way to leave out a super critical dynamic component.

PPD        E P I C           F A I L

There is some unbelievable gaps in the software but how do you let this one go on for so long?  

Dell Precision T3500 - Xenon W3550 @ 3.07 (4 core)
Ram @ 12Gb
64bit Win7 Pro
Samsung SSD
NVIDIA Quadro 2000 - Dual Monitors
Cat 6 network with GlobalScape Avail Agent - WAFS
Infrastructure Design Suite Premium and Civil 3D 2012

View 1 Replies View Related

AutoCAD Civil 3D :: How To Insert Data Of Sample Line In Road Profile - Height And Length

Oct 21, 2013

I made an alignment of road, inserted with sample line, then i made a profile. But on the sample line on profile, there is not a data of height and lenght of profile. How to get those data in road profile. I can manually draw that, but i think there is an easier way? 

View 1 Replies View Related

AutoCAD Civil 3D :: Material Volume Table Stationing Doesn't Match Sample Line Group

Mar 5, 2013

(I'm using Civil 3D 2011)

I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]

View 2 Replies View Related

VideoStudio :: Sample Start Time Is After Sample End Time

Oct 12, 2011

I have bought an Easycap capture device and it is installed properly. However when I try to capture video from VHS I get the message "The sample start time is after the sample end time"

View 4 Replies View Related

AutoCAD Civil 3D :: What To Put In Override Box To Start Second Line Of Text

May 24, 2012

What to put in the override box to start a second line of text? its autocad 2013

View 2 Replies View Related

AutoCAD Civil 3D :: Sample Line Volume Report And Surface Volume Give Different Quantities

Jun 18, 2012

I'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.

My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.

The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.

What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.

View 2 Replies View Related

AutoCAD Civil 3D :: Code To Display Station Of Feature Line At Start Of Segment

Mar 13, 2012

I have a feature line, and a labels table created for it. The table has the following columns: Line or Curve #, Station, Segment Start X, Segment Start Y, Segment Start X, Bearing/Delta, Length, Radius, Grade Ahead.

what code I need for the table to display the station of the feature line at the start of the segment?

I also have an alignment with the same stationing over top of the feature line, but Im not sure how to code a reference text into the table either. I can create an end segment reference text for the plan view labels but even if I copy that code into the labels table it doesn't work.

View 4 Replies View Related

GIMP :: Setting Increment Angle Of Straight Line

Mar 21, 2013

I notice that when I hit shift to create a straight line, it seems to be straight in about 1° increments.

Is there anywhere that I can specify the increment angle? Mostly, I make 90° straight lines, so I'd like to up this increment so that there is a more noticeable space in between the increments.

View 2 Replies View Related

AutoCAD Civil 3D :: Get Profile Start And End Labels To Appear Even After Checked Label Start Station

Feb 22, 2012

I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Get Station Label Increment

Aug 13, 2012

I have an alignment that starts at station 1+00 and runs through 20+00.

By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.

As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.

View 5 Replies View Related

AutoCAD Civil 3D :: Add Increment Alphabetic Labels In Alignment?

Feb 23, 2012

I'm being asked to add a increment alphabetic labels to  my alignment 

ex: A1 A2 A3

View 4 Replies View Related

AutoCAD Civil 3D :: Change Station Increment To 25 Feet And Have Labels

Nov 12, 2013

I have an alignment and have station labels.  The alignment is labeled with "Major Stations" at every 100 feet.  I need to change the station increment to 25 feet and have labels.  I have done this although station 1+25 is still reading 1, station 1+50 is reading 1, etc.  There is a precision variable somewhere, and I can't figure it out.  I have played with the alignment labels style but no luck.  Is there a global drawing settings somewhere that might be controlling this?

View 2 Replies View Related

AutoCAD 2013 :: Draw A Line From End Of Line To Start

Jul 31, 2013

I was drawing a  lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.

View 3 Replies View Related

AutoCAD Civil 3D :: Change Major Stations Increment For Multiple Alignments

Oct 22, 2013

Is it possible to change the Alignment Labels Major Stations Increment for multiple Alignments ?I have 50+ Alignments. Each of them labelled with 100m increment for major stations.I would like to change them to 50m interval.

View 2 Replies View Related

AutoCad :: Start Line From The Section Of Line?

Jan 10, 2013

I am trying to do a drawing but there's a function I forget. I want to start a line from a section of another line. How to do something to skip a distance from a start point of a line to the position you want.

View 5 Replies View Related

AutoCAD Civil 3D :: How To Use The Sample API

Oct 26, 2012

How I could use on of the sample Civil 3D API that is provided? In particular, I would like to use the Export to Excel Sample API provided at the following location during the install:

C:Program FilesAutodeskAutoCAD Civil 3D 2013SampleCivil 3D APIDotNetCSharpPipeDataExcel

I am not a programmer and can not just load this sample as it is a .cs file.  How would I go about using the code already provided to create a plugin into my AutoCAD to be able to use this command?

View 3 Replies View Related

AutoCAD Civil 3D :: Sample Lines

Jul 3, 2008

I'm trying to create sample lines at sta. 0+58, 1+08, 1+58, 2+08......................

My alignment begins at 0+00.

In the Create Sample Lines - By Station Range I set the From Alignment Start?end both to false and set the start and end stations as 0+58 and 20+58 respectively. The 0+58 sample line plots at 0+58 but the rest of the sample lines plot at even 50' stations (1+00, 1+50...).

View 9 Replies View Related

AutoCAD Civil 3D :: Widths Of New Sample Lines

Dec 22, 2013

how to create a new sample line group and a new sample lines within that slg: URL....I have checked what is the default sample lines width  (create sample lines command):

Autodesk.Civil.Settings.SettingsCmdCreateSampleLines SobreanchosSamples = default(Autodesk.Civil.Settings.SettingsCmdCreateSampleLines); SobreanchosSamples = civilDoc.Settings.GetSettings<Autodesk.Civil.Settings.SettingsCmdCreateSampleLines>(); Settings Cmd Create SampleLines SettingsCmdSwathWidths anchos = SobreanchosSamples.SwathWidths; double anchoIzquierda = Convert.ToDouble(anchos.LeftSwathWidth); double anchoDerecha = Convert.ToDouble(anchos.RightSwathWidth);

But how can I put these values (left width and right width) for a new sample line?Sample line class doesn't have "left width" or "right width" property ¿? Do I have to create a new vertex? However I think that I can´t add new vertex in vertex collection.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved