AutoCAD Civil 3D :: Material Volume Table Stationing Doesn't Match Sample Line Group

Mar 5, 2013

(I'm using Civil 3D 2011)

I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]

View 2 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Sample Line Stationing Text Not Updating

Jan 14, 2013

I have some sample lines that highlight utilities needing a section view. I've now moved my sample line to highlight the true cross section stationing for these crossings. Why doesn't the station value update for the sample line once this is moved. For some reason I remember the station text on the sample line updating itself automatically in the past.

View 2 Replies View Related

AutoCAD Civil 3D :: Sample Line Volume Report And Surface Volume Give Different Quantities

Jun 18, 2012

I'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.

My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.

The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.

What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.

View 2 Replies View Related

AutoCAD Civil 3D :: Add Sample Line To Existing Group - Redistribute Graphs FAIL

Nov 18, 2013

[URL]

Bring that back from the archives... because I am still very fond of redoing hundreds of cross sections because you're incable of redistributing the graphs when a sample line is added to a an existing group... and blow up all of the projections well done.... way to leave out a super critical dynamic component.

PPD        E P I C           F A I L

There is some unbelievable gaps in the software but how do you let this one go on for so long?  

Dell Precision T3500 - Xenon W3550 @ 3.07 (4 core)
Ram @ 12Gb
64bit Win7 Pro
Samsung SSD
NVIDIA Quadro 2000 - Dual Monitors
Cat 6 network with GlobalScape Avail Agent - WAFS
Infrastructure Design Suite Premium and Civil 3D 2012

View 1 Replies View Related

AutoCAD Civil 3D :: Export Coordinates Table Of Sample Line?

Apr 15, 2012

 I'm designing a road, but I have a trouble how to export coordinates table of sample lines?

I need a table of coordinates X,Y of sample lines.

View 9 Replies View Related

AutoCAD Civil 3D :: SSA Max HGL Doesn't Match Between Profile Plot And Table

Aug 22, 2011

It's my first time using SSA, and I had finally created a network and storm that I thought was working properly (using TR-20 routing with an SCS II storm), until I took a closer look at the profile outputs - and noticed that the graphed Max HGL line does not match the Max HGL listed in the table below.  The difference was 856.2 on the graph and 858.01 on the table at one my structures, for example.

The ability to import pipe networks is nice in SSA, but if the output data is always this wacky I may have to go give up on SSA and go back to using Hydrocad.

View 9 Replies View Related

AutoCAD Civil 3D :: Add Sample Lines To Specific Group

Apr 11, 2008

How or if you can add sample lines to a specified group? I created a group only to realize that there are some specific stations I need. I do not want to re-create the group and re-assign the materials nor reproduce my volume reports. I just want the section plotted on my sheets.

View 3 Replies View Related

AutoCAD Civil 3D :: Stationing Along Alignment Line Is Missing?

Jun 27, 2013

The stationing along my alignment line is missing. I do believe it was there yesterday at 5 but hey who knows. How do I restore it the PI stationing is there.

View 4 Replies View Related

AutoCAD Civil 3D :: How To Compute Volume Of Material Bounded By Three Surfaces

Aug 16, 2012

How to compute volume of material bounded by three surfaces in a section view?

View 1 Replies View Related

AutoCAD Civil 3D :: Volume Range Table

Apr 19, 2012

I am using C3D 2012 and i know how to create a table showing volumes for different elevation ranges with different colours, but how to show the total cut or fill for the volume surface in the same table so that you dont have to manually add up all of the cuts or fills? or have to display only two ranges?

View 1 Replies View Related

AutoCAD Civil 3D :: Total Volume Table - Zero Values

Nov 20, 2012

Attached are two files: 1 file has 0 values on the volume table, and the other file has Sample line group Properties.

Surface 3 is the surface that has the existing actual survey points . Do I have to pick another surface : the other two are the surfaces I created in the Corridor as surface boundaries , Top and Datum

View 1 Replies View Related

AutoCad :: Circle Radius Doesn't Match Up With Line Length

Apr 26, 2011

I'm trying to plan an access road which must run at least 2.5m away from an existing fenceline. I've put a few parallel road lines in at 3m distance, but at the fence bends I decided to put some circles at the bend points to give me a 3m radius. When I did this I was suprised to find that the circle extends further than my access road. I've dimensioned them both up, CAD is telling me they're both 3m away but they're clearly not at the same distance.

View 9 Replies View Related

AutoCAD Civil 3D :: Get Volume Elevation Table Masking To Work?

Dec 12, 2007

How to get the Volume Elevation Table masking to work?

I can only get the Title to work correctly - everything else plots as a black blob if Fill is on. With Fill off - there is no mask.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Calculate In A Table The Volume Of Cut And Fill Between The Stations

Sep 18, 2012

How to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.

View 3 Replies View Related

AutoCAD Civil 3D :: Total Volume Table Missing In Layout?

May 12, 2013

I have just created a Total Volume Table and everything is perfect in Model, but when y change to layout, the table is miising. I can barely see the title of the table zooming, but anything else. The tables are still there, but so tiny and with just the title, there is no data! 

View 1 Replies View Related

AutoCAD Civil 3D :: Volume Table Display In Viewport Is Staked?

Jun 22, 2012

about a Volume Table style, where I have correctly showing in Model Space and is "Split" in the Table Properties.  This is a "Total Volume Table" and is Dynamic.

Just Fine in Model Space... yet is showing within a Viewport (typ. plan sheet) that each Split is simply Staked ontop of each other ?

Thought I (we) came across this a few years ago... yet no issues latetly till now, and also mainly first time I've likely split the Table in R2012 (currently used).

Have maintaining View Orientation "true", yet still nothing.....

Xi Computer (Win7 64bit O.S.)
i7 3770K @ 4.5GHz Sealed Water Cooler
Quad Core w/ Asus P8Z77-V LE mobo
16GB DDR3 @ 1600Mhz RAM
15K Seagate SCSI H.D.
Nvidia Quadro 2000 (span2) + FX4600 (3)
ViewSonic VS2436 series displays (3)

View 4 Replies View Related

AutoCAD Civil 3D :: Sample Line Frequency

Jun 4, 2013

I have a road corridor and need to create sample lines at a 50m interval, as well as at every horizontal and vertical turning point. While the 50m stations and the horizontal turning points are easy to add (using the alignment), I can't seem to find where/how to add the vertical points (they have to be extracted from the profile).

Running the Feature Line Report I noticed the horizontal turning points are not used in the report: it only reports the 50m stations (so I guess the same will happen to the vertical points?).

how to add the vertical turning points to the sample line group and how to include both horizontal and vertical points in the Feature Line Report.

View 6 Replies View Related

AutoCAD Civil 3D :: Sample Line Object Snaps?

Jan 9, 2013

I am trying to use object snap (intersection) to position the end of my sample lines at the intersection of the sample line with a polyline. The object snap works with sample lines left of the alignment centerline but not on the right. How do I correct this?

View 2 Replies View Related

AutoCAD Civil 3D :: Sample Line On Alignment With Spiral

Aug 29, 2013

I draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut  down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.

View 9 Replies View Related

AutoCAD Civil 3D :: Sample Line Name Duplicated Exception

Dec 23, 2013

In Civil 3D we can create several new sample line groups and their sample lines can have the same name in other sample line groups.e.g

SLG_1:   

Sample line names:

1
2
3
4

SLG_2:   

Sample line names:

1
2
3
4

However, If I create a new sample line group with API and after new sample lines, if other sample line name(of other SLG) has the same name, Civil 3D throws Exception.

View 2 Replies View Related

AutoCAD Civil 3D :: Sample Line Increment Not Respected At Start

May 13, 2013

Creating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment.  This is a defect that needs fixing.

Meanwhile you'll find me typing in the 93 locations for my sample lines.  I believe this is what we made computers for.

View 9 Replies View Related

AutoCAD Civil 3D :: How To Change Labeling Of Sample Line Style

Sep 26, 2011

I am trying to figure out how to change the labeling of my sample line style from (<[Sample Line Number(Sn)]> which out puts a count of 1,2,3,4 etc to output A,B,C,D etc.

View 4 Replies View Related

AutoCAD Civil 3D :: Sample Line / Surface And Cross Sections

Nov 22, 2013

I'm working on cross sections and ran into a problem.  I had to edit my surface but it wouldn't cooperate with me.  So instead, I just erased the whole surface and restarted it.  After I got my surface the way I like it, I added my sample lines to where they are supposed to be.  Problem is, my cross sections turned out blank.

So for now, I skipped to create a surface profile and see both of my surfaces available on the bottom.  The old one I deleted and the newly created one.  It won't let me go to the bottom and erase the old deleted surface.  When I go into my toolspace-prospector....it only shows my newly created surface and nothing more.  Is this a reason why my cross sections come up blank?

I'll show you a pic of my toolspace with just the current surface and another pic of the "create a surface profile" showing that it still has both the old and new (all in CAPS) but it won't let me delete the original.

HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1

View 5 Replies View Related

AutoCAD Civil 3D :: Where Is Setting For Sample Line Label Background Mask

Jun 17, 2013

Where is the setting for the sample line label background mask?  I have some sample lines that will be plotted on top of an aerial photo, and the black box background looks terrible.  I'd like to turn it off.  I found the contour label background fine and I switched those to False without much of a problem, but I can't seem to locate the ones for the sample lines. 

View 1 Replies View Related

AutoCAD Civil 3D :: Export Point Coordinates And Elevations Along Sample Line

Sep 4, 2012

I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines.  The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.

For instance, at station 1+00 of the alignment  we have a sample line.  We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment.  Primarily, whole contour intervals but more information would be useful as well.  I was hoping this could be automatically generated.

View 5 Replies View Related

AutoCAD Civil 3D :: Don't Find SampleLineLabel Property In Sample Line Class

Dec 23, 2013

In "SettingsSampleLine.SettingsStyles" there are the default properties:

 SampleLineSampleLineLabelSampleLineLabelStyleIdSampleLineStyleIdSettingsSampleLine estiloLM = CivilApplication. ActiveDocument. Settings. Get Settings<SettingsSampleLine>();string NombreEstilo=estiloLM.Styles.SampleLine.Value;string NombreEstiloEtiqueta = estiloLM. Styles. SampleLineLabel. Value;

but I don´t find SampleLineLabel property in Sample Line Class¿?Is that property in sample line group?

View 1 Replies View Related

AutoCAD Civil 3D :: Create Sample Line On Option By A Range Of Stations

Nov 20, 2012

I create the sampleline on the option "by a range of stations" so the sample lines were created on the horizontal geometry points. When I change the geometry of the alignament, the sample lines's local change or I need to do the process all over again?

View 1 Replies View Related

AutoCAD Civil 3D :: How To Insert Data Of Sample Line In Road Profile - Height And Length

Oct 21, 2013

I made an alignment of road, inserted with sample line, then i made a profile. But on the sample line on profile, there is not a data of height and lenght of profile. How to get those data in road profile. I can manually draw that, but i think there is an easier way? 

View 1 Replies View Related

AutoCAD Civil 3D :: Adding Missed Line To Line Table

Feb 5, 2013

I have created an easement after I selected the line callouts and created my parcel table I realized I missed selecting one of my line labels and it is missing from my table. I know I can just erase the table and then reselect all line callouts to create a NEW table, but I was wondering if there was a way to just select the line callout I missed and have it added to the parcel table without recreating a new one.

View 3 Replies View Related

AutoCAD Civil 3D :: Print Doesn't Match Preview Alignment Data Reference

Jul 12, 2013

I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.

When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.

Preview and pdf attached.

C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD Civil 3D :: Match Line Text Not Plotting

Jun 12, 2013

I am using Civil 3D 2011 because of a contract. Monday I created the View Frames and cut the sheets. As of this morning everything was printing properly. Over the day I added alignment labels to the sheets and other call outs, and now the Match Line text is not printing.

I have moved the match line object to the top of the drawing order, double checked the layer to verify that it is not set to no plot, and verified that the xref with the match line is on the top of the drawing order.

Attached is a screen capture of the corner PDF I plotted.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved