How or if you can add sample lines to a specified group? I created a group only to realize that there are some specific stations I need. I do not want to re-create the group and re-assign the materials nor reproduce my volume reports. I just want the section plotted on my sheets.
View 3 Replies[URL]
Bring that back from the archives... because I am still very fond of redoing hundreds of cross sections because you're incable of redistributing the graphs when a sample line is added to a an existing group... and blow up all of the projections well done.... way to leave out a super critical dynamic component.
PPD E P I C F A I L
There is some unbelievable gaps in the software but how do you let this one go on for so long?
Dell Precision T3500 - Xenon W3550 @ 3.07 (4 core)
Ram @ 12Gb
64bit Win7 Pro
Samsung SSD
NVIDIA Quadro 2000 - Dual Monitors
Cat 6 network with GlobalScape Avail Agent - WAFS
Infrastructure Design Suite Premium and Civil 3D 2012
(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
I'm trying to create sample lines at sta. 0+58, 1+08, 1+58, 2+08......................
My alignment begins at 0+00.
In the Create Sample Lines - By Station Range I set the From Alignment Start?end both to false and set the start and end stations as 0+58 and 20+58 respectively. The 0+58 sample line plots at 0+58 but the rest of the sample lines plot at even 50' stations (1+00, 1+50...).
how to create a new sample line group and a new sample lines within that slg: URL....I have checked what is the default sample lines width (create sample lines command):
Autodesk.Civil.Settings.SettingsCmdCreateSampleLines SobreanchosSamples = default(Autodesk.Civil.Settings.SettingsCmdCreateSampleLines); SobreanchosSamples = civilDoc.Settings.GetSettings<Autodesk.Civil.Settings.SettingsCmdCreateSampleLines>(); Settings Cmd Create SampleLines SettingsCmdSwathWidths anchos = SobreanchosSamples.SwathWidths; double anchoIzquierda = Convert.ToDouble(anchos.LeftSwathWidth); double anchoDerecha = Convert.ToDouble(anchos.RightSwathWidth);
But how can I put these values (left width and right width) for a new sample line?Sample line class doesn't have "left width" or "right width" property ¿? Do I have to create a new vertex? However I think that I can´t add new vertex in vertex collection.
I have my surface, aligment and sample lines created, but I cant get my sample lines profiles.
The grid apperas without data, it is like I have never selected a surface, but I did !
This is what I get , totally empty
I have an alignment with sample lines, I need to export these to a new drawing. i tried export/import land xml, but it did not work.
View 4 Replies View RelatedWhy the sample lines don’t appear on the prospector?
I’m wondering why the sample lines don’t appear on the prospector like other components such that we can have an access to delete them, for example.
How can I get a list for all the sample lines?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Can we automatically add sample lines at vertical curve points (e.g. BC, EC, Bottom of curve) ?I need to show the sections at these vertical curve key points.
I am using C3D 2011 but could not find that option when creating sample lines in a station range.
Im trying to place sample lines along a very sinuous alignment and about a third of the way down all of a sudden the little tracking marker jumps to what seems like thousands of kilometers away and starts tracking along some invisible alignment which does not exist?
I have tried everything I can think of from every type of sample line creation option to recreating the alignment and auditing the drawing. Nothing I do creates different results. Is this an alignment issue and being cause by all the tight bends?
I need to create points with surface elevations along sample lines. The points need to represent the verticies one would see in the section editor. I've attached an image of my section editor for one of my sample lines. I need to create points that represent these 24 verticies along this sample line and do so for the rest of my sample lines as well. Is there an automated process to create these points?
View 1 Replies View RelatedI wanna interpolate points from surface but only in that area where my sample lines intersecting with the surface. There is a point creation tool that makes this based on polylines but I have to many data and it will get to much time to do this. So, for better understanding I attached some pictures, in the first picture it is shown the final result which I have made based on polylines, but here is also a problem, the tool is not putting points where the surface is changing ( on my second picture I highlighted with red circles).
View 5 Replies View RelatedI created sample lines and section views for my road projects. I set all line works to appropriate layers except for "Segment and Points". Cannot change from layer "0".
I right click the existing grade on my section views, click "edit section style", click "display", then change the layer of Segments and points and click "OK", "apply".
Go back to my drawing, verify the layer but still layer "0". I tried so many times, read the manual, call friends but no luck. I am tempted to "explode" my drawing.
recommend a good way to indicate the location of cross section sample lines in a profile view (of same alignment) as vertical lines? the sample lines have been created at user defined locations from polylines, and do not follow a particular station order. my first thought was to use transparent command to draw line in profile view using station from plan view, but i have in excess of 100 cross sections, and that may be time consuming.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
On several occasions I have had to convert a group of lines to polylines but had to select and convert each line one after the other. Instead of one after another is there a way or a command to select all the lines and convert them as group into polylines?
View 7 Replies View RelatedIs there an easy way to get co-ordinates targeting the edge of road and daylight features along a corridor at 20m intervals without manually going through it or using createpointsfromcorridor?
View 4 Replies View RelatedI'm using feature lines created from utilities line work to label utility locations on section views. To avoid selecting each individual section view, I'm using Profile & Section Views, Section views, Project Objects To Multiple Section Views. This works great. Labels are placed on the Sections Views all at once, just requiring a little clean up of label locations. However, there are feature lines for other purposes in the drawing, and these are all labeled at the same time. Any way to select which feature lines will be projected? I've been erasing the extra labels, which is still faster then placing one label at a time per section view.
Win 7 64BIT
C3D 2013
Why my AutoCad 2009 will not let me select new layers to a specific group layer filter. It was working just fine and yesterday all of sudden it will not let me add new layers to a specific filter. Is there a button or command that maybe would have changed that function. Everything else seems to be working on the Layer Manager.
View 3 Replies View RelatedI'm currently going over the Metric tutorial for ACA 2009. At some point, I'm instructed to right-click the tool palette title bar to select the "project-specific" palette (which should be located among the Design, Visalization, etc palettes). Well, this palette is not there.
I´ve checked the project properties and verified that Project Tool Palette Group is set to Shared workspace catalog. The paths are correct (I'm using Windows 7 x64), etc. When I open antoher tutorial project (Steel Framed Residence_m) the project tool palette is there, but when I create any new project or use the one in the tut, this group/palette is not created.
The profile used to create the project is the default:
C:ProgramDataAutodeskACD-A 2009enuTemplateTemplate Project (Metric)Template Project (Metric).apj
I have a quite large Photoshop document where I've drafted up a number of pages for a website, and I require guides which are specific to certain layers or groups, and not just to the whole document. Is this possible? Any plugins which serve this purpose, or functionality I'm missing?
I'm using Photoship CS6 on a Mac OSX 10.8.3
I think I might be doing this wrong, I am trying to get contents of a specific textFrame within first group on layer called "page numbers"
It seems to work, but is a bit sketchy, the documentation indicates textFrame is all the text frames in a document, and that textFrameItem should be the specific one within collections of groups etc, maybe I am misunderstanding. this is what I am using:
var existingPageNumbers = app.activeDocument.layers.getByName('page numbers').groupItems[0].textFrames[0].contents;
is this correct approach...?
How I could use on of the sample Civil 3D API that is provided? In particular, I would like to use the Export to Excel Sample API provided at the following location during the install:
C:Program FilesAutodeskAutoCAD Civil 3D 2013SampleCivil 3D APIDotNetCSharpPipeDataExcel
I am not a programmer and can not just load this sample as it is a .cs file. How would I go about using the code already provided to create a plugin into my AutoCAD to be able to use this command?
I have a road corridor and need to create sample lines at a 50m interval, as well as at every horizontal and vertical turning point. While the 50m stations and the horizontal turning points are easy to add (using the alignment), I can't seem to find where/how to add the vertical points (they have to be extracted from the profile).
Running the Feature Line Report I noticed the horizontal turning points are not used in the report: it only reports the 50m stations (so I guess the same will happen to the vertical points?).
how to add the vertical turning points to the sample line group and how to include both horizontal and vertical points in the Feature Line Report.
I am trying to use object snap (intersection) to position the end of my sample lines at the intersection of the sample line with a polyline. The object snap works with sample lines left of the alignment centerline but not on the right. How do I correct this?
View 2 Replies View RelatedHow can I sample more sources in my profile view? I added a new surface that I want to see on my profile, but it doesn't show the "sample more sources" option like the sections do..
View 2 Replies View RelatedI draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.
View 9 Replies View RelatedI have an Object ARX application where I consult a TIN surface for elevation samples. I need several thousand point's elevations in a straight line.
I have the surface declared as
CComQIPtr<IAeccTinSurface> mTINSurface;
And given coordinates (x,y) I can easily and successfully find the elevation using
//x and y are given double valuesdouble z;HRESULT result = mTINSurface->FindElevationAtXY(x, y, &z);
//+error treatment
This, however, takes a lot of time when I have to do it thousands of times inside a for-loop varying the x-coordinate. Reading the documentation on IAeccSurface I found the Sample Elevation method (I don't paste the link here, it's pointing to 'invalid HTML' and forbidding me to post). In the hopes of improving performance, this is what I tried:
SAFEARRAY* safearray;SAFEARRAYBOUND bound;bound.lLbound = 0; //zero-basedbound.cElements = number_elements; //does this define the number of samples?safearray = SafeArrayCreate(VT_I8, 1, &bound); //zero based, safe array of X,Y,Z doubles
CComVariant variant(safearray);variant.vt = VT_ARRAY | VT_I8; //type: safe array of doubleHRESULT result = mTINSurface->SampleElevations(x,y,n_x,y,&variant); //sample in line
This is what I took from the description given by the documentation; that the last parameter should be a "VARIANT containing a zero based, one dimensional safe array of X, Y, Z values. ". My problem is that 'result' is always E_FAIL - and I'm not sure why - and 'safe array' is filled with zeroes.
I have the following questions:
Am I passing the right parameters? I have little experience with VARIANT and SAFE ARRAY types.Does the entire Sample Elevation operation fails whenever a single elevation cannot be found? (I have sections without elevation information in the surface - I'm sure the first point (x,y) DOES have a valid elevation value, though). Would I really see performance gain by using Sample Elevation instead of multiple FindElevationAtXY, as I assumed?When calling Sample Elevation, I'm not entirely sure how the sampling is considered. Does the method recognize the size of the array and divides the distance between the initial point and ending point equally, resulting in that many samples?
In Civil 3D we can create several new sample line groups and their sample lines can have the same name in other sample line groups.e.g
SLG_1:
Sample line names:
1
2
3
4
SLG_2:
Sample line names:
1
2
3
4
However, If I create a new sample line group with API and after new sample lines, if other sample line name(of other SLG) has the same name, Civil 3D throws Exception.
I have an ObjectARX application where I consult a TIN surface for elevation samples. I need several thousand point's elevations in a straight line. Initially, I was making thousands of FindElevationAtXY calls, but that proved to be somewhat slow, so I searched and found SampleElevation in the documentation and was hoping it'd provide me with performance gain.
I had some problems, due to my inexperience with VARIANT and SAFEARRAY types, but now I get what seems to be correct results when passing an initial and ending point. Here's a code snippet of my call, which succeeds and gives me the correct elevations;
HRESULT result = mTINSurface->SampleElevations(x,y,n_x,y,&variant); //sample in line
Note that I'm sampling a line along the x-axis (y constant).
The problem i'm facing is that the number of samples along the line provided by the method is far smaller than I expected. I need thousands of points along this line (in fact, I want all points with exact round x-coordinates), and no matter what size I provide for the safe array of doubles given by 'variant', I get only a few hundred points. Furthermore, I've checked and the offset between any two points in the resulting sample is not constant, nor are they the same when I sample a different line (increase y coordinate by one).
Here are my questions: Why are these points chosen by the method - I mean, are they chosen because they are somehow 'significant'?Is there a way to specify the number of points I want along this line?Would it be at all possible to determine a constant offset for the samples (i.e., I want coordinates at specific points x-units apart from each other)?
I just got a topographic map of some land we plan to develope, and would like to work out some preliminary earthmoving analysis.
I would like to sample that surface at very specific locations -- I could produce the required points in PNE format.
What I want is to find the way to: (1) import those points, (2) sample elevation from the surface at those locations, and (3) export the 3D poitns in PNEZ format.
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?