Is there an easy way to get co-ordinates targeting the edge of road and daylight features along a corridor at 20m intervals without manually going through it or using createpointsfromcorridor?
View 4 Replies
I created a surface corridor, called STAGE 1, that I would like to target with a second corridor, STAGE 2. In a new file, I data referenced in STAGE 1 surface. It is showing up as an option for me to use as a target in my STAGE 2 corridor properties. Once I look at my sections it shows there is nothing targeted on that side.
View 1 Replies View RelatedFor some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
View 9 Replies View RelatedHere is the problem; corridor and its surface, etc are designed but there is no "obvious" way to get coordinates in order to layout the road in the field. There is the option to get COGO points from corridor via "create COGO POINTS" / "CREATE GROUND DATA" but this option refers only to points based on baseline in any station of the corridor and not in any station i would like to.
View 5 Replies View RelatedI am trying to find a way to target specific pixels of a certain color and value range. The Color Range dialog does not produce the desired effect. For instance the white pixels bleeding throughthe fabirc. What is the proper way to select these pixels
View 4 Replies View RelatedI created a simple corridor for a road widening. I want to plot some drawings but I do not want the frequency lines to plot. I have frozen the layers containing these lines. I have also set the layers to not plot in the layer properties manager. The frequency lines still plot. I've obviously missed something. What do I need to do to stop the frequency lines from plotting?
View 4 Replies View RelatedI am having an issue where I have set through my codes that i do not want to view the frequecy lines in my corridor. It is displaying right but when i go to print all the frequency lines print. the attached images show my screen of what i am looking at and the other is a pdf of what prints.
View 4 Replies View RelatedI am using the Mill&Overlay sub set to overlay an semetrical road and a crown offset of zero. I one file the crown point feature line has gaps in it and in another file it zig zags along the road.
I forgot to mention that the triangles and the cross section look as expected. trouble is I want the crown profile
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have a road corridor with feature lines connecting the road edges (cyan), ditchline (dark green), daylight_cut (yellow), daylight_fill (green) and daylight (white). At certain random locations along this corridor I am getting feature lines which span from one station to another, ignoring all of the corridor sections in between. The image below shows a daylight_fill line spanning over 60m, even though there is a daylight line through this region.
In this area a ditch line and a daylight_cut start at 4+110, skip over the next cut section at 4+120 and jump over a hundred meters to the next piece of ditch at 4+280..This corridor builds clean - no error messages reported.
Is this the only way to extract feature lines from a corridor i.e. selecting each one - it gets a bit tedious.
Is there any method to select a corridor and extract all the feature lines that are set to display?? I think third party software (Sincpac?) can do this but this is not an option for me and I am not well versed enough in .NET to write something to achieve this myself.
No feature lines in offset corridor
View 3 Replies View RelatedHow to turn off the frequency lines in my corridor. I know it has something to do with codes and styles but I just can't seem to get it to work.
View 2 Replies View RelatedBecause there is a PI in my alignment, the section lines in my corridor are overlapping creating problems with the surface. Is there anything that I can do in this situation?
View 6 Replies View RelatedHow do I make my corridor feature lines to change color? I want daylight cut to be red and daylight fill to be green.I've checked under "Toolspace/Settings/General/Multipurpose styles/Feature line styles/Corridor daylight line - Cut" but it doesn't work.
View 4 Replies View RelatedI need to snap to some feature lines in my corridor, i.e. Back_Curb, Flowline_Gutter, etc, and I have the drawing containing the corridor I need to snap to as an XREF. I can snap to other objects in the XREF, but not the Corridor Feature Lines themselves. Apparently, after some digging, Autocadd hasn't come up with a solution for this problem, and many others have the same issue. I run C3D 2012, updated.
View 4 Replies View RelatedI am using the default styles that came with C3D 2011. How can I change the colors of the corridor "frequency" lines. The lines I am referring to are those that are from the last sub assembly to the daylight line. This is prior to making any section views or surfaces. The colors have to be determined somewhere within the corridor styles I think, but I can't find where.
View 1 Replies View RelatedMy corridor Feature Lines for Daylight Jump across in different areas (see attached PDF)
when I look at it in 3d it looks ok but the plan view the jumped lines show up.
How do i get the feature lines in my corridor to change their style based on the code set style selected?Whats the point of defining featureline styles in the code set style if they don't change in the corridor? They only get used when you first create the corridor?
Is there something I am missing or is this the intended workflow?
I'm having a random issue with the daylight ties lopes not tieing to the EG surface at all stations in the Corridor Section Editor. Some stations daylight fine. In plan view the daylight lines vary left & right as expected but don't display at all in Section Editor.
Some background info:2012 Civil 3D SP1 / 64 bit / WIN7Simple corridor used1 alignmentSame fg profileSame drefd EG surface (set all targets for daylight LT/RT)Only one assembly applied to entire corridor Attached are 2 captions of the issue I'm having which each have a cut & fill occurrence as well as a caption of the entire align. & corridor. I did try deleting corridor & recreating and even recreated a simpler assembly and still have the daylight issue in same areas of corridor.
How or if you can add sample lines to a specified group? I created a group only to realize that there are some specific stations I need. I do not want to re-create the group and re-assign the materials nor reproduce my volume reports. I just want the section plotted on my sheets.
View 3 Replies View RelatedI've started doing my first intersections but I'm stuck with one mistake. I did all daylights and curb returns for intersection.
I have a feeling that it's incorrect targeting here, isn't?
I'm using feature lines created from utilities line work to label utility locations on section views. To avoid selecting each individual section view, I'm using Profile & Section Views, Section views, Project Objects To Multiple Section Views. This works great. Labels are placed on the Sections Views all at once, just requiring a little clean up of label locations. However, there are feature lines for other purposes in the drawing, and these are all labeled at the same time. Any way to select which feature lines will be projected? I've been erasing the extra labels, which is still faster then placing one label at a time per section view.
Win 7 64BIT
C3D 2013
I have a ditch and a road that need to follow separate profiles but be integrated with each other as a single corridor and the ditch's 3:1 slope needs to meet up with the road's 2% slope. Is it possible to have the two subassemblies target each other without having to create a dummy surface or a feature line for targeting to?
View 6 Replies View RelatedI create Curb Return Fillet assembly with shoulder in SAC , but now i have problem with targeting , when i giving two targets it takes only first target and ignores second, could you check attached assembly and drawing ?
View 4 Replies View RelatedI have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies View RelatedCopy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I am having a little trouble with gps coordinates. I am trying to snap to a specific gps coordinate on my layout. I have a "gps block" that spits out the proper coordinates but i am not sure how to move to a specif point. My layout is set up such that when i use my "gps block" on a known point it spits out the northing and easting, however, when i try to actually type in a specif northing and easting, it is no where near the point i am looking for on the layout.
View 6 Replies View RelatedI have been using Corel for over 20 years, and have never needed support. I do most of my work editing nodes within a drawing for creating continuous line patterns that are repeatable.
For years I have simple "nudged" the first and last point of a complex curve to the appropriate position. Now I want to simplify that by entering in the coordinates for the node.
I have tried Object Coordinates, but it appears to do nothing after I change the node location, or radically change my design. There is no documentation for it. I have searched Customize for some sort of input field to add to the toolbar with no luck.
I always have to add the information on the coordinates of the selected note to the Status Bar, so I am surprised that I can't find an option for editing the position.
I am opening a drawing file whose units are already set to "Architectural - Inches".When im retrieving the coordinates of lines present in drawing it is returning in some other format.How do i change this.Or how do i know in what unit system the values are being returned.
View 3 Replies View Related
