AutoCAD Civil 3D :: Targeting Offset Alignment Layout Profile With Corridor Lane Assembly
Jul 19, 2012
For some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
I create Curb Return Fillet assembly with shoulder in SAC , but now i have problem with targeting , when i giving two targets it takes only first target and ignores second, could you check attached assembly and drawing ?
Im using civil 3d UKIE 64bit, having a serious problem with adding a lane widening to an offset alignment. It is a straight alignment approx 200m length, but when i enter the parameters that is asked, at the end it says no solution!
Is there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.
For an intersection, I am trying to create an alignment and profile from the Lane (edge of traveled way) of my main road for the intersection lanes to tie to. I just did this yesterday on this same corridor without any issue, but today it doesn't create the alignment correctly. It doesn't actually follow the feature line that I select. The alignment is in orange and the green line is the lane line. Notice that the alignment isn't following the lane line.
What would cause this? It worked fine doing the exact same thing yesterday, but today it's not.
Infrastructure Design Suite Premium 2014 Civil 3D 2014 x64 Windows 7 64-bit 6GB RAM
I created a surface corridor, called STAGE 1, that I would like to target with a second corridor, STAGE 2. In a new file, I data referenced in STAGE 1 surface. It is showing up as an option for me to use as a target in my STAGE 2 corridor properties. Once I look at my sections it shows there is nothing targeted on that side.
I watched the cul-de-sac placewhere and I seem to missing some functionality shown. Specifically the ability to link a transition lane to an alignment and profile via corridor properties>logical name>no width shown as the placewhere shows?
When creating an alignment from corridor feature (ditch invert level), the created alignment is not following the selected line (see image bellow). The alignment seams to be created from the first point of the feature line to the last point and ignores all the other points. The vertical alignment created at the same time seams to be correct.
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
I have created a widening then created an 11-foot offset from the widening for some reason I cannot create a 22-foot offset or an d11-foot from the first offset. I can go as high as 22.5 but no more. There are no curves in the alignment only linear tapers. why I cant get to 22-feet?
Civil 3D 2012 & 2013 HP Z210 Workstation Intel Xeon CPU E31240 @ 3.30 Hz 12 GB Ram 64 Bit Win7 OS
I want to show the alignment staining #'s but I also have a corridor and sample lines running through the stationing that I want to see. I do not wish to drag every alignment label and then have the leader showing.
We have been playing with offset alignments, and the tool appears very useful, especially in regards to laying out subdivision streets with curb, sidewalks, row, etc. In order to shortcut the process, I am hoping to develop a routine that will gather offset data for each type of offset, and then apply the appropriate styles, label sets, naming convention, etc.
We started going down the path of using Lisp or a recorded macro, but it quickly became obvious (through trial and error and some quick "googling") that another approach may be more suitable. I have attached a screenshot of an example of what we would like to automate.
I want use my corridor where I need it and not use one in certain areas. For a proposed dike. Some places doesn't need to be replace. So I need a way to use my section on the alignment. where I can find that option?
My alignment runs on the road center line and ends at the center of the cal-de-sac bubble. My corridor runs to the middle of the cal-de-sac. I need to shorten the corridor to end where the constant road width ends and the bulb of the cal-de-sac begins. I can shorten the Corridor on the alignment or do I need to create a new alignment to the desired length?
I have the centerline of a berm constructed using a 3D polyline. I want to use this centerline as the Alignment that I need from which to create a Corridor. When I try to create an Alignment from objects, I can only use a 2D polyline, not 3D. The berm has a slope to it and I need to have the assembly follow that slope as I create the Corridor. Do I need to create the Alignment in 2D and then edit the points for elevation?
I am trying for last hour but cannot make this work. I have attached screen shot of a dynamic label with some text. The problem is as you add degree symbols and inch (") symbols and paratheses to the text, the leader starts to intersect the station value. I want to move the leader a little below the sta. value so the station vallue is readable. When I move the leader the text moves with it. I tried everything in edit label text option but cannot seem to fix it.
I would like to set up an alignment station offset label that when in the dragged state, offsets the arrowhead from the actual insertion point on the alignment in any direction and distance I specify. I am preparing some plans for a water line. I am working at a 1"=200' scale so all of the blocks representing fittings are scaled up so they are legible.
In some instances, the fittings are right next to each other. If I place an alignment station offset label at the actual station and drag it away from the alignment, the arrowhead is pointing to the station but not the fitting. Is there a way to offset the arrowhead of a C3D label in dragged state other than in the direction of the leader?
This is with Civil 3D 2013. I am able to create a pline by offsetting an alignment using any drawing on any other workstation in our office, but on my machine I get an error: "1 object(s) were filtered out." when I try to select the alignment.
This leads me to searching for some system variable or something that is different on my machine.
How can I have an offset alignment that I created be the current label so when I start to pick offset of my current alignment I do not want to have to go back and change the label style to my own label style.