How can I have an offset alignment that I created be the current label so when I start to pick offset of my current alignment I do not want to have to go back and change the label style to my own label style.
View 1 Replies
Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created? For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y? It seems like this should be pretty easy, I must be missing something obvious.
View 2 Replies View RelatedI am trying for last hour but cannot make this work. I have attached screen shot of a dynamic label with some text. The problem is as you add degree symbols and inch (") symbols and paratheses to the text, the leader starts to intersect the station value. I want to move the leader a little below the sta. value so the station vallue is readable. When I move the leader the text moves with it. I tried everything in edit label text option but cannot seem to fix it.
[URL]
I would like to set up an alignment station offset label that when in the dragged state, offsets the arrowhead from the actual insertion point on the alignment in any direction and distance I specify. I am preparing some plans for a water line. I am working at a 1"=200' scale so all of the blocks representing fittings are scaled up so they are legible.
In some instances, the fittings are right next to each other. If I place an alignment station offset label at the actual station and drag it away from the alignment, the arrowhead is pointing to the station but not the fitting. Is there a way to offset the arrowhead of a C3D label in dragged state other than in the direction of the leader?
I am labeling station and offsets from my alignment for curb returns and such and for some reason if the offset point is directly perpendicular from an alignment PC or PT the label can't find the alignment information. It's like there is a blind spot.
View 4 Replies View Relatedhow do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
View 4 Replies View RelatedMy dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies View RelatedC3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
I am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
Is there a way to set the superelevation data to offsets alignments in Civil 3d 2014.
View 2 Replies View RelatedI have created a widening then created an 11-foot offset from the widening for some reason I cannot create a 22-foot offset or an d11-foot from the first offset. I can go as high as 22.5 but no more. There are no curves in the alignment only linear tapers. why I cant get to 22-feet?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
Can I offset my alignment labels?
I want to show the alignment staining #'s but I also have a corridor and sample lines running through the stationing that I want to see. I do not wish to drag every alignment label and then have the leader showing.
We have been playing with offset alignments, and the tool appears very useful, especially in regards to laying out subdivision streets with curb, sidewalks, row, etc. In order to shortcut the process, I am hoping to develop a routine that will gather offset data for each type of offset, and then apply the appropriate styles, label sets, naming convention, etc.
We started going down the path of using Lisp or a recorded macro, but it quickly became obvious (through trial and error and some quick "googling") that another approach may be more suitable. I have attached a screenshot of an example of what we would like to automate.
Im using civil 3d UKIE 64bit, having a serious problem with adding a lane widening to an offset alignment. It is a straight alignment approx 200m length, but when i enter the parameters that is asked, at the end it says no solution!
View 2 Replies View RelatedWhen I am in the file with the labels everything is the proper size. When I reference this file into my sheet file everything becomes tiny. Any legitimate solution?
View 9 Replies View Relatedi have a main control line and a offset alignment control line which have different profiles and superelevation. i know the offset alignment can apply profile but can the superelevation be different?
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
This is with Civil 3D 2013. I am able to create a pline by offsetting an alignment using any drawing on any other workstation in our office, but on my machine I get an error: "1 object(s) were filtered out." when I try to select the alignment.
This leads me to searching for some system variable or something that is different on my machine.
I am trying to find a way to offset points along an alignment showing station, offset and description. This is for a plan and profile sheet see attached example clouded in red.
View 2 Replies View RelatedIs there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.
View 7 Replies View RelatedNew to civil 3d...I have a series of bore locations along an alignment that I need the station offset and distance. I tried POINT -> ALIGNMENT: STATION/OFFSET, and that prompts me to tell where i want the offsets to go. I want to be able to pick the center of each bore and have civil 3d tell me that information. What command do I use?
View 4 Replies View RelatedI use the same label style for multiple objects (surfaces) with different layers (i.e. Concrete, Pavement, etc.) I have the label style set to Layer 0, to take on the layer properties I want the label on. When I insert a label, it defaults to Layer 0, then I have to change it's layer. Is there a way to insert a label on the current layer?
View 4 Replies View RelatedI am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.
View 3 Replies View RelatedI need to show offset distances from alignment centerline. Is there a way to add this to the point label?
View 9 Replies View RelatedI need to add a ONE label to an alignment. I would like to do it via Vlisp or C#.
View 4 Replies View RelatedI created a new alignment based on a survey topo. The first half of the alignment shows the sections/chainages but the second half does not. My alignment should be line, curve, line, line, curve, line, line, curve, line but when I check the design editor, it only shows the 5 elements. When I check the sub entity it appears some are not assigned numbers which have generated a warning symbol.
Why are the last 4 entities not recognized?
Typically when we have station offset for a storm structure shown to center of structure. How do you handle station offset with a storm structure label for say back of curb.
View 3 Replies View RelatedI am working on Street Improvement Plan using Civil 3D 2012. I have my centerline stationing set for major (100') and minor (50'). My street plan is kind of busy with a several call-out/label, leader etc. I want to set my my station for both major and minor with with decimal to read as 1+00 or 1+ 50 as opposed to 1+00.00... How to get rid of the decimal points.
View 6 Replies View RelatedCan I change the alignment that is associated with an alignment label (station offset etc)?
View 4 Replies View RelatedI'm trying to use the _Wipeout_Circle block that ships with the straight-out-of-the-box NCS template (Civil 3D 2013 and Civil 3D 2014) to create a PI marker point in which the alignment is wiped out at the PI points. As you can see, the block itself works fine, but once used as a marker point it doesn't:
Here are the settings I'm using (again, this can be recreated straight from the NCS template):
I am currently trying to design a roadway with a reverse curve in it. I am having trouble getting my corridor to model my assembly correctly as it is showing the roadway as the generic assembly and is not adding the superelevation that is shown on my alignment. I have done the following:
1) created an alignment with superelevation wizard - superelevation diagram shows up correctly
2) Created a profile for this alignment
2) created an assembly (Road layer is LaneSuperelevationAOR) in which the right lane is set to use SE on the right outside lane and the left lane is set to use SE on the left outside lane
3) Created a corridor with the assembly and set the width targets to the offset alignments (I.e. the lines that are the edge of pavement)
The corridor does not show the superelevation values based off of the alignments superelevation that it has calculated. I did get the supers to show when i tied the Future EOP to the existing surface, however i do not want it to tie in, I want it to just show the values that were calculated.
Is there a way to get this to show without referencing an additional profile? Also, on my first curve i want to keep the right side at a -2% slope and raise the left side to 2% slope (RC). Is there a way to limit the calcuations to only use a reverse curve?
For some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
View 9 Replies View Related
