AutoCAD Civil 3D :: Station / Offset Label FIX
May 29, 2013When I am in the file with the labels everything is the proper size. When I reference this file into my sheet file everything becomes tiny. Any legitimate solution?
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Create Station-offset Label Style That Will Drop Trailing Zeros In Offset?
May 14, 2012I am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
AutoCAD Civil 3D :: Station Label Offset And Distance
Nov 5, 2012New to civil 3d...I have a series of bore locations along an alignment that I need the station offset and distance. I tried POINT -> ALIGNMENT: STATION/OFFSET, and that prompts me to tell where i want the offsets to go. I want to be able to pick the center of each bore and have civil 3d tell me that information. What command do I use?
View 4 Replies View RelatedAutoCAD Civil 3D :: Alignment Station Offset Label
May 19, 2012I am trying for last hour but cannot make this work. I have attached screen shot of a dynamic label with some text. The problem is as you add degree symbols and inch (") symbols and paratheses to the text, the leader starts to intersect the station value. I want to move the leader a little below the sta. value so the station vallue is readable. When I move the leader the text moves with it. I tried everything in edit label text option but cannot seem to fix it.
[URL]
AutoCAD Civil 3D :: Set Up Alignment Station Offset Label
Oct 7, 2013I would like to set up an alignment station offset label that when in the dragged state, offsets the arrowhead from the actual insertion point on the alignment in any direction and distance I specify. I am preparing some plans for a water line. I am working at a 1"=200' scale so all of the blocks representing fittings are scaled up so they are legible.
In some instances, the fittings are right next to each other. If I place an alignment station offset label at the actual station and drag it away from the alignment, the arrowhead is pointing to the station but not the fitting. Is there a way to offset the arrowhead of a C3D label in dragged state other than in the direction of the leader?
AutoCAD Civil 3D :: How To Handle Station Offset With Storm Structure Label
May 18, 2012Typically when we have station offset for a storm structure shown to center of structure. How do you handle station offset with a storm structure label for say back of curb.
View 3 Replies View RelatedAutoCAD Civil 3D :: Alignment Station Offset Label Blind Spot
Mar 26, 2013I am labeling station and offsets from my alignment for curb returns and such and for some reason if the offset point is directly perpendicular from an alignment PC or PT the label can't find the alignment information. It's like there is a blind spot.
View 4 Replies View RelatedAutoCAD Civil 3D :: Change Alignment Station Offset Label Default Layer?
Oct 29, 2012how do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
View 4 Replies View RelatedAutoCAD Civil 3D :: Alignment Station / Offset Label Style - Dragged State Leader Does Not Display Properly
Dec 27, 2012My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies View RelatedAutoCAD Civil 3D :: Add Leader Part To Leader Created When Drag Station Offset Label
Mar 6, 2012C3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
AutoCAD Civil 3D :: Add Station And Offset To A Point
Jan 7, 2013I currently have a drawing with a road alignment and stationing. Is there a way to automatically station and offset a point that is not on the alignment line?
For instance, our alignment line is the centerline of the road. I need a station and offset of the new right of way line points at different places in the drawing. I want to use the alignment stationing to have it automatically create the station and offset at the point I choose.
AutoCAD Civil 3D :: Station Offset Labels Of Blocks
Apr 25, 2012how to set-up a style what i want to do is label the station and offset of the insertion point of a block by selecting that block and placing the name of the block at the end of the label. as such it would read sta: 14+58.25 - L12.50' P Pole
View 3 Replies View RelatedAutoCAD Civil 3D :: Station Offset Report By Point Group?
Feb 2, 2012I am trying to use the Station Offset to Points report from the Reports manager. Currently, as far as I ca see, there is no way to select a group of points to include, either by point group or selection from the drawing. There is only "Select All' or "Deselect All". I want a report that will show the station, offset, raw or full description and elevation of a group of points related to an alignment/street. I don't see that option.
View 2 Replies View RelatedAutoCAD Civil 3D :: Station Offset To Points Report Not Working?
Oct 31, 2011A co-worker asked if I could create a report that listed the station and offset values for selected points & alignment. After selecting "execute" for the Station Offset to Points report, the file gets hung up before I can select the points and alignment I want.
I've tried xml-ing out the desired points & alignment into another file and running the report from..
All other reports under Alignment and Points work fine (drawing does not have other C3D objects).
I'm using C3D 2011 version 3.
AutoCAD Civil 3D :: Station Offset To Points Report Not Sorted?
Aug 10, 2012Civil 3D 2013
Toolspace > Toolbox > Reports Manager > Points > Station Offset to Points
why point number 9 comes after 1 instead of 8?
Clicking on the column headers to sort does not work.
Found another report of this, but in an earlier version of C3D.
[URL]
AutoCAD Civil 3D :: Offset Points Along Alignment With Station And Description
Apr 9, 2012I am trying to find a way to offset points along an alignment showing station, offset and description. This is for a plan and profile sheet see attached example clouded in red.
View 2 Replies View RelatedAutoCAD Civil 3D :: Reports Station Offset To Points Report
Feb 21, 2012When I Create a Station offset to points report, the points are out of order and it does not display all of the points.
View 2 Replies View RelatedAutoCAD Civil 3D :: Alignment Station Offset In Profile View
Apr 27, 2013Is there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.
View 7 Replies View RelatedAutoCAD Civil 3D :: Can't Find Inquiry Station Offset Objects
Feb 1, 2011I'm still bouncing back and forth from 2008 LDD and 2010 3D.
I can't seem to find inquiry station offset objects or something like inverse to line.
Do have to create alignments for these simple calculations.
AutoCAD Civil 3D :: Editing Multiple Alignment Station Offset Labels
Mar 19, 2013I am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.
View 3 Replies View RelatedAutoCAD Civil 3D :: Station Label Update
Sep 5, 2013I have a problem with some station labels I have, when I open the drawing(s) the labels display ??? instead of the station. After I manually sync the alignment in prospector, the drawing switches to the model tab with the ? now showing correctly.
View 2 Replies View RelatedAutoCAD Civil 3D :: Multiple Station In One Label
Oct 30, 2012Im trying to make a label that will call out pipe replacement in reference to an alignment. I know how to call out from multiple alignments, but I need multiple stations from the same alignment, such as sta xxx to sta xxx.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
AutoCAD Civil 3D :: How To Get Station Label Increment
Aug 13, 2012I have an alignment that starts at station 1+00 and runs through 20+00.
By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.
As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.
AutoCAD Civil 3D :: Modify Leader For Station And Offset Labels To Underline Top Line Of Text
Dec 10, 2012How do I modify the leader for station and offset labels to underline the top line of text?
View 3 Replies View RelatedAutoCAD Civil 3D :: Possible To Add Prefix To Alignment Station Label
Jun 22, 2012Is it possible to add a prefix to an alignment station label (ex. A 100+00.00 or B 100+00.00) in Civil 3D 2010 or later?
View 5 Replies View RelatedAutoCAD Civil 3D :: Label Station At Specific Elevation
Apr 15, 2013Is there a way to label or list a station at a specific elevation? I know how to list and label an elevation at a given station but I need to know where a specific (given) elevation is located on an alignment or profile. I don't care if this is listed or labeled on the alignment or profile, I just need to be able to get a station at a given elevation.
View 5 Replies View RelatedAutoCAD Civil 3D :: Change Of Station Label Format?
Nov 16, 2012I would like to change the station label format from 00+000.000 to 00,0+00.000
To move the + is easy, but how can I add the ,?
This type of station label is the standard by the Deutsche Bahn, so it's not that far-fetched.
Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013
AutoCAD Civil 3D :: Change Station Label Format From 20+00.00 To 20+00?
Oct 10, 2013How do you Change Station Label Format from 20+00.00 to 20+00 ??
View 3 Replies View RelatedAutoCAD Civil 3D :: Station Equation Label Between Two Intersecting Alignments
Jul 26, 2012I am looking to create a alignment label style within 2013 that allows me to create a label that looks somewhat like the following:
alignment 1
sta=xx+xx
alignment 2
sta=xx+xx
The label would be used at the intersection of 2 separate alignments.
AutoCAD Civil 3D :: Label Superimposed Profile With Its Station Data?
May 13, 2013I can label the superimposed profile but c3d uses the stations of main profile of profile view.
Thinking on the future.... c3D can have the ability of use superelevation values to calculate the right values of superimposed profiles ?
AutoCAD Civil 3D :: Plan Production / Station Label Visibility
Apr 19, 2012I've read or seen a video on this before, but don't recall fix. As you can see in the attached image that half of my station label is missing, is there a fix for this. I think I recall reading you need to include a data band strictly for positioning of profile view.
View 4 Replies View Related
