AutoCAD Civil 3D :: Possible To Add Prefix To Alignment Station Label

Jun 22, 2012

Is it possible to add a prefix to an alignment station label (ex. A 100+00.00 or B 100+00.00) in Civil 3D 2010 or later?

View 5 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Alignment Station Offset Label

May 19, 2012

I am trying for last hour but cannot make this work. I have attached screen shot of a dynamic label with some text. The problem is as you add degree symbols and inch (") symbols and paratheses to the text, the leader starts to intersect the station value. I want to move the leader a little below the sta. value so the station vallue is readable. When I move the leader the text moves with it. I tried everything in edit label text option but cannot seem to fix it.

[URL]

View 5 Replies View Related

AutoCAD Civil 3D :: Set Up Alignment Station Offset Label

Oct 7, 2013

I would like to set up an alignment station offset label that when in the dragged state, offsets the arrowhead from the actual insertion point on the alignment in any direction and distance I specify. I am preparing some plans for a water line. I am working at a 1"=200' scale so all of the blocks representing fittings are scaled up so they are legible.

In some instances, the fittings are right next to each other. If I place an alignment station offset label at the actual station and drag it away from the alignment, the arrowhead is pointing to the station but not the fitting. Is there a way to offset the arrowhead of a C3D label in dragged state other than in the direction of the leader?

View 1 Replies View Related

AutoCAD Civil 3D :: Label Two Station On One Alignment In Construction Note?

Apr 11, 2013

Looking for a way to label two station on one alignment in a construction note. 

Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Station Offset Label Blind Spot

Mar 26, 2013

I am labeling station and offsets from my alignment for curb returns and such and for some reason if the offset point is directly perpendicular from an alignment PC or PT the label can't find the alignment information. It's like there is a blind spot.

View 4 Replies View Related

AutoCAD Civil 3D :: Alignment PI Label With Lat Long / Station And Delta Angle

Feb 27, 2013

We are trying to label the intersection points on an alignment with the following info:

Sta:
Delta Angle
LAT
LONG

We can make it work with a Northing and Easting, but there is no option for a LAT LONG under the tangent intersection labels.  I tried to make an expression that would format a Northing as a LAT but it just gave me jibberish.

I was able to do it but adding a point at each PI and making a point reference text, but you then have to select a different point for each label....  which works but it is still a multi step process.

View 9 Replies View Related

AutoCAD Civil 3D :: Changing Alignment Label Sets Starting Station

Sep 19, 2011

Is it possible to modify a label set to a new starting station, e.g., instead of the alignment starting at 0, change it to start at 100?

View 9 Replies View Related

AutoCAD Civil 3D :: Change Alignment Station Offset Label Default Layer?

Oct 29, 2012

how do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.

View 4 Replies View Related

AutoCAD Civil 3D :: Alignment Station / Offset Label Style - Dragged State Leader Does Not Display Properly

Dec 27, 2012

My dragged state leader does not display properly.  The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment Begin Station Inherited From Another Alignment

Aug 8, 2012

Can I inherit the station from one alignment as the begin station for another alignment?

For example. Alignment 1 is 1000 ft long and starts at sta 0+00.

At sta 8+01, Alignment 2 begins and goes off in another direction.

I manually enter 8+01 for begin station Alignment 2. Life is good. Still in the design stage, and customer needs to modify Alignment 1 to avoid something. Now Alignment 2 intersects Alignment 1 at sta 8+15, but same N/E coordinates.

I manually enter 8+15 for begin station Alignment 2.

It would be better if Alignment 2 could inherit the begin station based on the new stationing from Alignment 1.

View 7 Replies View Related

AutoCAD Civil 3D :: Change Alignment Label Style Set After Alignment Has Been Created?

Jul 18, 2013

Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created?  For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y?  It seems like this should be pretty easy, I must be missing something obvious. 

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Station Modification

Nov 21, 2012

When an alignment needs to have stationing modified, what is the best process for this when a proposed grade line and corridor have been established?  I know the proposed grade line can be edited via edit profile geometry>profile grid view. 

But what from I have found each station has to be modified individually, which is cumbersome.  I would hope to be able to modify the proposed grade line by changing only the beginning station and the rest would update, similar to the alignment.

C3D 2011, (latest updates)
Win 7 Pro, 64-bit
16 GB RAM 

View 8 Replies View Related

AutoCAD Civil 3D :: Zoom To A Station On Alignment?

Jan 15, 2013

Like entering a station and going there?I've used the 'SO with Zoom C. That is not simple.12+ miles of a single road alignment with 3 equation stations makes for a LOT of panning.

View 4 Replies View Related

AutoCAD Civil 3D :: Re-Station Alignment After Editing?

Jan 13, 2013

After editing an alignment in my drawing the stationing did not update to the new edited alignment. I tried selecting the alignment and in alignment properties changing the end stationing, but I get the error "Either outside alignment limits or within gap created by a station equation". The stationing stops at my first edit point 66+24 when the total length of edited alignment is 103+15. Is there a way to re-station alignment.

View 3 Replies View Related

AutoCAD Civil 3D :: Points On Alignment At Station With Description?

Apr 24, 2013

i need to put points on an alignment at each station. i've figured that part out. what i want is the station label to be the point description. i don't see a way to do this without editing each point which is way too time consuming.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment PI Station Report Settings?

Feb 1, 2012

I am trying to export an Alignment PI Station Report. I've set all the settings I can find to round coordinates to 4 decimal places, Distance to 2 decimal places, and Direction to the nearest second (DMS). When I execute the PI Station Report, the Distance is 3 decimal places and the Direction is to the nearest 100th of a second. how to get these to the correct decimal place? I managed to change them to the correct decimal place for a Station & Curve Report, but not for the PI Station Report. Also, for the Northing/Easting coordinates, I want to remove the commas (for example, a Northing of 3,058,715.3774' should read 3058715.3774').

View 4 Replies View Related

AutoCAD Civil 3D :: How To Define The Station Control From The End Of Alignment

May 23, 2012

if it's possible to define the stationing of the alignment from the end of the alignment till the start.

I have a special situation where the end station is fixed in one point (ex. km 3+125,00) and till there I can change the alignment.

I want to be all the time the end in one station value.

View 7 Replies View Related

AutoCAD Civil 3D :: Move Station On Existing Alignment?

Aug 23, 2012

Is there a way to move the station on an existing alignment?  For example, I have an alignment created and want to move station 10+00 so it represents a different point on my alignemnt.

View 1 Replies View Related

AutoCAD Civil 3D :: Station Label Update

Sep 5, 2013

I have a problem with some station labels I have, when I open the drawing(s) the labels display ??? instead of the station. After I manually sync the alignment in prospector, the drawing switches to the model tab with the ? now showing correctly.

View 2 Replies View Related

AutoCAD Civil 3D :: Multiple Station In One Label

Oct 30, 2012

Im trying to make a label that will call out pipe replacement in reference to an alignment. I know how to call out from multiple alignments, but I need multiple stations from the same alignment, such as sta xxx to sta xxx.

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 8 Replies View Related

AutoCAD Civil 3D :: How To Get Station Label Increment

Aug 13, 2012

I have an alignment that starts at station 1+00 and runs through 20+00.

By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.

As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.

View 5 Replies View Related

AutoCAD Civil 3D :: Station / Offset Label FIX

May 29, 2013

When I am in the file with the labels everything is the proper size.  When I reference this file into my sheet file everything becomes tiny. Any legitimate solution?

View 9 Replies View Related

AutoCAD Civil 3D :: Reset Alignment (x Backward From Start Station)

Aug 31, 2012

I am working on road improvements, the City my client want to extend the improvement longer form the original scope of work. I am already completed the alignment and road profile centerline and the production plan is 100% completed.

What I need to do is to change and  extend the alignment 750 feet backward from the original station (10+00). If I could explain correctly, I want to start the station @ 7+50 (backward from 10+00) and no changes on forward stationing.

What is the best way without doing re-creating alignment.

View 3 Replies View Related

AutoCAD Civil 3D :: Alignment Report That Includes Both Station And PI Information

Mar 19, 2012

I have a 2 mile alignment of a railroad loop track and I am looking to generate a report that include both information at 50' increments and the curve data, i.e. PI, PT, so I can generate a staking report for the surveyors. I noticed that there are pre-canned reports that handle one or the other but not both.

View 2 Replies View Related

AutoCAD Civil 3D :: Change Default Beginning Alignment Station?

Jun 4, 2007

where to change the default beginning station from 0+00 to 1+00 in my civil 3d profile template (dwt), so that the beginning station is always 1+00, unless the user changes it.

View 3 Replies View Related

AutoCAD Civil 3D :: Offset Points Along Alignment With Station And Description

Apr 9, 2012

I am trying to find a way to offset points along an alignment showing station, offset and description. This is for a plan and profile sheet see attached example clouded in red.

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Station Offset In Profile View

Apr 27, 2013

Is there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.

View 7 Replies View Related

AutoCAD Civil 3D :: Station Label Offset And Distance

Nov 5, 2012

New to civil 3d...I have a series of bore locations along an alignment that I need the station offset and distance. I tried POINT -> ALIGNMENT: STATION/OFFSET, and that prompts me to tell where i want the offsets to go. I want to be able to pick the center of each bore and have civil 3d tell me that information. What command do I use?

View 4 Replies View Related

AutoCAD Civil 3D :: Label Station At Specific Elevation

Apr 15, 2013

Is there a way to label or list a station at a specific elevation? I know how to list and label an elevation at a given station but I need to know where a specific (given) elevation is located on an alignment or profile. I don't care if this is listed or labeled on the alignment or profile, I just need to be able to get a station at a given elevation.

View 5 Replies View Related

AutoCAD Civil 3D :: Change Of Station Label Format?

Nov 16, 2012

I would like to change the station label format from 00+000.000 to 00,0+00.000

To move the + is easy, but how can I add the ,?

This type of station label is the standard by the Deutsche Bahn, so it's not that far-fetched.

Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013

View 3 Replies View Related

AutoCAD Civil 3D :: Change Station Label Format From 20+00.00 To 20+00?

Oct 10, 2013

How do you  Change Station Label Format from 20+00.00 to 20+00 ??

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved