This is with Civil 3D 2013. I am able to create a pline by offsetting an alignment using any drawing on any other workstation in our office, but on my machine I get an error: "1 object(s) were filtered out." when I try to select the alignment.
This leads me to searching for some system variable or something that is different on my machine.
How to convert pline to Alignment C3D 2014
View 1 Replies View RelatedI am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
Is there a way to set the superelevation data to offsets alignments in Civil 3d 2014.
View 2 Replies View RelatedI have created a widening then created an 11-foot offset from the widening for some reason I cannot create a 22-foot offset or an d11-foot from the first offset. I can go as high as 22.5 but no more. There are no curves in the alignment only linear tapers. why I cant get to 22-feet?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
Can I offset my alignment labels?
I want to show the alignment staining #'s but I also have a corridor and sample lines running through the stationing that I want to see. I do not wish to drag every alignment label and then have the leader showing.
We have been playing with offset alignments, and the tool appears very useful, especially in regards to laying out subdivision streets with curb, sidewalks, row, etc. In order to shortcut the process, I am hoping to develop a routine that will gather offset data for each type of offset, and then apply the appropriate styles, label sets, naming convention, etc.
We started going down the path of using Lisp or a recorded macro, but it quickly became obvious (through trial and error and some quick "googling") that another approach may be more suitable. I have attached a screenshot of an example of what we would like to automate.
I have created a horizontal alignment with labels and would like to label the station at a drive entrance. Do I insert at that point? My label then says pi: x+xx.xx. How do I have it just label the station?
View 6 Replies View RelatedHow to specify the value of radius (R) WHILE drawing the horizontal alignment?
I’m wondering if there is a way to specify the value of radius (R) while drawing the horizontal alignment.
For example, the value of deflection angle can provided while WHILE drawing the horizontal alignment by typing ‘dd (attached). Is there a way to specify the value of radius (R) while drawing the horizontal alignment?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to weed the PI lables of an alignment. so that no all vertices are labeled, short of the ctrl-select method?
C3D12-13
Win7x64 6gb
i thought we can grip edit a horizontal alignment? - when does it not work or not applicable because when I tried to change part of my alignment it did not work?
View 3 Replies View RelatedI am trying for last hour but cannot make this work. I have attached screen shot of a dynamic label with some text. The problem is as you add degree symbols and inch (") symbols and paratheses to the text, the leader starts to intersect the station value. I want to move the leader a little below the sta. value so the station vallue is readable. When I move the leader the text moves with it. I tried everything in edit label text option but cannot seem to fix it.
[URL]
Im using civil 3d UKIE 64bit, having a serious problem with adding a lane widening to an offset alignment. It is a straight alignment approx 200m length, but when i enter the parameters that is asked, at the end it says no solution!
View 2 Replies View RelatedI would like to set up an alignment station offset label that when in the dragged state, offsets the arrowhead from the actual insertion point on the alignment in any direction and distance I specify. I am preparing some plans for a water line. I am working at a 1"=200' scale so all of the blocks representing fittings are scaled up so they are legible.
In some instances, the fittings are right next to each other. If I place an alignment station offset label at the actual station and drag it away from the alignment, the arrowhead is pointing to the station but not the fitting. Is there a way to offset the arrowhead of a C3D label in dragged state other than in the direction of the leader?
How to specify the deflection angle while plotting the horizontal alignment? I’m wondering if there is a way to provide the deflection angle while plotting the horizontal alignment (based on the tangent-tangent with curve method).
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, RevitWindows 7 (Ultimate 64 bits),Firefox 20.0,Kaspersky 2013.
I am trying to revise my horizontal alignment by dragging it to locations. It is not adjusting the way i want around curves, it keeps moving one end when i change the other.I am working in civil 3d 2010, is there a way to change the constraints or revise it correctly?
View 4 Replies View Related(Again): Plotting points at stations of horizontal alignment,
I wanted to plot points at the stations of horizontal alignment to be then able to capture their XYZ and thus can be stored on the GPS devise for setting out on the field.
The points are not plotted (see the attached screenshots
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Land desktop anchored the alignment stationing at the "+" sign directly on the alignment.
Is there a way to do the same in C3D 2010 without adjusting the x,y locations?
Maybe my workflow is flawed but I thought I had done this before:
Drawing A has alignments and profile views
Drawing B has DS of alignments from A
User A is working on annotating profile views in drawing A. User B is working on design profiles in Drawing B, adds DS of design profile and everything looks correct in the DS node. But when we try to DS in the design profiles we get the message in the title.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
i have a main control line and a offset alignment control line which have different profiles and superelevation. i know the offset alignment can apply profile but can the superelevation be different?
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I am trying to find a way to offset points along an alignment showing station, offset and description. This is for a plan and profile sheet see attached example clouded in red.
View 2 Replies View RelatedIs there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.
View 7 Replies View RelatedHow can I have an offset alignment that I created be the current label so when I start to pick offset of my current alignment I do not want to have to go back and change the label style to my own label style.
View 1 Replies View RelatedSome authorities (in Australia) require profile views to include diagrammatic representation of the curves, transitions and slopes. For example refer to the image below, which are from NSW Rail Corp guidelines. Similar information is required by some Council/Authorities for road projects.
View 1 Replies View RelatedHow the deflection angle can be shown in the horizontal alignment curve? I’m wondering if there is a way to automatically show the deflection angle of the horizontal alignment curve (attached)?
View 3 Replies View RelatedI am labeling station and offsets from my alignment for curb returns and such and for some reason if the offset point is directly perpendicular from an alignment PC or PT the label can't find the alignment information. It's like there is a blind spot.
View 4 Replies View RelatedI am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.
View 3 Replies View Relatedhow do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
View 4 Replies View RelatedAngle-distance method to stake out the horizontal alignment by total station,Assuming that the total station with reflector is the tool that it is intended to lay out the circular curve after being designed then the only way to do so is to construct a table that contains angle-distance values.
I’m wondering if the C3D can provide this table (attached)
For some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
View 9 Replies View RelatedBasically I have 3dpolylines and some Splines. I would like to create a road file that uses the geometry of these objects to create a single line/crest of road file.
View 5 Replies View Related