AutoCAD Civil 3D :: Road Alignment Label

Feb 1, 2012

I am working on Street Improvement Plan using Civil 3D 2012. I have my centerline stationing set for major (100') and minor (50'). My street plan is kind of busy with a several call-out/label, leader etc. I want to set my my station for both major and minor with with decimal to read as 1+00 or 1+ 50 as opposed to 1+00.00... How to get rid of the decimal points.

View 6 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Change Alignment Label Style Set After Alignment Has Been Created?

Jul 18, 2013

Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created?  For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y?  It seems like this should be pretty easy, I must be missing something obvious. 

View 2 Replies View Related

AutoCAD Civil 3D :: Label Style - Design Road CL Profile

Apr 9, 2010

how to create a label style for design center of road (simple tangent) in profile that will work between multiple profile views. I've used the 'Create Multiple Views' profile view wizard. I use a horizontal dimension style label for CL road (looks just like an autocad linear dimension). I'd like the label work across separate views i.e. stop at view end, pick back up at view start.

The label I currently use is simply a line component from tangent start dimension to tangent end dimension and the text component is anchored to the line midpoint. Label looks as intended for normal use. For some reason the line drops as if looking for the actual pvi at the right side when i use multiple views.

View 3 Replies View Related

AutoCAD Civil 3D :: Road Intersection Label In Profile View

Apr 10, 2012

What can I do to show intersection information in a profile label?I mean, supose I have two roads (A and B)... what should I do to show in the road A vertical profile the name and the station of road B in the properly position of this A profile? URL....

View 4 Replies View Related

AutoCAD Civil 3D :: Structure Label Reference Road Centerline Stationing?

Mar 13, 2013

I have a road with storm drain and sanitary sewer. There are three alignments, one for the road centerline, one for the sanitary sewer and one for the storm drain. I would like to label the structures with the stationing from the alignment it's on but I would also like the label to include the road centerline station perpendicular to the structure.

Something like this:

SS-MH #4

Sta. 10+00

=Road Sta. xx+xx

View 2 Replies View Related

AutoCAD Civil 3D :: Add Label To Alignment

Nov 14, 2012

I need to add a ONE label to an alignment. I would like to do it via Vlisp or C#.

View 4 Replies View Related

AutoCAD Civil 3D :: Change Alignment Associated With A Label

Oct 18, 2008

Can I change the alignment that is associated with an alignment label (station offset etc)?

View 4 Replies View Related

AutoCAD Civil 3D :: Wipeout In Alignment PI Label

Jan 7, 2014

I'm trying to use the _Wipeout_Circle block that ships with the straight-out-of-the-box NCS template (Civil 3D 2013 and Civil 3D 2014) to create a PI marker point in which the alignment is wiped out at the PI points.  As you can see, the block itself works fine, but once used as a marker point it doesn't:

Here are the settings I'm using (again, this can be recreated straight from the NCS template):

View 4 Replies View Related

AutoCAD Civil 3D :: Alignment And Elevation Label Combination

May 23, 2013

I need a label style that not only labels the major stationing of an alignment, but also displays the corridor surface elevation beneath it.

                                              10+000

                                                   |

                                              22.10m

Something similar to above.

I can add reference text for surface elevation to the alignment label, but all I get is the ???, no surface value.

What am I missing?

View 5 Replies View Related

AutoCAD Civil 3D :: Possible To Add Prefix To Alignment Station Label

Jun 22, 2012

Is it possible to add a prefix to an alignment station label (ex. A 100+00.00 or B 100+00.00) in Civil 3D 2010 or later?

View 5 Replies View Related

AutoCAD Civil 3D :: Alignment Intersection Label Command

Apr 12, 2012

How to label the intersection of the alignments for 3D 2012. This command will label the station equation between alignments automatically.

View 1 Replies View Related

AutoCAD Civil 3D :: Profile Elevation In Alignment Label

Sep 25, 2012

I need to know how to display a proposed profile elevation in the major station alignment label, I mean, for example, I want to read in the label "0+000, 494.444". I've already edited my major station label style adding a (profile type) Reference text, and it only displays "?". I suppose I need to associate it with the correct profile, but I've not figured out how to. I show you how the label looks in the attached image.

View 8 Replies View Related

AutoCAD Civil 3D :: Turn Off End Alignment Label In Plan?

Jun 27, 2012

I am working in C3D 2011. The end station on my alignment is 163+02. The last major station label is 163+00. The label text overlap. I want to turn off the end label of 163+02. The end station is not checked in my Alignment Style or in the Geometry Points style. I am assuming there is a command in the Settings/Alignment/Commands that is overriding the changes I have made in individual styles. I have found some post concerning this from 2004 but they do not seem to be applicable in 2011.

View 5 Replies View Related

AutoCAD Civil 3D :: Setting Alignment Label Elevations

Mar 27, 2012

Way to snap or drape the alignment (station) labels over a surface or bring them to the elevation of a selected surface.  I'd like to know how to do this if there is a way, so when I look at surfaces in object viewer I can get an idea of where problem areas are from the stationing labels.

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Station Offset Label

May 19, 2012

I am trying for last hour but cannot make this work. I have attached screen shot of a dynamic label with some text. The problem is as you add degree symbols and inch (") symbols and paratheses to the text, the leader starts to intersect the station value. I want to move the leader a little below the sta. value so the station vallue is readable. When I move the leader the text moves with it. I tried everything in edit label text option but cannot seem to fix it.

[URL]

View 5 Replies View Related

AutoCAD Civil 3D :: Alignment Stations Label Style

Aug 9, 2013

I was trying to find a way to not have the last ending Station Label show up on my centerline is there a override or way to tell it to just label to the last 100 or 50 foot station?

View 4 Replies View Related

AutoCAD Civil 3D :: Put Label Only On Right OR Left Side Of Alignment?

Nov 1, 2012

How can I put the label only on the right OR the left side of the alignment?

View 2 Replies View Related

AutoCAD Civil 3D :: Profile / Alignment Label Expression

Nov 26, 2012

Here is my expression:

IF((FMOD({Raw Station}+5,15))!=0,-1,({Profile Elevation}-100*FLOOR({Profile Elevation}/100)))

I have also tried it without a pair of brackets:

IF((FMOD({Raw Station}+5,15))!=0,-1,{Profile Elevation}-100*FLOOR({Profile Elevation}/100))

and I have tried it using {Station Value} instead of {Raw Station}

Here's what it's meant to do (because it's a long one):

If the station value + 5 is not divisible by 15, return -1
If the station value + 5 is divisible by 15, return the profile elevation, 
if the profile elevation is in the 100 range, subtract 100
if the profile elevation is in the 200 range, subtract 200...etc 

Here is my conundrum: If I use the expression in a profile label, it works fine.  But if I use it in an alignment label as reference text, it returns -1 for every value.

View 9 Replies View Related

AutoCAD Civil 3D :: Add Block Or Symbol To Alignment Label?

Jul 31, 2012

This is what I'm trying to achieve, except with a Civil3D label.I want to add the circle with the typical detail callout to an alignment label.  I can format the text just fine, but can't figure out any way to add a symbol to a label.  For example, I was thinking I would create a "water meter" style with the correct number for water meters, so there would be a block or something attached to the label.

View 8 Replies View Related

AutoCAD Civil 3D :: Set Up Alignment Station Offset Label

Oct 7, 2013

I would like to set up an alignment station offset label that when in the dragged state, offsets the arrowhead from the actual insertion point on the alignment in any direction and distance I specify. I am preparing some plans for a water line. I am working at a 1"=200' scale so all of the blocks representing fittings are scaled up so they are legible.

In some instances, the fittings are right next to each other. If I place an alignment station offset label at the actual station and drag it away from the alignment, the arrowhead is pointing to the station but not the fitting. Is there a way to offset the arrowhead of a C3D label in dragged state other than in the direction of the leader?

View 1 Replies View Related

AutoCAD Civil 3D :: Model Road / Ditch Along Road

Aug 21, 2013

I need to model road with same elevation. But also need to model ditch along road which has a slope of 0.2%. how can i make a ditch with slope.

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Label Expression For Geometry Point

Oct 24, 2011

How to create an alignment label expression for Geometry Point that will show the delta angle rather than the instantaneous direction or perpendicular direction?

View 1 Replies View Related

AutoCAD Civil 3D :: Label Two Station On One Alignment In Construction Note?

Apr 11, 2013

Looking for a way to label two station on one alignment in a construction note. 

Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Label With Reference Text And Expressions

Oct 30, 2012

I'm trying to create an alignment label to display profile elevations at regular stations.  Two questions:

1.  I use an expression to set the text height.  When I add a regular text component in the label this works fine, but when I add reference text I can't seem to use the expression as text height.
2. I want to use an expression to 'Truncate' the elevation, so that 178.35m displays as 78.35.  I can't find a way to create an expression to do this (within the Alignment station labels).

View 6 Replies View Related

AutoCAD Civil 3D :: Assign / Change Alignment Label Style Set?

Oct 2, 2013

I have Civil 3D 2013 and would like to define the station tick marks.  Unfortuantely, the only style that appears on the Import pull down is "Standard".  How do I go about downloading or loading from an appropriate program folder the "Tick" style set? 

View 3 Replies View Related

AutoCAD Civil 3D :: Adding Dynamic Blocks To Alignment Label

May 14, 2013

I am using AutoCAD Civil 3D 2013. I am thinking that this may not be possible at this point but I am still going to try.  I have an alignment label style for station and offset.  I also have created a dynamic block for the border of this label to put around that label.  This call out border is not a typical single width border so the borders within the alignment style do not match and cannot be used for our designs. I have attached an image of the border around the label style for a random alignment.  So far the dynamic block has been a great fix for the border so that we dont spend a lot of time drawing in these borders for each label, but I was trying to add this dynamic block to the label style so that it would act as the border.  

So far I have tried adding the block as a component in the layout tab of the label style but it appears where I anchor it and does not access any of the dynamic attributes to make the callout box larger in reference to the text.  I know I can insert it so that in general it will be surrounding the Station, Offset, and Alignment contents, however, we frequently add additional text to our labels to callout pipe bends and other items so the box is not typically the same size. 

How I might be able to do this or if it is not possible at this time?

View 1 Replies View Related

AutoCAD Civil 3D :: How To Have Offset Alignment Created By Current Label

Jun 13, 2013

How can I have an offset alignment that I created be the current label so when I start to pick offset of my current alignment I do not want to have to go back and change the label style to my own label style.

View 1 Replies View Related

AutoCAD Civil 3D :: Alignment Label Style To Show Deflection Angle

Oct 10, 2008

Alignment, Geometry Point, Label Style that shows the "deflection angle" as either right or left at the PI point of an alignment.

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment Station Offset Label Blind Spot

Mar 26, 2013

I am labeling station and offsets from my alignment for curb returns and such and for some reason if the offset point is directly perpendicular from an alignment PC or PT the label can't find the alignment information. It's like there is a blind spot.

View 4 Replies View Related

AutoCAD Civil 3D :: Alignment PI Label With Lat Long / Station And Delta Angle

Feb 27, 2013

We are trying to label the intersection points on an alignment with the following info:

Sta:
Delta Angle
LAT
LONG

We can make it work with a Northing and Easting, but there is no option for a LAT LONG under the tangent intersection labels.  I tried to make an expression that would format a Northing as a LAT but it just gave me jibberish.

I was able to do it but adding a point at each PI and making a point reference text, but you then have to select a different point for each label....  which works but it is still a multi step process.

View 9 Replies View Related

AutoCAD Civil 3D :: Changing Alignment Label Sets Starting Station

Sep 19, 2011

Is it possible to modify a label set to a new starting station, e.g., instead of the alignment starting at 0, change it to start at 100?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved