I have Civil 3D 2013 and would like to define the station tick marks. Unfortuantely, the only style that appears on the Import pull down is "Standard". How do I go about downloading or loading from an appropriate program folder the "Tick" style set?
View 3 RepliesUsing Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created? For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y? It seems like this should be pretty easy, I must be missing something obvious.
View 2 Replies View RelatedI was trying to find a way to not have the last ending Station Label show up on my centerline is there a override or way to tell it to just label to the last 100 or 50 foot station?
View 4 Replies View RelatedAlignment, Geometry Point, Label Style that shows the "deflection angle" as either right or left at the PI point of an alignment.
View 9 Replies View RelatedI am trying to change the default label styles for AddSegmentLabel under general styles using .NET...
Dim X As Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel = CD.Settings.GetSettings(Of Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel)()
X.Styles.LineLabel.Value = strChildStyleName ... says name does not exist
or
X.Styles.LineLabelStyleId.Value = oidChildStyle ... "The type of objectId is wrong"
If I manually change it to a child style and then check the values, they are the same as what I'm trying to set them to. If you use a "parent" style then these both work. Am I doing something wrong or this another limitation?
Civil 3D 2013 - Windows 7 Pro 64 - Dell T3500 - Xeon 2.67 - 24gb - Quadro 600
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies View RelatedCan I change the alignment that is associated with an alignment label (station offset etc)?
View 4 Replies View Relatedhow do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
View 4 Replies View RelatedI did some search and got some code from 2009 post which not really working for me. Since I am not a pofr for autocad civil3D and just staring to learn how programing with autolisp, I am having trouble to debug the code:
(defun xp()(setq sset1 (ssget "X" '((0 . "AECC_PARCEL_SEGMENT")))) (COMMAND "EXPLODE" SSET1 "")
if (= (setq ss (ssget "X" '((0 . "AECC_COGO_POINT")))) nil)
(setq ss (ssget "x" '((0 . "AECC_COGO_POINT")))) );
FILTERS UNCLOSED POLYLINES(defun c:changestyle()
(setq xlabel (vlax-ename->vla-object (car (entsel))))
[Code] ....
Is there a way to set up a custom Point Label Style that will change the text color if the information entered meets particular criteria? I will be entering sample measurements taken on two (2) different dates, but if the sample data is greater than 1.0, I want it to show up a different color.
View 4 Replies View RelatedI have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.
Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
is there any quick way to assign reference aligment to pipe network parts?
I use practise to create one pipe network and afterwards i expand my pipenetwork by editing with lots of aligments (create aligment from network part function i use). Bur there occur a problem in my profile view, when i want to represent station value of aligment and there is now reference aligment in pipe part.
I need to add a ONE label to an alignment. I would like to do it via Vlisp or C#.
View 4 Replies View RelatedI am working on Street Improvement Plan using Civil 3D 2012. I have my centerline stationing set for major (100') and minor (50'). My street plan is kind of busy with a several call-out/label, leader etc. I want to set my my station for both major and minor with with decimal to read as 1+00 or 1+ 50 as opposed to 1+00.00... How to get rid of the decimal points.
View 6 Replies View RelatedI'm trying to use the _Wipeout_Circle block that ships with the straight-out-of-the-box NCS template (Civil 3D 2013 and Civil 3D 2014) to create a PI marker point in which the alignment is wiped out at the PI points. As you can see, the block itself works fine, but once used as a marker point it doesn't:
Here are the settings I'm using (again, this can be recreated straight from the NCS template):
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedI need a label style that not only labels the major stationing of an alignment, but also displays the corridor surface elevation beneath it.
10+000
|
22.10m
Something similar to above.
I can add reference text for surface elevation to the alignment label, but all I get is the ???, no surface value.
What am I missing?
Is it possible to add a prefix to an alignment station label (ex. A 100+00.00 or B 100+00.00) in Civil 3D 2010 or later?
View 5 Replies View RelatedHow to label the intersection of the alignments for 3D 2012. This command will label the station equation between alignments automatically.
View 1 Replies View RelatedI need to know how to display a proposed profile elevation in the major station alignment label, I mean, for example, I want to read in the label "0+000, 494.444". I've already edited my major station label style adding a (profile type) Reference text, and it only displays "?". I suppose I need to associate it with the correct profile, but I've not figured out how to. I show you how the label looks in the attached image.
View 8 Replies View RelatedI am working in C3D 2011. The end station on my alignment is 163+02. The last major station label is 163+00. The label text overlap. I want to turn off the end label of 163+02. The end station is not checked in my Alignment Style or in the Geometry Points style. I am assuming there is a command in the Settings/Alignment/Commands that is overriding the changes I have made in individual styles. I have found some post concerning this from 2004 but they do not seem to be applicable in 2011.
View 5 Replies View RelatedWay to snap or drape the alignment (station) labels over a surface or bring them to the elevation of a selected surface. I'd like to know how to do this if there is a way, so when I look at surfaces in object viewer I can get an idea of where problem areas are from the stationing labels.
View 2 Replies View RelatedI am trying for last hour but cannot make this work. I have attached screen shot of a dynamic label with some text. The problem is as you add degree symbols and inch (") symbols and paratheses to the text, the leader starts to intersect the station value. I want to move the leader a little below the sta. value so the station vallue is readable. When I move the leader the text moves with it. I tried everything in edit label text option but cannot seem to fix it.
[URL]
How can I put the label only on the right OR the left side of the alignment?
View 2 Replies View RelatedHere is my expression:
IF((FMOD({Raw Station}+5,15))!=0,-1,({Profile Elevation}-100*FLOOR({Profile Elevation}/100)))
I have also tried it without a pair of brackets:
IF((FMOD({Raw Station}+5,15))!=0,-1,{Profile Elevation}-100*FLOOR({Profile Elevation}/100))
and I have tried it using {Station Value} instead of {Raw Station}
Here's what it's meant to do (because it's a long one):
If the station value + 5 is not divisible by 15, return -1
If the station value + 5 is divisible by 15, return the profile elevation,
if the profile elevation is in the 100 range, subtract 100
if the profile elevation is in the 200 range, subtract 200...etc
Here is my conundrum: If I use the expression in a profile label, it works fine. But if I use it in an alignment label as reference text, it returns -1 for every value.
This is what I'm trying to achieve, except with a Civil3D label.I want to add the circle with the typical detail callout to an alignment label. I can format the text just fine, but can't figure out any way to add a symbol to a label. For example, I was thinking I would create a "water meter" style with the correct number for water meters, so there would be a block or something attached to the label.
View 8 Replies View RelatedI would like to set up an alignment station offset label that when in the dragged state, offsets the arrowhead from the actual insertion point on the alignment in any direction and distance I specify. I am preparing some plans for a water line. I am working at a 1"=200' scale so all of the blocks representing fittings are scaled up so they are legible.
In some instances, the fittings are right next to each other. If I place an alignment station offset label at the actual station and drag it away from the alignment, the arrowhead is pointing to the station but not the fitting. Is there a way to offset the arrowhead of a C3D label in dragged state other than in the direction of the leader?
This is strange. I wanted to label just the alignment name in a couple of places. I have an Alignment Name Label Style that does this. I now notice that it will capitalize some of the lower case P's in the curve label. Not the line label just the curve. They're applying the same style. It also changes back to lower case if I drag the label.
The style has one component and that is the Alignment Name and has Preserve Case set.
How to create an alignment label expression for Geometry Point that will show the delta angle rather than the instantaneous direction or perpendicular direction?
View 1 Replies View RelatedLooking for a way to label two station on one alignment in a construction note.
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000