I am using the default styles that came with C3D 2011. How can I change the colors of the corridor "frequency" lines. The lines I am referring to are those that are from the last sub assembly to the daylight line. This is prior to making any section views or surfaces. The colors have to be determined somewhere within the corridor styles I think, but I can't find where.
View 1 RepliesI created a simple corridor for a road widening. I want to plot some drawings but I do not want the frequency lines to plot. I have frozen the layers containing these lines. I have also set the layers to not plot in the layer properties manager. The frequency lines still plot. I've obviously missed something. What do I need to do to stop the frequency lines from plotting?
View 4 Replies View RelatedI am having an issue where I have set through my codes that i do not want to view the frequecy lines in my corridor. It is displaying right but when i go to print all the frequency lines print. the attached images show my screen of what i am looking at and the other is a pdf of what prints.
View 4 Replies View RelatedHow to turn off the frequency lines in my corridor. I know it has something to do with codes and styles but I just can't seem to get it to work.
View 2 Replies View RelatedHow do I make my corridor feature lines to change color? I want daylight cut to be red and daylight fill to be green.I've checked under "Toolspace/Settings/General/Multipurpose styles/Feature line styles/Corridor daylight line - Cut" but it doesn't work.
View 4 Replies View RelatedI am using the COGO Points from Corridor command but would like to limit the freqency of the created points to only every 50 ft (half station) or so. Is there a command I can change to make this happen ??
I've checked the CreatePointsFromCorridor command setting and it doesn't seem to be there...
I am using the Mill&Overlay sub set to overlay an semetrical road and a crown offset of zero. I one file the crown point feature line has gaps in it and in another file it zig zags along the road.
I forgot to mention that the triangles and the cross section look as expected. trouble is I want the crown profile
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have a road corridor with feature lines connecting the road edges (cyan), ditchline (dark green), daylight_cut (yellow), daylight_fill (green) and daylight (white). At certain random locations along this corridor I am getting feature lines which span from one station to another, ignoring all of the corridor sections in between. The image below shows a daylight_fill line spanning over 60m, even though there is a daylight line through this region.
In this area a ditch line and a daylight_cut start at 4+110, skip over the next cut section at 4+120 and jump over a hundred meters to the next piece of ditch at 4+280..This corridor builds clean - no error messages reported.
Is this the only way to extract feature lines from a corridor i.e. selecting each one - it gets a bit tedious.
Is there any method to select a corridor and extract all the feature lines that are set to display?? I think third party software (Sincpac?) can do this but this is not an option for me and I am not well versed enough in .NET to write something to achieve this myself.
No feature lines in offset corridor
View 3 Replies View RelatedBecause there is a PI in my alignment, the section lines in my corridor are overlapping creating problems with the surface. Is there anything that I can do in this situation?
View 6 Replies View RelatedI need to snap to some feature lines in my corridor, i.e. Back_Curb, Flowline_Gutter, etc, and I have the drawing containing the corridor I need to snap to as an XREF. I can snap to other objects in the XREF, but not the Corridor Feature Lines themselves. Apparently, after some digging, Autocadd hasn't come up with a solution for this problem, and many others have the same issue. I run C3D 2012, updated.
View 4 Replies View RelatedIs there an easy way to get co-ordinates targeting the edge of road and daylight features along a corridor at 20m intervals without manually going through it or using createpointsfromcorridor?
View 4 Replies View RelatedMy corridor Feature Lines for Daylight Jump across in different areas (see attached PDF)
when I look at it in 3d it looks ok but the plan view the jumped lines show up.
How do i get the feature lines in my corridor to change their style based on the code set style selected?Whats the point of defining featureline styles in the code set style if they don't change in the corridor? They only get used when you first create the corridor?
Is there something I am missing or is this the intended workflow?
I'm having a random issue with the daylight ties lopes not tieing to the EG surface at all stations in the Corridor Section Editor. Some stations daylight fine. In plan view the daylight lines vary left & right as expected but don't display at all in Section Editor.
Some background info:2012 Civil 3D SP1 / 64 bit / WIN7Simple corridor used1 alignmentSame fg profileSame drefd EG surface (set all targets for daylight LT/RT)Only one assembly applied to entire corridor Attached are 2 captions of the issue I'm having which each have a cut & fill occurrence as well as a caption of the entire align. & corridor. I did try deleting corridor & recreating and even recreated a simpler assembly and still have the daylight issue in same areas of corridor.
Any way to change the colors in a corridor. With our plot styel, the magenta is really really thick and we always end up turning off corridor. I was wondering if there was a way to just change the colors.
Also, I didn't see a separation of the elements for the corridors. I know with corridor surfaces, there's a breakdown of the major and minor contours and those could easily be changed, but I didn't see a breakdown at all for the corridors. The main reason this is a problem is because I'm trying to add slope arrows through my corridor and I can't turn off the corridor without turning off the slope arrows as well. Where would I go to see what layer each entity on the corridor on...I'm espeically looking for slope arrows and any other type of labels like that...
I am trying to find out if there is a way to change the code for the Corridor Section Points Report. See attachment.
In page 1 of the attachment you will see the names that we prefer for the different zones in our assembly as per our Standards.
On page 2 is the default names that C3D spits out as defaults (under String Cut).
We are running C3D 2012.
I would like to have my corridor section points report to have different labels for the points like Edge of Shoulder or EOP instead of labels like P2 and Hinge. Is the only way to do this to somehow change the codes in the stock subassemblies?
Civil 3D 2014
I have a road corridor and need to create sample lines at a 50m interval, as well as at every horizontal and vertical turning point. While the 50m stations and the horizontal turning points are easy to add (using the alignment), I can't seem to find where/how to add the vertical points (they have to be extracted from the profile).
Running the Feature Line Report I noticed the horizontal turning points are not used in the report: it only reports the 50m stations (so I guess the same will happen to the vertical points?).
how to add the vertical turning points to the sample line group and how to include both horizontal and vertical points in the Feature Line Report.
i am looking for a lisp routine which can change all lines in color yellow ( in different layers) to color 8.
View 9 Replies View RelatedI have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies View RelatedCopy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
I got some complex drawings (15-25mb clothing design), any ways to change example all RED lines til a other color with just few clicks or it only possibly to do when I work in lays. I just head to work in lays
View 3 Replies View RelatedLately when I plot my drawings the diagonal lines plot gray. I didn't change the line color. Can't figure it out.
View 1 Replies View RelatedWhy do our feature lines all come in as the color white when xreffed into a drawing? Feature lines show up just fine in our topo drawing, so then we xref it into our design drawing and they all show as if the color is white when is is not in the layer properties. All other items (symbols, points, and lines) come in as the color they were drawn in the topo drawing.
View 3 Replies View RelatedI created sample lines and section views for my road projects. I set all line works to appropriate layers except for "Segment and Points". Cannot change from layer "0".
I right click the existing grade on my section views, click "edit section style", click "display", then change the layer of Segments and points and click "OK", "apply".
Go back to my drawing, verify the layer but still layer "0". I tried so many times, read the manual, call friends but no luck. I am tempted to "explode" my drawing.
I'm doing a photo trace in Photoshop using the pen tool. The lines, they are gray. Some of the photo is gray. This makes it a little hard to see the adjustments when using the direction points to adjust the curves. Is there a way to change their color? I'm working in a work path in the paths box.
View 13 Replies View Relatedis it possible to change all of the black lines in the cartoon image to a different color via special tools? But leave anything else intact...
View 3 Replies View RelatedHow do I change the grid lines from solid to a dotted line in the Section View?
View 3 Replies View Related