AutoCAD Civil 3D :: Change Grid Lines From Solid To Dotted Line In Section View?
Sep 5, 2013How do I change the grid lines from solid to a dotted line in the Section View?
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Section View Grid Labels
Dec 18, 2013I am using Civil 3D 2014. I have a section view style that specifies 10-ft majors, displaying text labels for 10-ft majors. However, per the attached image, my section view shows the first label at a 5-ft interval and I have another that does not show the top 10-ft major.
View 1 Replies View RelatedAutoCAD Civil 3D :: Section View Grid Spacing?
Jun 4, 2013I learnt that grid spacing in Section Views/Cross Section Sheets is controlled by the Bottom Horizontal Axes minor tick intervals and Left Vertical Axes minor tick intervals in the Section View Style dialog box(see Capture). If this is true what, then, is the function of the grid spacing settings in the "Plot Are" Tab of "Group Plot Style" dialog box (see the other Capture).
View 2 Replies View RelatedAutoCAD Civil 3D :: Section View - Grid X Y Values
Oct 7, 2012the X value which is the section distance, and Y values are elevation.
Y - values how to limit them to 50' range.
X - values 23' range.
AutoCAD Civil 3D :: Road Section View Grid Too Thick In Preview
May 12, 2012I already check the setting layer assignment with color and linetype all bylayer using the office ctb BUT during preview in plotting it shows too thick. What do I miss to check or do?
View 2 Replies View RelatedAutoCAD Civil 3D :: Profile View Horizontal Grid Lines
Jun 29, 2012Im having an issue where the horizontal grid lines in my profile are projecting out past my last specified station (see attached) My profile begins at sta: 1+00 and ends at 1+12. My user specified station range is sta: 0+80 to 1+30. I didn't have this issue in release 11 (im currently using release 12) with this profile view style and i did hundreds of profiles with this very same style.
AutoCAD Civil3D R12 SP2
Windows 7 Pro 64 bit
Intel Core i7-2600 3.4GHz
8.0 GB RAM
Nvidia Quadro 600
Photoshop :: Brushes Create Dotted Lines Instead Of Solid
Jul 15, 2012I just received an almost-new Wacom CTL-470 tablet from my father yesterday, so naturally I began fooling around with Photoshop line drawings and simple art.
The initial problem I discovered was that, oddly enough, the basic brush tools, when dragged, would not create a solid line. It would only create a dotted line, the spaces between dots varying with speed of the pen against the tablet.
If I dragged the pen slowly enough (very... very slowly), it would create a kind of shaky line, which was just dots very close together.
Naturally I thought it was the tablet's fault, but upon trying to use the mouse to do the same function, the problem persisted.
I use Photoshop CS and I didn't change any settings at all today.
I would also like to know how I can use my tablet to create a tapering effect with my pen pressure. The "pen pressure" setting in the Brushes menu seemed to have no effect.
Here's an example of the issue, both in large brushes and a smaller one in the background.
AutoCAD Civil 3D :: Show Locations Of Cross Section Sample Lines On Profile View
May 15, 2013recommend a good way to indicate the location of cross section sample lines in a profile view (of same alignment) as vertical lines? the sample lines have been created at user defined locations from polylines, and do not follow a particular station order. my first thought was to use transparent command to draw line in profile view using station from plan view, but i have in excess of 100 cross sections, and that may be time consuming.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
Illustrator :: Format Part Of Solid Line To Dotted?
Apr 10, 2013Is it possible to format part of a solid line to dotted? If so, how?
View 1 Replies View RelatedPhotoshop :: How To Draw Straight Dotted Line With Solid Arrows In CS6
Feb 5, 2013I am trying to use the line shape tool. However, the shape stroke type affects the arrows. Does it mean that I have to draw the line first, without the arrows, and then add the solid arrows to the line
View 3 Replies View RelatedAutoCAD Civil 3D :: Sample Lines / Section Views - Unable To Change From Layer 0
Jul 15, 2012I created sample lines and section views for my road projects. I set all line works to appropriate layers except for "Segment and Points". Cannot change from layer "0".
I right click the existing grade on my section views, click "edit section style", click "display", then change the layer of Segments and points and click "OK", "apply".
Go back to my drawing, verify the layer but still layer "0". I tried so many times, read the manual, call friends but no luck. I am tempted to "explode" my drawing.
AutoCAD Inventor :: Section View Not Parallel With Section Line?
Nov 19, 2011why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedAutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline
Oct 12, 2012I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedAutoCAD Civil 3D :: Alignment Style - Section - Line Marker In Section
Mar 26, 2012C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
AutoCAD Civil 3D :: Unidentified Section In Section View
Nov 8, 2012I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
AutoCAD Civil 3D :: Section View Properties - Section Tab?
Oct 16, 2012My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedPhotoshop :: Creating Dotted Lines/dotted Circles
Sep 15, 2004is PS 7 able to do dotted lines and circles? If I create a selection (circle or rectangle) can it render dotted lines?
View 2 Replies View RelatedAutoCad :: How To Change Line From Solid To Hidden Or Dashed Line
Sep 7, 2013I must be missing something fundamental when trying to change a line from a solid line to a hidden or dashed line in Autocad 2000. I use the ltype command then load either Hidden, or dashed ISO,or both, and invariably the scale is way off in that I always end up with a still solid line, after using modify properties. After all that, every line I draw after that comes out dashed. Maybe I should fool with the layers? Is there a basic procedure I should follow here?
View 2 Replies View RelatedAutoCad :: Change Solid Line Into Dashed Line
May 24, 2012I imported a file from ai. as dxf. Now, I want to change Solid line into dashed line. I tried doing it with properties, checked its scale. But it is still not changing.
View 3 Replies View RelatedAutoCAD Inventor :: View Arrow Instead Of Section Lines
May 30, 2012 inventor 2012. for instance for a aux. view if it is not in-line with the parent view it puts a section line. is there a way to have a single view arrow?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View
Nov 28, 20121. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
AutoCAD Civil 3D :: How To Create A Section View For A Pond Other Than Quick View
Oct 1, 2012how to create a section view for a pond other than quick view.
View 2 Replies View RelatedAutoCad 3D :: How To Make One Solid Line From Many Lines
Jul 21, 2011I have the following problem: I have loads of lines in 3D, some longer, some very short. With PE i can join them using fuzz, but since some lines are next to another line then it tends to make the line go back and forth in some places. What i want to do is somehow make an average line from all the other lines.
View 2 Replies View RelatedAutoCAD Civil 3D :: Turn Off Elevation Grid In Section Editor
Oct 1, 2012How do I turn off the elevation grid in the section editor when looking at the cross-sections of my corridor?
View 1 Replies View RelatedAutoCAD Civil 3D :: Project Solid Objects Into Section Views?
Oct 25, 2012I am using C3D 2012. I my drawing I have 3D solid objects that I want projected into my roadway x-sections. When I use the menu command to "project objects to section views" and select "solids" I get the message "no objects to project". Are their different types of solid objects in autocad?
View 9 Replies View RelatedAutoCAD Civil 3D :: Material Section Style - Hatch Solid Not Changing
Apr 17, 2013I have section views created from corridor model that also have had materials computed. The cut and fill areas are hatched solid and I want them set as another hatch style but after attempting to adjust the pattern it does not change. How does one change this and have it show? Civil 3d 2013 is currently being used but may have to back track to 2009.
Dell Precision T3500
Windows 7 x 64
Intel Xeon @ 3.07 GHz
12 GB RAM
NVIDIA Quadro 4000
Civil 3D 2013
Illustrator :: Any Way To View Internal Lines Of Perspective Grid?
Dec 5, 2012It would be very beneficial to view all of the internal lines of the sectioned rectangular prism that the perspective grid consists of. This is a standard workflow for drawing 3 dimensional objects. Without this, it is very difficult to draw accurately.
Essentially this but in perspective mode: [URL] .....
This doesn't appear possible to in CS5. Please specify if this is not the case and if it is possible in CS6.
AutoCAD 2010 :: Starting Points Of Lines Text And Objects Are At Grid Line Intersections
Jun 26, 2012I cant start drawing an object from anywhere else( ie. inside a grid) except form the points where grid lines intersect. How do i go back to old system? I need to get some work done fast.
View 2 Replies View RelatedAutoCAD Inventor :: Creating Linear Section View From Curved Line?
Jul 23, 2012Creating a linear section view from a curved line
View 5 Replies View RelatedAutoCAD LT :: 2012 - Dashed Lines In Model Space Plot As Solid Line
Mar 3, 2013I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies View Related