AutoCAD Civil 3D :: Profile View Horizontal Grid Lines

Jun 29, 2012

Im having an issue where the horizontal grid lines in my profile are projecting out past my last specified station (see attached) My profile begins at sta: 1+00 and ends at 1+12. My user specified station range is sta: 0+80 to 1+30. I didn't have this issue in release 11 (im currently using release 12) with this profile view style and i did hundreds of profiles with this very same style.

AutoCAD Civil3D R12 SP2
Windows 7 Pro 64 bit
Intel Core i7-2600 3.4GHz
8.0 GB RAM
Nvidia Quadro 600

View 9 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Profile Horizontal Grid

Oct 29, 2012

I am setting up plans and profiles for utilities. Most of the profiles are working fine. I have one that the horizontal grids stick out about 50 feet left of the profile view. why one is squirrely and the other are good.

I'm using C3D 2012 on 64 bit system.

View 3 Replies View Related

AutoCAD Civil 3D :: Profile View Horizontal Geometry Bands

Sep 9, 2013

I'm using C3D 2012.  I created a profile view for a straight horizontal alignment.  The band label for the horizontal won't appear for this particular straight aligment.  I have a few other alignments that has curves in it and the profile view displays the labels fine.

I tried to create a new straight alignment again, create a profile view but I get the same results.I also tried it on a new drawing using the NCS metric template with same results.

I can think of (if this is a bug) is to extend my alignment by say 0.1m and add a new IP at the correct alignment end, mask that on plan and end my profile view to the right length. 

View 5 Replies View Related

AutoCAD Civil 3D :: 2013 Profile View - Grid Displays Incorrectly

Oct 28, 2013

After upgrading from 2013 to 2014 we have a few drawings that had profiles created in 2013 and now when we open the drawing in 2014 the profile view disappears and so we regen and then we get a fatal error. I ran an audit and there are no errors, I re-sycronized the surfaces, i also ran an audit on all the xreferences.

View 1 Replies View Related

AutoCAD Civil 3D :: 2013 Profile View - Grid Displays Incorrectly

Oct 18, 2013

We are having an issue with profile grid shooting off to the left of 0+00 rather than starting at 0+00 and stopping at the end of the profile.  There is nothing in the settings that I can find that is telling the grid to extend close to 2000' to the left. Three of the four profiles are doing this.  One of them displays correctly, but there are no differences that we can find in the settings.

View 7 Replies View Related

AutoCAD Civil 3D :: 2013 - Profile View Minor Grid DOT Displays Double Up

Nov 7, 2013

If you can see it in the image below, I am showing my minor grids with a dot linetype. I have a total of 6 profiles all of which appear to have the dots double up in random areas, they also print like this.

Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional

View 4 Replies View Related

AutoCAD Civil 3D :: Change Grid Lines From Solid To Dotted Line In Section View?

Sep 5, 2013

How do I change the grid lines from solid to a dotted line in the Section View?

View 3 Replies View Related

AutoCAD Civil 3D :: Show Locations Of Cross Section Sample Lines On Profile View

May 15, 2013

recommend a good way to indicate the location of cross section sample lines in a profile view (of same alignment) as vertical lines? the sample lines have been created at user defined locations from polylines, and do not follow a particular station order. my first thought was to use transparent command to draw line in profile view using station from plan view, but i have in excess of 100 cross sections, and that may be time consuming.

Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM

View 2 Replies View Related

AutoCAD Civil 3D :: Moving Profile View Labels With The Profile View?

Jul 20, 2012

I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself.  ?

Civil 3D 2012

View 2 Replies View Related

AutoCAD Civil 3D :: Diagrammatic Representation Of The Horizontal Alignment In Profile Views

Sep 1, 2013

Some authorities (in Australia) require profile views to include diagrammatic representation of the curves, transitions and slopes.   For example refer to the image below, which are from NSW Rail Corp guidelines.  Similar information is required by some Council/Authorities for road projects.

View 1 Replies View Related

AutoCAD Civil 3D :: Profile Setup - Anchored To Horizontal Geometry From Certain Point

Sep 26, 2012

is there a way to set up the profile so it is anchored to horizontal geometry from certain point. that way when i change the alignment in the middle it won't cause profile to be shifted because station changes (length changed) while the vpi stations stay the same as before.

i can make a program in .net to specify a station and move all the vpi station by that amount which can be obtained easily by taking the length before you modify minus length after you modify.

Pretty common problem. it's not that hard to do in really the logic is defined. i have this alignment that's 60km long that's only one portion. hecka lots of horzontal curve and vertical curves. over 100.

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 2 Replies View Related

AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View

Nov 4, 2013

I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?

View 9 Replies View Related

AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command

Feb 28, 2011

I try to make curb return profile without profile view like a intersect command.

I was make curb return alignment but I can not find profile command without profile view.

View 6 Replies View Related

AutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile

Nov 22, 2013

I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.

Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit

View 7 Replies View Related

AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update

Jul 24, 2012

I have yet to produce a profile. I created a polyline and turned it into an alignment.

Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.

Is the sample5 an alignment that sits on the surface? how come there is still no profile?

View 3 Replies View Related

AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View

Nov 28, 2012

Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir  shoreline. 

1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing. 

2.the points having higher elevation are the  top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.

3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir. 

View 2 Replies View Related

Illustrator :: Why Are Horizontal Lines Missing On PDF File When View On IPad Or IPhone

Mar 9, 2014

I created my resume with horizontal lines to divide the sections, work history, education for example. When I exported the file as a PDF, it opens beautifully in Adobe Reader. However, when I open it on my iPad or iPhone, those lines are missing! What can I do to make those lines appear when I am viewing on my iPad?

View 1 Replies View Related

AutoCAD Civil 3D :: Change Radius To Degrees In Horizontal Geometry Band Set Profile

Sep 25, 2013

How to set change the radius to degrees in horizontal geometry band set profile.

View 2 Replies View Related

AutoCAD Civil 3D :: Edit Profile Without Having It On Profile View?

Jul 31, 2013

A tabular data sheet for profiles could be very interesting.

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: Shifted Profile Within Profile View?

Jan 22, 2013

I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport.  The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into.  But when I switch from model space to paper space in my layout sheet (the file the profile dwg  is referenced into) the profile moves to the wrong station within my profile view in paper space.

The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.

The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.

View 2 Replies View Related

AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View?

Jul 24, 2012

I am a C3D newbie who used  ground survey points  (Serrano_EG_surface)  that  generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then  into individual CL alignments. The first alignment ,which has its left and right offsets   do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.

1. Are the ground survey points good enough  so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a  preliminary drawing for environmental permitting. ?

2. When I check the object browser,  the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.

3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).

4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.

View 2 Replies View Related

AutoCAD Civil 3D :: Profile Grid Disappears

Nov 20, 2013

When I open my profile file in civil 3d 2014 the grid disappears so I regenerate it and they are back. The problem I am having is when I run my cursor over the grid, it will give me a fatal error.

View 5 Replies View Related

AutoCAD Civil 3D :: Profile Grid Overlap

Jul 6, 2011

I have the profiles grid to display as my company has displayed them for several years and it worked perfect in 2009. Then we switched to 2011 and now the grid is overlapping back on itself (see attached).

I am working with my reseller and I have done everything that I can think of to get this to not show with no luck. This needs to be fixed by Autodesk in my opinion since we pay for the product to work and it did before. This is apparently an issue in 2012 as well.

How to get it back to the way it was before?

View 2 Replies View Related

AutoCAD Civil 3D :: Mark Items In Alignment View To Display In Profile View?

Dec 20, 2012

I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view.  I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items.  The marker I would like to use will be something like the vertical style grade break markers.

Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?

View 9 Replies View Related

AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View

Nov 28, 2012

1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?

2. How can I best come up with the right volume to fill.  

3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet) 

4. How to I render a rock fill in this cave-in.  

The attached aerial image , has survey or cogo points  that are imported to surface, to become surface points. . So I wanted to create a surface profile  below  and an outline of  fill  above it.  Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment. 

But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not)  is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area. 

The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1

View 5 Replies View Related

AutoCAD Civil 3D :: Working Back And Forth From Plan View And Profile View

Jan 18, 2013

I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?

View 9 Replies View Related

AutoCAD Civil 3D :: Vertical Grid Not Appearing In Profile

May 27, 2013

the vertical grid is not showing up even though is turned on in view style! tried different things but nothing seems to work, and the horizontal grid doesn't clip to the profile even though i select the option! it goes way up until profile frame!

Windows 7, intel I7, 8 MB RAM, civil3d 2013.

View 9 Replies View Related

AutoCAD Civil 3D :: Profile Grid And Text Not By Layer?

Oct 1, 2012

When I create a profile, then explode it, none of the text or lines are bylayer.  My company wants everything to be bylayer.  I can't figure out which style controls the profile to make everything bylayer after it is exploded. 

View 2 Replies View Related

AutoCAD Civil 3D :: Add An Object From A Profile View To A Plan View

May 29, 2013

Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.

View 9 Replies View Related

Illustrator :: Any Way To View Internal Lines Of Perspective Grid?

Dec 5, 2012

It would be very beneficial to view all of the internal lines of the sectioned rectangular prism that the perspective grid consists of. This is a standard workflow for drawing 3 dimensional objects. Without this, it is very difficult to draw accurately.
 
Essentially this but in perspective mode: [URL] .....
 
This doesn't appear possible to in CS5. Please specify if this is not the case and if it is possible in CS6.

View 4 Replies View Related

AutoCAD Civil 3D :: Split Profile - Vertical (elevation) Grid Marks

Nov 19, 2013

I received a file from another office which had a split profile. The only issue that my project manager and I have with it is that the profile lines themselves run from station limit to station limit, and therefore the profile lines run through the vertical (elevation) numbers. Is there a way to adjust the vertical (elevation) grid marks to clean this up?

I've attached a picture of how it looks now.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved