I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
How to "NOT" label the top elevation in a profile view? (see attached pic)
I can live with the far right and left vertical labels if I could turn the top elevation off.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
I click on my pipe in profile. Right click and add label. I see nothing, no label. All layers on and un-frozen.
View 6 Replies View RelatedIs there a way to get the ProfileBandLabelGroup labels from a profile view. I see I can get the ProfileViewBandItems, but don't see a way to convert it into the labels. I'm looking to override the text components. The code below does that, it's just getting the object without having to have the user select it.
ProfileBandLabelGroup labels = ssResult.ObjectId.GetObject(OpenMode.ForWrite) as ProfileBandLabelGroup;
LabelStyleTextComponent textComponent = labels.GetAt(0).GetTextComponentIds()[0].GetObject(OpenMode.ForRead) as LabelStyleTextComponent;
Autodesk.Civil.DatabaseServices.LabelGroupSubEntity label = labels.GetAt(0);
label.SetTextComponentOverride(textComponent.ObjectId, "blue");
I have a profile view created with several surfaces including a proposed surface. The stationing on the X-Axis of the profile view corresponds correctly with the PT's, PC's etc on the proposed surface profile, however the the labels that are actually on the profile line are giving me values such as PC: 0+668.62 when it should read 21+93.63.
I can't seem to find a correlation in the two numbers and am having difficulty changing the style to correctly reflect the stationing.
I cannot for the life of me get the start and end labels for any band to display within a profile view. Each band has the 'label start' and 'label end' labels ticked and the major/minor labels display at every other point but don't display anything at the start of the view or end. The profile views are taken from a simple straight alignment and the profiles themselves extend the full length of the view.
View 9 Replies View RelatedI've attached an image of a storm drain invert label for a storm drain profile. As you can see, the middle manhole has all three inflow pipes labeled. Is there a way to only label the inverts of the two pipes shown in the profile view?
C3D 2014
Windows 7 64-bit
I am having a problem with moving my profile grades. I go to Utilities under Corridors and create a profile for the left and right curb. They show up in my Alignment Profile, but when I click on one to move it, it disappears. When I type regen, it shows back up. I am trying to set my crossection grades in my Multiple Section Views. I first create my Profile from Surface, then do a proposed centerline grade by Draw tangents with curves. I create the corridor, put in the regions, go to corridor properties and pick the right and left corridor lines I have created. Then I set the existing surface and attach it to my profile. I create the sample lines and the Multi Section Views. Where am I screwing up?
View 4 Replies View RelatedI'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedI try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
A tabular data sheet for profiles could be very interesting.
Civil 3D (2013)
I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport. The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into. But when I switch from model space to paper space in my layout sheet (the file the profile dwg is referenced into) the profile moves to the wrong station within my profile view in paper space.
The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.
The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.
I am a C3D newbie who used ground survey points (Serrano_EG_surface) that generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then into individual CL alignments. The first alignment ,which has its left and right offsets do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.
1. Are the ground survey points good enough so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a preliminary drawing for environmental permitting. ?
2. When I check the object browser, the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.
3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).
4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies View RelatedIs there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies View RelatedC3D 2012..Have a profile I'd like to have the PC, PT shown. (No Problem)But in doing so it also puts the PI'S of each of these curves in the profile view.
Is there a way to turn off the PI's and leave the PC's and PT's on?
I am using the profile sample VB.net program to create an alignment, profile view and profile. The profile view defaults to start at station -0+25. I want to set the Profile View starting station based on the "Align_strt_sta" value I have defined based on the Alignment Stationing. I have tried the .StationStart() shown below, but I just get a unhandled exception.
' Create the profile view and add it to the alignment's ' collection of profile views. If oProfileView Is Nothing Then id = ProfileView.Create(m_CivilDoc, Prof_View_Name, PROFILEVIEW_BANDSET_STYLE_NAME, Align_Name, pviewposition) oProfileView = pviewTransaction.GetObject(id, OpenMode.ForWrite) End If 'oProfileView.StationStart() = Align_Strt_Sta oProfileView.Description = "Profile view of alignment '" & m_SampleAlignment.Name & "'" oProfileView.StyleName = PROFILE_VIEW_STYLE_NAME
I discovered a weird thing that seems like a bug...I tried to hatch manually while in profile view (couldn't figure out how to do what I want with the profile view hatching options) and it seems that if I try to make one hatch (by picking internal points) that includes multiple structure profiles on the same profile view, the first structure profile for that profile view works as a hatch boundary, but subsequent structure profiles are basically ignored if I keep trying to pick internal points to make a composite hatch.
I assume it's because of this same bug that I can't create a hatch by choosing boundary objects and using two structure profiles in the same profile view as boundary objects.
how to hatch using the profile view hatching and to use a pipe network as a boundary, that would also be useful.
if I hatch by picking internal points, and pick one area with a structure profile as part of the boundary, and then I pick a similar area in a different profile view, everything works fine...it's just the second (and though I don't have more than 2 structures per profile view in my drawing, I would assume any subsequent) structure profiles that I try to use as hatch boundaries that AutoCAD is basically ignoring.
When inserting a piece of my watermain into my profile view, the watermain is not stopping at the edge of the first profile view. Instead it just continues out of the view. See attachment. When I change the style of the pipe to just centre line I do not have this issue. It seems the hatching is the issue.
View 1 Replies View RelatedI want to have the ability of take measures on my profile view.
The tool would consider the vertical exaggeration and give me the right distance and slope .
Civil 3D (2013)
How to upload Civil 3d Sample profile with full band
View 1 Replies View RelatedIs there a way (and I'm just missing it) to have a pipe from a pipe network only be shown 'cut-off', with the typical 'cut-off' shown on the profile view? see the screen shot of sketch of what I'm referring to.
View 2 Replies View Relatedhow can i set the smub of a structure at the crown of a pipe not at the invert?
View 3 Replies View RelatedI'm having difficulty adding bands to a profile view in Civil 3D 2013 in that the bands appear to be come corrupt in not showing the data (the check box to show is unselected, even if I set it to show) and when I go into the UI and turn the bands to show the bands don't show the information correctly.
Alignment align = profileView.AlignmentId.GetObject(OpenMode.ForRead) as Alignment;
Profile prof = profObjId.GetObject(OpenMode.ForRead) as Profile;
if (!profileView.IsWriteEnabled) profileView.UpgradeOpen();
profileView.StyleId = profViewStyleObjId;ProfileViewBandItemCollection bottomBandItems =
[Code] ..........
I've been trying to set up a profile view to look like the Section i've attached (Done Manually) but having great difficulty with the bands.
Any detailed long-sections of a pipe network done with C3D that i could work off.
If I have a profile view that I split in the middle, how can I add a gap between the two sections?
View 2 Replies View Related