How to "NOT" label the top elevation in a profile view? (see attached pic)
I can live with the far right and left vertical labels if I could turn the top elevation off.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
I just created a profile by choosing my PVIs and linking them together with tangent curves. How do I add labels to show the vertical curve properties (K value, curve length, station of PVI, elevation of PVI...)? I'm guessing I have to edit the label style?
View 2 Replies View RelatedOn our road profiles, we have to show that low points and high points are adjusted to maintain a minimum of 0.6%. see attached screen shot. Currently, I am calculating the adjusted low point and editing the profile label. Since I can't figure out how to edit one label in a data band, I've been wiping out the old elevation and typing in the new elevation over it.
Is there a way to get C3D to do the calculation for me and populate the labels with the adjusted elevation?
Civil3D 2013
Windows 7
I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
I have a large scale industrial project with multiple road profiles and sections sheets. I find that when I plot my drawings manually by opening the drawing everything comes out fine. But when I publish the drawings manually or thru Sheet Set Manager, it shifts my vertical curve labels on my profiles down, which then conflicts with the profile linework (see attached image). Unfortunately manually plotting these drawings is not an option. Because of the amount of information in each drawing it takes 3-4 mins to open and we have 200+ drawings in a single set of drawings, which we have multiple sets of drawings for the project.
View 2 Replies View RelatedI click on my pipe in profile. Right click and add label. I see nothing, no label. All layers on and un-frozen.
View 6 Replies View RelatedIs there a way to get the ProfileBandLabelGroup labels from a profile view. I see I can get the ProfileViewBandItems, but don't see a way to convert it into the labels. I'm looking to override the text components. The code below does that, it's just getting the object without having to have the user select it.
ProfileBandLabelGroup labels = ssResult.ObjectId.GetObject(OpenMode.ForWrite) as ProfileBandLabelGroup;
LabelStyleTextComponent textComponent = labels.GetAt(0).GetTextComponentIds()[0].GetObject(OpenMode.ForRead) as LabelStyleTextComponent;
Autodesk.Civil.DatabaseServices.LabelGroupSubEntity label = labels.GetAt(0);
label.SetTextComponentOverride(textComponent.ObjectId, "blue");
I have a profile view created with several surfaces including a proposed surface. The stationing on the X-Axis of the profile view corresponds correctly with the PT's, PC's etc on the proposed surface profile, however the the labels that are actually on the profile line are giving me values such as PC: 0+668.62 when it should read 21+93.63.
I can't seem to find a correlation in the two numbers and am having difficulty changing the style to correctly reflect the stationing.
How I have come to this question is through the process of trying to realistically show a hydrant in profile view. First off it it possible to create a completely vertical pipe in C3D? Also if you can, is it possible to show that in profile view? Basically, what I am trying to avoid is representing a fire hydrant pipe by creating some sort of custom cyclinder part in partbuilder. I have done this, but do not like the results.
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
Is there a way to get the vertical scale property of a profile view and not use COM?
View 4 Replies View RelatedI cannot for the life of me get the start and end labels for any band to display within a profile view. Each band has the 'label start' and 'label end' labels ticked and the major/minor labels display at every other point but don't display anything at the start of the view or end. The profile views are taken from a simple straight alignment and the profiles themselves extend the full length of the view.
View 9 Replies View RelatedI've attached an image of a storm drain invert label for a storm drain profile. As you can see, the middle manhole has all three inflow pipes labeled. Is there a way to only label the inverts of the two pipes shown in the profile view?
C3D 2014
Windows 7 64-bit
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies View RelatedI am having a lot of problems with my vertical curve labels. I created a style that shows the length of the vertical curve, the k-value, the end and start elevations, and the elevation and station of the PVI, as shown. My problems are the fact that when I want to flip a label, they all flip (shown in the second picture). I also have noticed that there is only one drag point. Is this a setting that I unknowingly edited, or is it possible to flip labels individually?
View 9 Replies View RelatedI have two different label styles set up under Profile > Label Styles > Major Station.
I would like to have one of these labels applied to tangents in my profile and a the other one to curves.
I just recently was upgraded to C3D 2013 and I am designing my first road using the software. I've been having all sorts of fun and frustrations with Corridors and Cross Sections and learning slowly, but its all the little things that keep bogging me down.
One of the problems I have run into is when I use the Code Set label for Grade/Slope in Cross Sections I get label that reads -2.00% and then the word "Vertical". Is there an easy way to get rid of the word "Vertical" in every one of my 90+ Cross Sections? I checked under Label Style and it seems the only option is {Link Grade} which is what puts the Slope and Vertical. I mean what is the purpose in that word even appearing? I know that I can right click on the label and change visibility to False and it won't show, but I shouldn't have to do that for 90+ Cross Sections. Also I've seen the word "Horizontal" labeled as well and I don't want that word to show either.
acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
I would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?
View 1 Replies View RelatedI would like to have the leader arrow attached to the rim of the structure in profile view. Now they are attached along the side of the structure well below the rim. This is for the dragged labels. How can I adjust the arrowhead attachment point?
View 1 Replies View RelatedSeems like a bug on Autocad Civil 3D 2013. I followed all the tutorials to design a circular vertical curve on a profile and it just dont work. I put circular on settings, click on circular curve by PVI button, the software even ask the radius and it end up designing a parabolic curve.
View 2 Replies View Relatedthe vertical grid is not showing up even though is turned on in view style! tried different things but nothing seems to work, and the horizontal grid doesn't clip to the profile even though i select the option! it goes way up until profile frame!
Windows 7, intel I7, 8 MB RAM, civil3d 2013.
I did a grading, created surface with it and draw a profile view. Everything seems to be good, except with the vertical geometry band. I need to fix slope and length only at break point, means PI (blue line), but aligment has created more PI with each surface tringular line at intersection (us i note). Is there any why to specify PI only at a break points?
I can erase PI manually on static profile view mode, but i desire to do it in dynamic mode..., in case when conditions changes.
I am working on a corridor. I have a proposal profile, and now i wanted to add a vertial curve between the new profile and exsiting. (see attached.) but i have not done before.
View 4 Replies View RelatedWhen making a profile the actual scale of the profile does not match the vertical text. The scale is 1"=40' hor and 1"=4' ver with a 10:1 exageration.
See sketch below
When I make profile sheets the vertical scale (text) if off by 4' (below). I checked all the settings and they appear to be correct. When I make a profile the scale is correctly shown.
View 1 Replies View RelatedHow do i correct the veritical profile for a given vertical gradient of 1 in 150 of 1200 etc and so on.
View 3 Replies View RelatedI'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedI try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
Having problems with the spanning pipe labels in profile. Sometimes it works fine and others not at all. It will let me pick the two structures at each end and highlights the pipes, but then it will not let me pick the pipe to place the label on.
View 5 Replies View RelatedI have labled for grade break on the profile, but it did not lable all break line? how to add grade breaks along the new profile (see attached image).
View 1 Replies View RelatedI have C3D 2013 and recently my profile labels for sag and crest vertical curves are disappearing. When I first open the drawing and the program goes through loading I can see the labels but once it stops loading they disappear. All my levels are on, I have ran an audit several times, I have deleted the labels in the manager and replaced them but once I save and quit they are no longer visible. I am able to see the labels through an xref of the drawing but it appears that the labels have been reset to their default position and not where I had adjusted them to view them within the viewport. I have attached pictures of what it looks like.
View 9 Replies View Related