AutoCAD Civil 3D :: Profile Grade Break Labels?
Dec 30, 2013I have labled for grade break on the profile, but it did not lable all break line? how to add grade breaks along the new profile (see attached image).
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Filtering Grade Break Labels?
May 18, 2012I've got a drawing in which the existing ground is so jaggedy that I've got way too many grade breaks (see the attached image). I know I can use the weeding and eliminate the labels every 50 feet, or so, along the profile. But I need to have the ability to only show a specific grade break range. For instance, I'd like for my profile only to display grade breaks between 0% and 2% and not to display anything above 2%. I've tried making an expression, but have been hitting brick walls. I also know I can manually (use the CTRL + click) select the specific labels that I don't want and erase them, but I've got lots of these labels. Any LISP routine or an expression that can accomplish this? [URL]
View 9 Replies View RelatedAutoCAD Civil 3D :: Profile Grade Break Removal
Jan 6, 2013I was laying out a vertical curve in the roadway profile. I have a vertical curve of 100' in length, however immediately after that it shows a grade break. I do not want this grade break in my profile, I simply want a vertical curve with two grades on the left and right sides. How can I get 2009 C3D to remove the grade breaks? It would be very uncomfortable for someone to have to drive over these in the real world.
View 1 Replies View RelatedAutoCAD Civil 3D :: Grade Break Increments
Sep 13, 2013I have a profile set up with a surface an alignment and a Water Main. I would like to place grade breaks (Using Profile labels) every 100' along the surface however the increment field isn't available for grade breaks. Weeding doesn't work because it needs to be exactly every 100' I was thinking of creating an expression for it however I still haven't reached that level of expertise.
View 5 Replies View RelatedAutoCAD Civil 3D :: Defining Grade Break Criteria In Cross Section?
Feb 7, 2013I made a bunch of cross sections of an EG surface and want to define an elevation label at each significant grade break. I see an option to weed by distance but no option that would allow me to place a label at where the slope changes by more than a certain percent.
I found this old thread from three years ago and the best solution to come out of it was deleting individual labels.
[URL]
AutoCAD Civil 3D :: Shoulder Subassembly - Target Width Alignment At Grade Break
Nov 5, 2012I am trying to model a DOT project in a fashion that allows a corridor surface creation for not only the finished surface, but also the datum surface. This is a machine control project currently under construction. One of the DOT's typical sections includes a shoulder subassembly with a grade break in it. This particular assembly varies in width at the grade break. I would like to have the option for a target width alignment at the grade break.
See attached sketch.
AutoCAD Civil 3D :: Existing Elevation Labels At Datum And Top Grade Breaks?
Aug 28, 2012i created section view as in pic1. In Bands, Existing surface elevation labels at existing surface grade breaks, top of road elevation labels at top grade breaks, datum is the same. Can i add existing surface elevation labels at top of road grade breaks? (pic2)
View 7 Replies View RelatedAutoCAD Civil 3D :: Profile Grade Markers
May 22, 2013Why do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
AutoCAD Civil 3D :: Profile Grade Label Reset?
Nov 7, 2013i've got a profile with a lot of grade labels, some of which i've turned the visibiliy off. i need to turn some, but not al,l of them on.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD Civil 3D :: Label Grade In Line In Profile View
Jul 16, 2012I have a regular AutoCAD line in a profile view and wondered if there is a way of labeling the grade of the line. I'd think I could use and expression to calculate it. But I don't know how to automatically adjust for the vertical exaggeration without having to have a separate expression for all possible situations.
View 5 Replies View RelatedAutoCAD Civil 3D :: Maximum Hydraulic Grade Line In Profile Not Matching
Mar 13, 2013I am wondering why the maximum hydraulic gradline in my profile plot is not matching the maximum hydraulic grade levels reported in the report or excel spread sheets.
View 8 Replies View RelatedAutoCAD Civil 3D :: Labeling Centerline Existing Ground & Profile Grade Elevations?
Mar 28, 2012I am trying to label existing ground & profile grade on my cross-sections the way old Land 4 used to do it. I've muddled through section view property style settings, band settings, group properties w/no luck. It can't possible be this difficult. What am I missing?
View 5 Replies View RelatedAutoCAD Civil 3D :: Can't Review Profile Grade Info For Section Views Group
Aug 14, 2013Is it a bug ? I can add data, and I see it onto my section views but I cant view it again in the dialog. In example, I add a profile at 11 m. using markers and i see it. If I come back to the dialog to add or delete data related I see nothing....
View 3 Replies View RelatedAutoCAD Civil 3D :: Disappearing Profile Labels?
Jul 25, 2012acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
AutoCAD Civil 3D :: Profile Alignment Labels
Oct 4, 2012I would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?
View 1 Replies View RelatedAutoCAD Civil 3D :: Structure Labels In Profile?
Feb 12, 2013I would like to have the leader arrow attached to the rim of the structure in profile view. Now they are attached along the side of the structure well below the rim. This is for the dragged labels. How can I adjust the arrowhead attachment point?
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile View Vertical Labels
Feb 29, 2012How to "NOT" label the top elevation in a profile view? (see attached pic)
I can live with the far right and left vertical labels if I could turn the top elevation off.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
AutoCAD Civil 3D :: Spanning Pipe Labels In Profile
Dec 3, 2012Having problems with the spanning pipe labels in profile. Sometimes it works fine and others not at all. It will let me pick the two structures at each end and highlights the pipes, but then it will not let me pick the pipe to place the label on.
View 5 Replies View RelatedAutoCAD Civil 3D :: Pipe Labels In Profile View
Apr 25, 2012I click on my pipe in profile. Right click and add label. I see nothing, no label. All layers on and un-frozen.
View 6 Replies View RelatedAutoCAD Civil 3D :: Sag And Crest Profile Labels Keep Disappearing
Dec 18, 2012I have C3D 2013 and recently my profile labels for sag and crest vertical curves are disappearing. When I first open the drawing and the program goes through loading I can see the labels but once it stops loading they disappear. All my levels are on, I have ran an audit several times, I have deleted the labels in the manager and replaced them but once I save and quit they are no longer visible. I am able to see the labels through an xref of the drawing but it appears that the labels have been reset to their default position and not where I had adjusted them to view them within the viewport. I have attached pictures of what it looks like.
View 9 Replies View RelatedAutoCAD Civil 3D :: Vertical Curve Labels On Profile?
Jan 11, 2013I just created a profile by choosing my PVIs and linking them together with tangent curves. How do I add labels to show the vertical curve properties (K value, curve length, station of PVI, elevation of PVI...)? I'm guessing I have to edit the label style?
View 2 Replies View RelatedAutoCAD Civil 3D :: Profile Pipe Network Labels
Jun 19, 2013If I have a pipe that spans between two profile views, is there a way to label the pipe in each profile view with only the lineal feet that is showing in that profile view?
View 4 Replies View RelatedAutoCAD Civil 3D :: Profile View Band Labels
Apr 4, 2012Is there a way to get the ProfileBandLabelGroup labels from a profile view. I see I can get the ProfileViewBandItems, but don't see a way to convert it into the labels. I'm looking to override the text components. The code below does that, it's just getting the object without having to have the user select it.
ProfileBandLabelGroup labels = ssResult.ObjectId.GetObject(OpenMode.ForWrite) as ProfileBandLabelGroup;
LabelStyleTextComponent textComponent = labels.GetAt(0).GetTextComponentIds()[0].GetObject(OpenMode.ForRead) as LabelStyleTextComponent;
Autodesk.Civil.DatabaseServices.LabelGroupSubEntity label = labels.GetAt(0);
label.SetTextComponentOverride(textComponent.ObjectId, "blue");
AutoCAD Civil 3D :: Profile View Station Labels
May 23, 2012I have a profile view created with several surfaces including a proposed surface. The stationing on the X-Axis of the profile view corresponds correctly with the PT's, PC's etc on the proposed surface profile, however the the labels that are actually on the profile line are giving me values such as PC: 0+668.62 when it should read 21+93.63.
I can't seem to find a correlation in the two numbers and am having difficulty changing the style to correctly reflect the stationing.
AutoCAD Civil 3D :: Manhole Profile Labels Disappear
Dec 4, 2013I have my design drawing referenced into another drawing for plan and profile sheets. I made some changes to my pipe network in my design drawing, and my manhole profile labels disappeared in my sheet drawing!
The manhole labels in plan view stayed where they were, and updated with the changes I made. The profile labels just disappeared.
AutoCAD Civil 3D :: Moving Profile View Labels With The Profile View?
Jul 20, 2012I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
AutoCAD Civil 3D :: Profile Labels For Curb - Rounding Error
Apr 4, 2012We sre doing 3 line profiles for a road and the left and right curb should be .13' lower than the centerline elevation. In many cases we are getting .14' or sometimes more or less. We tried resampling the cooridor with a tighter interval but still the same results.
View 9 Replies View RelatedAutoCAD Civil 3D :: Missing Profile View Band Labels
Jan 20, 2010I cannot for the life of me get the start and end labels for any band to display within a profile view. Each band has the 'label start' and 'label end' labels ticked and the major/minor labels display at every other point but don't display anything at the start of the view or end. The profile views are taken from a simple straight alignment and the profiles themselves extend the full length of the view.
View 9 Replies View RelatedAutoCAD Civil 3D :: Profile Band Labels Keep Disappearing And Won't Plot
Aug 13, 2012I am running CV3D 2011 on a Windows 7 64 bit workstation. I have a road profile that has a band which labels the existing and proposed profile elevations. For some reason the profile band labels (including the stations) randomly disappear and all you see is the band box. If you REgen they will reappear but will dissapear again when you plot preview and they WON"T plot...even though they are there in the drawing!
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
AutoCAD Civil 3D :: Profile Band - Spanning Pipe Labels
Mar 30, 2012I was looking at placing pipe information into a Profile Band. I see that I can include the following properties in a pipe label in the profile band:
<[Total Slope Across Span(FP|P2|RN|AP|GC|UN|Sn|OF)]>
<[Number of Pipes in Span(GC|UN|Sn)]>
<[Drop Across Span(Um|P2|RN|AP|GC|UN|Sn|OF)]>
Only problem is they don't actually give me the information of a spanning pipe, only a single pipe. I see no way of choosing which pipes will be spanned. Am i missing something in the creation of the profile band that allows me to choose the spanning pipes or is this broken?
AutoCAD Civil 3D :: Adding Profile Elevations To Alignment Labels
May 10, 2010Is there a way in C3D to add elevation information from a profile to an alignment label? What I'm trying to do is add labels to an alignment in a plan view with elevation information from a profile design associated with that alignment at a particular station. For example, the note would read:
ALIGNMENT B
STA: 12+83.67
ELEV: 435.87
I can't figure out how to add any elevation data to the alignment note. I really don't want to have to create a section and a corridor surface, but that's the only way I can think of right now... and I'm not sure that would actually let me add a station and elevation in the same note in a plan view.
