i've got a profile with a lot of grade labels, some of which i've turned the visibiliy off. i need to turn some, but not al,l of them on.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have a regular AutoCAD line in a profile view and wondered if there is a way of labeling the grade of the line. I'd think I could use and expression to calculate it. But I don't know how to automatically adjust for the vertical exaggeration without having to have a separate expression for all possible situations.
View 5 Replies View RelatedHow I could create a label for the curb return grade as shown on the attached file. The label is on a curve.
View 6 Replies View RelatedWhy do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
I was laying out a vertical curve in the roadway profile. I have a vertical curve of 100' in length, however immediately after that it shows a grade break. I do not want this grade break in my profile, I simply want a vertical curve with two grades on the left and right sides. How can I get 2009 C3D to remove the grade breaks? It would be very uncomfortable for someone to have to drive over these in the real world.
View 1 Replies View RelatedI have labled for grade break on the profile, but it did not lable all break line? how to add grade breaks along the new profile (see attached image).
View 1 Replies View RelatedI am wondering why the maximum hydraulic gradline in my profile plot is not matching the maximum hydraulic grade levels reported in the report or excel spread sheets.
View 8 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
I am trying to label existing ground & profile grade on my cross-sections the way old Land 4 used to do it. I've muddled through section view property style settings, band settings, group properties w/no luck. It can't possible be this difficult. What am I missing?
View 5 Replies View RelatedIs it a bug ? I can add data, and I see it onto my section views but I cant view it again in the dialog. In example, I add a profile at 11 m. using markers and i see it. If I come back to the dialog to add or delete data related I see nothing....
View 3 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedI am using Civil 3D 2009 version 4.
I have designed a railroad yard that the construction plans require all grading to be to centerline of rail (0.5 feet under the ties) and my profiles are required to be to the top of rail (1.3 feet above the centerline elevation). Since I already have the grading surface done I was hoping there was a way to target my grading surface and add the 1.3 feet to the elevation in the label. Is that passable?
Using the stock 'Elevations and Stations' style I targeted the existing ground for profile 1 and the finished ground for profile 2. Then I tried using the language you enter at the command line to do math in the label (+ 1.3 <[Profile2 Elevation(Uft|P2|RN|AP|Sn|OF)]>) but that only generated a label that read "(+ 1.3 242.00)" instead of the "243.30" that I need for the loading area, for example.
AutoCAD Civil 3D 2012 (Primary), 2011 by contract.
Dell Percision T3500: MS Windows 7 64-bit SP1; Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
Is there a way to insert a jog into a profile label?
View 9 Replies View RelatedI'm trying to label the beginning and end points of a design profile (yellow line in the attached image) using the Horizontal Geometry Station Label tool. For some reason they will not show up.
View 1 Replies View RelatedI would like to add a wipeout to this structure label so I don't see the profile view grid lines. I want the wipeout to be the exact width and height of the label. I have tried numerous edits but can't seem to get it. What is the easiest/best way to add this wipeout?
View 9 Replies View RelatedI need to know how to display a proposed profile elevation in the major station alignment label, I mean, for example, I want to read in the label "0+000, 494.444". I've already edited my major station label style adding a (profile type) Reference text, and it only displays "?". I suppose I need to associate it with the correct profile, but I've not figured out how to. I show you how the label looks in the attached image.
View 8 Replies View RelatedI am trying to create a label for fire hydrants in plan view that shows the flange elevation. I want the elevation to be 0.4' above the adjacent road profile. I added a reference text component to my label style that shows the profile elevation. Where would I find the expression for the profile elevation reference text?
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
Here is my expression:
IF((FMOD({Raw Station}+5,15))!=0,-1,({Profile Elevation}-100*FLOOR({Profile Elevation}/100)))
I have also tried it without a pair of brackets:
IF((FMOD({Raw Station}+5,15))!=0,-1,{Profile Elevation}-100*FLOOR({Profile Elevation}/100))
and I have tried it using {Station Value} instead of {Raw Station}
Here's what it's meant to do (because it's a long one):
If the station value + 5 is not divisible by 15, return -1
If the station value + 5 is divisible by 15, return the profile elevation,
if the profile elevation is in the 100 range, subtract 100
if the profile elevation is in the 200 range, subtract 200...etc
Here is my conundrum: If I use the expression in a profile label, it works fine. But if I use it in an alignment label as reference text, it returns -1 for every value.
I have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is ??? for the value. I am currently running Civil 3D 2012.
IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}
I can label the superimposed profile but c3d uses the stations of main profile of profile view.
Thinking on the future.... c3D can have the ability of use superelevation values to calculate the right values of superimposed profiles ?
So I've got a collection of the LabelGroupSubEntity in the ProfileDataBandLabelGroup. I need to replace some values inside them based on what Vertical Geometry Point they are labeling. Is there an easy way to determine what station value it is labeling?
View 2 Replies View RelatedCivil 3D 2013, SP2
Settings > Pipe Network > Right Click > Edit Feature Settings > Default Profile Label Placement, gets you to this point:
Does the highlighted line only apply at the time that the label is placed? I have multiple sewers to label and I want to each set of labels at a different elevation. Changing this default will have NO effect on existing labels?
how to create a label style for design center of road (simple tangent) in profile that will work between multiple profile views. I've used the 'Create Multiple Views' profile view wizard. I use a horizontal dimension style label for CL road (looks just like an autocad linear dimension). I'd like the label work across separate views i.e. stop at view end, pick back up at view start.
The label I currently use is simply a line component from tangent start dimension to tangent end dimension and the text component is anchored to the line midpoint. Label looks as intended for normal use. For some reason the line drops as if looking for the actual pvi at the right side when i use multiple views.
Is there any way to allow user input in an expression for a profile label?
View 5 Replies View RelatedI have two files...
File 1: with a Profile View => Units set to Meters and Scale set to 1:100
File 2: Units set to Milimeters, Model Space Scale set to 1:100 (same as File 1), Viewport Scale set to 1:100 , Plot style scale set to 1:1
Now I want to X-Ref the "File 1" into "File 2" but when I do that, Civ3D scales all the Profile Labels to huge size. I understand, it has to do with different units (meters and millimeters) set in both file... but thats the way I want this to be...
Please note, in File 2: Model Space scale 1:100 is different than Viewport Scale 1:100, because Model Space scale 1:100 is coming from "File 1" which is set to Meters.
I even tried to keep both Model Space Scale and Viewport Scale same in "File 2" but that didn' work either.
A method (possible expressions) to create a profile view label that can reference pipe or structure data?
View 5 Replies View RelatedI have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is? for the value. I am currently running Civil 3D 2012.
IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}
For composing a profile label, I can't find the option for Geometry Point Text, which would use our abbreviations under the drawing settings. It is available for alignments but not profiles. Currently have it text compenent being labeled with PVC and PVT, but I had typed that in.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
What can I do to show intersection information in a profile label?I mean, supose I have two roads (A and B)... what should I do to show in the road A vertical profile the name and the station of road B in the properly position of this A profile? URL....
View 4 Replies View Related