I am wondering why the maximum hydraulic gradline in my profile plot is not matching the maximum hydraulic grade levels reported in the report or excel spread sheets.
View 8 RepliesI have a regular AutoCAD line in a profile view and wondered if there is a way of labeling the grade of the line. I'd think I could use and expression to calculate it. But I don't know how to automatically adjust for the vertical exaggeration without having to have a separate expression for all possible situations.
View 5 Replies View RelatedWhy do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
I was laying out a vertical curve in the roadway profile. I have a vertical curve of 100' in length, however immediately after that it shows a grade break. I do not want this grade break in my profile, I simply want a vertical curve with two grades on the left and right sides. How can I get 2009 C3D to remove the grade breaks? It would be very uncomfortable for someone to have to drive over these in the real world.
View 1 Replies View Relatedi've got a profile with a lot of grade labels, some of which i've turned the visibiliy off. i need to turn some, but not al,l of them on.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have labled for grade break on the profile, but it did not lable all break line? how to add grade breaks along the new profile (see attached image).
View 1 Replies View RelatedI am trying to label existing ground & profile grade on my cross-sections the way old Land 4 used to do it. I've muddled through section view property style settings, band settings, group properties w/no luck. It can't possible be this difficult. What am I missing?
View 5 Replies View RelatedIs it a bug ? I can add data, and I see it onto my section views but I cant view it again in the dialog. In example, I add a profile at 11 m. using markers and i see it. If I come back to the dialog to add or delete data related I see nothing....
View 3 Replies View Relatedi have a corridor. the corridor feature line that is supposed to hit the proposed centerline is following my existing grade instead of where the profile is. in other words, the corridor line i need at the centerline when i do "feature lines from corridor" is following my existing grade instead of the top of my road. did i accid. change something? i need it to follow the top centerline of my road. the red arrow is the line i need at the top centerline.
View 3 Replies View RelatedI was wondering if there is a way that I can take an existing grade surface and apply a designed pond surface.
Right now I have the pond as a set of 3d Polylines in the proper geometry.
I want to place the pond into this surface and cut/fill at a 3:1 from that pond to the existing surface.
We are working on a road widening scheme where one edge of the road is retained as far as possible while other edge being widened. I like to design a retained channel line by extending the cross fall between the existing center line and the exiting channel line on to the design one.
It is possible in civil 3d to extend the gradient between two feature lines at some offset from reference feature line?
I'm looking for a way to add a marker with location & elevation data to the profile (not the bands).
Only mention i found in this forum was for civil2011 (i have 2013) and it is no longer available.
I had thought this would work with no problem. I know the elevation I need to start an arc at and an elevation at a point along the arc. I drew that portion of the arc and then extended the arc to a line where I need the arc to end. I had expected the arc to extend along it's current grade the way a straight Feature line would. But the end dropped to 0.
I undid the extension, listed the FL arc to get the grade, extended it again and used the Elevation Editor to set the previous grade. But why didn't the extension work? I checked for other FL in the site that might cause this but there were none.
C3D 2012
I want to set and Elevation Point (not a PI Point) along a feature line by entering the grade from the previous point. Currently the "Set Elevation Point" command only allows entering an elevations or getting an elevation from the surface. I know I can set an elevation point and then use the "quick elevation editor" to adjust the grade, but I don't want to go through the extra step.
I have a problem of getting exact numbers on my civil 3D. I have a line of 900 feet. I create a line of hundred feet. But when I create and alignment, I get 108+00 and length of 10800 feet.
View 3 Replies View RelatedThe intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
I seem to be having trouble changing the lineweight of my profile line. I have changed the line weight in the layer properties, in the Profile properties and tried changed the line weight in the pen style. Everywhere I could think I try to make the line thicker but when I plot, the line is still the same and difficult to distinguish from the grid blocks of the profile view.
View 3 Replies View RelatedI am currently working with frame generator, and I have created a structure family of extruded aluminum profiles. I have a problem, and it's like to limit the length of the profiles up to 6 meters. When I insert the profile in a structure of 7 meters of length, Inventor should segment the profile in a profile of 6 meters + 1 profile 1 meter, as the maximum length of the profile should be 6 meters.
View 1 Replies View RelatedI have a profile view with the existing ground profile shown. The alignment the profile is referencing was stretched at the front and now the profile markers do not line up with the profile line. The profile line updated as it should have, but the markers did not.
See attached screen shot.
I'm doing a road project. i've got profile grades of existing left and right ditches. in some sections we're redoing the ditches so i've got proposed left and right ditch profiles. what i want to show is where i've got proposed ditch grades, i don't want to show existing ditch grades.
The new ditches happen intermittently on the road so i would need to be able to turn off the existing ditches at various places. is this possible without exploding my existing ditch grades?
I have a roadway alignment with FG profile and I want to place a feature line on the roadway centerline that represents the FG profile elevations.
View 7 Replies View Relatedis there a way to draw a line in the profile view and create that line into a feature line? and if there is can i project that line into the plan? i know that you can make a feature line in the plan and project that feature line into a profile view, just wondering if you could basicly do the reverse. i don't want to make a coridor.
View 4 Replies View Relatedwe use three line road profiles. If there is a bus pullout or lane transition we show the curb profile based on centerline stationing. I'm able to generate a the corridor using a transition lane assembly from centerline and targeting a widened offset alignment or just a feature line. I can import the corridor curb feature line into a profile which would be a perfect solution, but it is all truncated. (i.e. no vertical curves) I can create a profile of the offset alignment, but the stationing doesn't match centerline.
How can I either generate a non trunidicated profile from the corridor for my curb profiles? How can create a design profile of a transition/pullout curb line that I can target and plot against centerline stationing?
I HAVE A 2D PROFILE (DWG FILE NOT CIVIL3D FILE) of a pipeline that shows invert of the pipe.
I want to have this pipe as feature line .
is there any way to convert this profile to feature line?
How can I access the hydraulic data from pipes through VBA? Is it possible? I couldn't find this information in the pipes object...
Using Building Design Suite Ultimate 2014
We are being requested by more municipalities to perform a hydraulic analysis on the water system before we can extend water to the site. This is very crude doing it by hand. I have seen different softwares available that run inside of Civil 3D that will perform the hydraulic analysis. How others were performing hydraulic analysis.
View 1 Replies View Relatedhow can i do hydraulic calculation for pressured pipes using autocad civil 3d or by using any other autodesk application or extension
View 2 Replies View RelatedI want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
I have cut a ground line in profile view. Is there a way to "mask out" a portion of the ground line in the profile? I need to detail some stair but the surveyors only shot the top and bottom tread. I don't want to add points to the surface, I just want to draw the steps in and place them in the correct profile location. And I don't want two horizontal alignments.
View 7 Replies View RelatedC3D 2013, Win 7, 64 bit
When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment. I made sure I selected the correct profile, and I even deleted all other surface profiles just in case. But it still gives me a wonky feature line for the entire alignment.
However, in the same file, other profiles have worked perfectly.