AutoCAD Civil 3D :: Convert Profile To Feature Line

Sep 24, 2013

I  HAVE A 2D PROFILE (DWG FILE NOT CIVIL3D FILE) of a pipeline that shows invert of the pipe.

I want to have this pipe as feature line .

is there any way to convert this profile to feature line?

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Convert (scanned Plan And Profile) For Pipeline To Feature Line

Aug 13, 2013

I have a 2D (dwg)  plan and profile of  pipeline ( Scanned) and I am going to find a way to have this pipe as 3d ( or featureline).

I can't do this manually because this is a long pipe.

View 3 Replies View Related

AutoCAD Civil 3D :: Feature Line From Profile?

Mar 1, 2013

I have a roadway alignment with FG profile and I want to place a feature line on the roadway centerline that represents the FG profile elevations. 

View 7 Replies View Related

AutoCAD Civil 3D :: How To Create Feature Line From Profile

Jul 15, 2013

is there a way to draw a line in the profile view and create that line into a feature line? and if there is can i project that line into the plan? i know that you can make a feature line in the plan and project that feature line into a profile view, just wondering if you could basicly do the reverse. i don't want to make a coridor.

View 4 Replies View Related

AutoCAD Civil 3D :: Create Profile Layout From Feature Line

Oct 4, 2012

I want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.

This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.

I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?

View 3 Replies View Related

AutoCAD Civil 3D :: Create Feature Line From Alignment / Profile?

Oct 25, 2013

C3D 2013, Win 7, 64 bit

When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment.  I made sure I selected the correct profile, and I even deleted all other surface profiles just in case.  But it still gives me a wonky feature line for the entire alignment.

However, in the same file, other profiles have worked perfectly. 

View 8 Replies View Related

AutoCAD Civil 3D :: Convert A Feature Line To A 3d Polyline?

Jul 13, 2011

Feature lines are easy to make and great for grading.  However, when I try to save the drawing into *.dxf, all the feature lines disappeared. Does this mean DXF files do not take feature lines?

I need the DXF files to up load into GPS.  Do I have to redraw everything in 3D polyline?Or is there an easier way to convert feature lines into 3D polylines?

View 9 Replies View Related

AutoCAD Civil 3D :: Project One Feature Line To Section Group Or Profile?

Aug 29, 2012

Is there a way to project just one feature line (or anything appropiate...polyline, 3d poly etc) into the sections group or profiles ?

The thing is that Projection tool, labels everything that's a Block, Point, 3d poly ...etc to the sections group.

And it puts all labels in the same layer.

My project theme requires to project forest limit on every section. This is appearing on the survey as a polyline along the road. Civil Engineer / Infrastructure of metropolitan transports [URL]

View 4 Replies View Related

AutoCAD Civil 3D :: How To Edit Feature Line Elevations In Profile View

Sep 26, 2013

I have a finished grade surface and I have a feature line that is my waterline. I created an alignment and then recreated my feature line so they would be linked. I can then create a profile using my alignment and that shows my surface at that alignment. I can even add the waterline by using project objects to profile view. 

I need to be able to edit the feature line elevations in the profile view by creating and erasing PVIs so this will tie back to my geometry.

AutoCAD Civil 3D 2012 SP4
Windows 7 (64)

View 9 Replies View Related

AutoCAD Civil 3D :: Convert Feature Line Elevation Point To PI

Nov 6, 2013

Is there a way to convert a feature line elevation point to PI?

My objective here is to delete all the elevation points except one. It would be time consuming to pick each elevation point and delete them individually (in this case there are about 15 but sometimes there are more). I want to use the delete all option but keep one one of them. If I can convert that one into a PI I could then quickly delete the remaining elevation points.

View 4 Replies View Related

AutoCAD Civil 3D :: Convert Polyline To Feature Line For Use In Grading

Aug 22, 2012

I'm working on crane pads for a windfarm development and have run into an issue that has never happened in the other 60 or so ones I've done previously.

I have a polyline (elevation added in via Properties) that I want to convert to a feature line for use in grading but when I try to convert I get the message below

When I check the properties and do a LIST the list reports a negative elevation.

View 3 Replies View Related

AutoCAD Civil 3D :: Convert Figure To Feature Line - Export Survey Figures To Genio?

Sep 12, 2013

I have a client who uses Bently MX Roads for road design and requires that survey data be supplied in GENIO format. I realise that there are many possible options to get Civil3D survey data into MX, but I am trying to explore the use of the Subscription Extension to Import/Export GENIO.

Surfaces - no problem. Points - I see how I can get that to work. But the only linework that can be exported is Feature Lines, and it is also important that the feature lines have a name (likely related to the layer it is on).

I can convert survey figures to feature lines and name them one by one but would be very time consuming for a whole survey. Is there any way of doing all figures at once?

I'm guessing not and that it is probably easier to do the Genio creation from dwg in MX itself.

Civil3D 2014 - Windows7 64bit

View 1 Replies View Related

Photoshop :: Epson Scan's Color Configurations Convert Profile Feature

Jun 2, 2012

I read the Photoshop Windows (read only) thread, titled "Scanning old photos", at [URL]......... I found Robert Shomler's answer useful, even though I am using an i Mac. 
 
I have been using Epson Scan Version 3.01A and the Epson Perfection 4490 Photo scanner to scan reflective photos for over three years. I started using Adobe Creative Suite 6 Design Standard, and Photoshop for the first time, last month. My iMac is about one year old, and System Preferences shows its Display profile as i Mac.  
 
I am befuddled by Epson Scan Version 3.01A's Color Configuration settings. I believe that I've been using the default Color Control, Continuous auto exposure setting for all these years, accept that I apparently changed Display Gamma from the default of 1.8 to 2.2. 
 
I tested scanning the same originals with both the Color Control setting, and the ColorSync, Epson Standard, Target sRGB setting, as TIFF's. The resulting TIFF's look radically different in color, when displayed with Preview and Photoshop. The images resulting from the ColorSync, Epson Standard, Target sRGB setting more closely resemble the originals, except they appear to be a little flat. 
 
At the moment, I have the Photoshop color working space at sRGB IEC 61966 2.1. When I open one of the scans done at the Color Control setting, select Assign profile sRGB IEC 61966 2.1, and check "…convert document to working RGB", I don't see any change in the color. The color does not change to look like the scans done directly to sRGB IEC 61966 2.1. Is that right? 
 
I notice there is also an option to Assign profile Epson Perfection4490 - reflective. When I try this, the color changes to something different from both of the aforementioned test results.

View 11 Replies View Related

AutoCAD Civil 3D :: Remove Feature Line Used As Break Line When Creating Surface

Dec 11, 2012

I needed to remove a feature line that I used as a break line when creating a surface.   When I removed the feature line from the definition of the surface, the grading did not change.  It appears the points created by the feature line remain which is why grading didn't change.  The only work around was to delete these points. 

I noticed the same thing happens when I removed the surface boundary and inserted a new boundary.  why these points remain and how to remove when I delete boundary and feature line from surface?

View 9 Replies View Related

AutoCAD Civil 3D :: Create Dynamic EOP Profile Based On Cross Slope From Center Line Profile

Jun 28, 2012

The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline.  Well the intersection tool doesn't always work with funky intersection layouts.  Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?

Civil 3D 2012
Windows 7, 64 bit

View 1 Replies View Related

AutoCAD Civil 3D :: Superimpose Corridor Feature Profile

Mar 14, 2012

Is there any way to do that (workaround method).

View 3 Replies View Related

AutoCAD Civil 3D :: Feature Lines And Plan / Profile Sheets

Apr 17, 2012

I have a low pressure sewer system that runs along a road side but is not always parallel to the road.  I'm using hte centerline of the road for my alignment.  What I need to do is have a profile of the existing ground above the centerline of the pressure pipes show in the plan/profile sheets.  I do not need a profile of the roadway.

I'm currently using feature lines to accomplish this and that works fine in the main drawing, however, the profiles I create there don't transfer to the plan/profile sheets when I create them.  The only way I have found so far to get thoe profiles to show in the plan/profile sheets is to create the feature lines in the plan/profile drawing and project those lines to my profile view.  This is a fairly large system so I will have numerous plan/profile sheets.  Creating the feature lines and profiles in the individual sheets is fairly time consuming.

I'm currently using Civil 3D 2012.  I realize that with the addition of pressure pipe networks in 2013 might very well give me the tools I need but I'm at a point in this project, and our office, where switching to 2013 isn't really an option yet.  However, if that is my answer then I will have to consider that.

View 6 Replies View Related

AutoCAD Civil 3D :: Slope Labels For Feature Lines Projected To Profile

Sep 21, 2011

C3D2011

Say you have a feature line in plan view and you project it to profile view. Is there a way to label the true slope of the projected feature line segments in profile?

The profile view depth labels are not accurate since it's simply calculating the length from station to station in profile.

...and of course this does not correspond to the true segment length since the feature line is not parallel to the alignment.

View 9 Replies View Related

AutoCAD Civil 3D :: Change Line Weight Of Profile Line

Jul 6, 2013

I seem to be having trouble changing the lineweight of my profile line.  I have changed the line weight in the layer properties, in the Profile properties and tried changed the line weight in the pen style.  Everywhere I could think I try to make the line thicker but when I plot, the line is still the same and difficult to distinguish from the grid blocks of the profile view.

View 3 Replies View Related

AutoCAD Civil 3D :: Feature Line Projection

Sep 26, 2013

Is there any way to project feature lines into a profile when the plan view is xref'd? I have my plan view "existing topo" with all existing features/Figures and a existing surface.

My profile is a separate dwg with plan view xref'd and surface a data shortcut. Of course there are feature lines and Survey Figures in the existing top I want to project into the profile, but can't because it is an xref. Besides copying .

View 1 Replies View Related

AutoCAD Civil 3D :: Using Feature Line Method?

Oct 31, 2013

C3D 2012.  I am trying to get the distance from the start of a featrue line to a selected point.  My object is "FLobj" and my Point is PT1.  I am using the method Get2dDistanceAtPoint.  This is the line of code.

(vlax-invoke-method FLObj 'Get2DDistanceAtPoint pt1 'pDistance)

I keep getting "too many actual parameters". 

View 2 Replies View Related

AutoCAD Civil 3D :: Feature Line Name To Label?

May 19, 2013

I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.

how to add the name into a label style?

View 4 Replies View Related

AutoCAD Civil 3D :: Can Decurve A Feature Line

Jul 11, 2007

Is there a way to decurve feature lines like how we do it with polylines? I am labeling my feature lines but don't want the curve labels to show up

View 6 Replies View Related

AutoCAD Civil 3D :: Arc Or Feature Line As Breaklines

Jan 7, 2014

I am building a surface and have back of curb, curb face, and curb flowline going around a curve.  I cannot create the lines with the usual pline as they will cross due to poor field collect.  I created the curbs with multiple arcs.  I was then going to change them into Feature Lines and am wondering if I can then use them as breaklines in a surface. 

View 1 Replies View Related

AutoCAD Civil 3D :: Feature Line Styles

Apr 11, 2012

We have cooridors with features such as terrace drains and flowlines, but we cant seem to get the linetypes to show up correctly.  For example a flow line should have arrows but it shows up without the linetype and looks continuous. 

LTSCALE =1
MSLTSCALE=1
PSTSCALE=1
DRAWING SETTINGS - 1"=40'
CIVIL 3D 2012

View 3 Replies View Related

AutoCAD Civil 3D :: Corridor Feature Line

Jan 7, 2014

I am building a corridor with the right side of the pavement fitting to the existing surface.The subassembly used to link the edge of pavement to the existing ground is LinkSlopeToSurface.

On the corridor created, the feature line (code P2) of the corridor surface (top) starts from the station 0+025, instead of 0+000.

I was wondering why there is no feature line P2 for station range 0+000 to 0+025? Does that mean the linkage to the existing ground surface not exist for the slope defined in the subassembly?

View 2 Replies View Related

AutoCAD Civil 3D :: Feature Line Elevations

Mar 25, 2013

We are running Civil3d 2012. When converting a line or 3d poly to feature line, or just creating one it adds elevation points where it crosses surface breaklines even if you do not assign elevations. We want the feature to just have 2 elevations. The beginning and end. Is this a bug? Or is there another setting somewhere?

View 7 Replies View Related

AutoCAD Civil 3D :: Tie Feature Line To Surface

Sep 4, 2013

I created a label for retaining wall that takes the z value from the start and end of a feature line. Works great except that it isn't dynamic. I have created the feature line in a grading sheet where the surface is data shortcut into it and I'm just using grips to make sure the ends are on the bottom and top of the retaining wall. Is there any way to dynamically pin/tie the feature line to a surface that has been data shortcut?

View 9 Replies View Related

AutoCAD Civil 3D :: 2012 Feature Line Crashes?

Apr 6, 2012

AutoCAD C3D 2012 has been crashing nonstop over the past 3 days on me whenever I try to "Create a Feature Line from Object".  I know that it is a localized problem as a co-worker has been in the same drawing and done grading work without any problems.  The error has occurred in multiple drawings. 

Product Version: F.107.0.0. AutoCAD Civil 3D 2012 SP1

View 3 Replies View Related

AutoCAD Civil 3D :: Can't Edit Elevations Of Feature Line

Apr 19, 2012

I Created a Feature Line from Objects (a polyline).  I added it to Site 1, gave it a name, layer.  Do I Assign elevations during creation (conversion options)?

I set the Elevation to 8.5  (NOT From surface)

Then I go to

Modify Feature Line -

Elevation Editor.

Why are the elevations locked?  I want to set them.

View 6 Replies View Related

AutoCAD Civil 3D :: Feature Line Edits Jump Across

Oct 15, 2013

Why do they do this? I am trying to quick elevation edit a featureline but my edit glyph jumps to a completly different featureline that is near.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved