AutoCAD Civil 3D :: Project One Feature Line To Section Group Or Profile?
Aug 29, 2012
Is there a way to project just one feature line (or anything appropiate...polyline, 3d poly etc) into the sections group or profiles ?
The thing is that Projection tool, labels everything that's a Block, Point, 3d poly ...etc to the sections group.
And it puts all labels in the same layer.
My project theme requires to project forest limit on every section. This is appearing on the survey as a polyline along the road. Civil Engineer / Infrastructure of metropolitan transports [URL]
View 4 Replies
ADVERTISEMENT
Apr 12, 2012
Project objects to profile view... got it. No problems selecting individual survey points or survey figures and projecting to profile view. Is there a way to project a entire point group to a profile. I have a point group created for the large number of points to be projected. Next I right click on the point group and click "select'. Then go to Project objects to profile view. Nothing...
This process works for the survey figures, but not the point groups! In prospector tab go to survey > figures then select CTRL + each figure to project then VIOLA' the whole group of figures are projected.
Is this limited to graphical selections only? If so, is there a workaround to generate a graphical selection set from the point group.
Using C3D 2010 on Win 32bit platform
View 1 Replies
View Related
Aug 14, 2013
Is it a bug ? I can add data, and I see it onto my section views but I cant view it again in the dialog. In example, I add a profile at 11 m. using markers and i see it. If I come back to the dialog to add or delete data related I see nothing....
View 3 Replies
View Related
Oct 22, 2012
I have a complex grading situation with a sewer near a drainage channel. Long story short.... I need to somehow look at my alignment section by section and try to establish a feature line that will represent my proposed top of slope. There are a ton of different constraints that I will not go into. My ultimate need is the ability to establish a feature line or 3d pline from the section view. I know that this is somehow possible via corridors. Im working with just an aligment and cross sections at every 25 feet. Is this possible?
View 3 Replies
View Related
Mar 1, 2013
I have a roadway alignment with FG profile and I want to place a feature line on the roadway centerline that represents the FG profile elevations.
View 7 Replies
View Related
Jun 26, 2013
How can I project a right of way line into a cross section.
View 1 Replies
View Related
Jul 15, 2013
is there a way to draw a line in the profile view and create that line into a feature line? and if there is can i project that line into the plan? i know that you can make a feature line in the plan and project that feature line into a profile view, just wondering if you could basicly do the reverse. i don't want to make a coridor.
View 4 Replies
View Related
Sep 24, 2013
I HAVE A 2D PROFILE (DWG FILE NOT CIVIL3D FILE) of a pipeline that shows invert of the pipe.
I want to have this pipe as feature line .
is there any way to convert this profile to feature line?
View 1 Replies
View Related
Oct 4, 2012
I want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
View 3 Replies
View Related
Oct 25, 2013
C3D 2013, Win 7, 64 bit
When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment. I made sure I selected the correct profile, and I even deleted all other surface profiles just in case. But it still gives me a wonky feature line for the entire alignment.
However, in the same file, other profiles have worked perfectly.
View 8 Replies
View Related
Sep 26, 2013
I have a finished grade surface and I have a feature line that is my waterline. I created an alignment and then recreated my feature line so they would be linked. I can then create a profile using my alignment and that shows my surface at that alignment. I can even add the waterline by using project objects to profile view.
I need to be able to edit the feature line elevations in the profile view by creating and erasing PVIs so this will tie back to my geometry.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 9 Replies
View Related
Aug 13, 2013
I have a 2D (dwg) plan and profile of pipeline ( Scanned) and I am going to find a way to have this pipe as 3d ( or featureline).
I can't do this manually because this is a long pipe.
View 3 Replies
View Related
Jul 17, 2013
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Mar 26, 2012
C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
View 1 Replies
View Related
Apr 29, 2012
In the Multi-Section Creation tool i couldn't find a way to edit or remove Grid Break Labels ,aslo after creation i could Edit it each indvidual Section but not allover all Sections ?
How i can Editit ? also how ican do soin creation And why do i feel that the 2012 is Different from 2010 ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 2 Replies
View Related
Sep 5, 2013
I have multiple alignments. When I create a section view group I would like a label at the top or bottom that is the alignment name. I cant find this option and I'm certain it exists!
View 6 Replies
View Related
Nov 7, 2012
C3D 2012
Is it possible, in c# code, to add a sectionview to a section view group?
View 2 Replies
View Related
Dec 11, 2012
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
View 9 Replies
View Related
Mar 19, 2012
I'm using feature lines created from utilities line work to label utility locations on section views. To avoid selecting each individual section view, I'm using Profile & Section Views, Section views, Project Objects To Multiple Section Views. This works great. Labels are placed on the Sections Views all at once, just requiring a little clean up of label locations. However, there are feature lines for other purposes in the drawing, and these are all labeled at the same time. Any way to select which feature lines will be projected? I've been erasing the extra labels, which is still faster then placing one label at a time per section view.
Win 7 64BIT
C3D 2013
View 6 Replies
View Related
Jun 28, 2012
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
View 1 Replies
View Related
Apr 7, 2012
So I've got a collection of the LabelGroupSubEntity in the ProfileDataBandLabelGroup. I need to replace some values inside them based on what Vertical Geometry Point they are labeling. Is there an easy way to determine what station value it is labeling?
View 2 Replies
View Related
Mar 14, 2012
Is there any way to do that (workaround method).
View 3 Replies
View Related
Oct 25, 2012
I am using C3D 2012. I my drawing I have 3D solid objects that I want projected into my roadway x-sections. When I use the menu command to "project objects to section views" and select "solids" I get the message "no objects to project". Are their different types of solid objects in autocad?
View 9 Replies
View Related
Jun 13, 2013
The new features in 2014 does not work. I can project solids to a section view but not to multiple section views.
View 1 Replies
View Related
Apr 17, 2012
I have a low pressure sewer system that runs along a road side but is not always parallel to the road. I'm using hte centerline of the road for my alignment. What I need to do is have a profile of the existing ground above the centerline of the pressure pipes show in the plan/profile sheets. I do not need a profile of the roadway.
I'm currently using feature lines to accomplish this and that works fine in the main drawing, however, the profiles I create there don't transfer to the plan/profile sheets when I create them. The only way I have found so far to get thoe profiles to show in the plan/profile sheets is to create the feature lines in the plan/profile drawing and project those lines to my profile view. This is a fairly large system so I will have numerous plan/profile sheets. Creating the feature lines and profiles in the individual sheets is fairly time consuming.
I'm currently using Civil 3D 2012. I realize that with the addition of pressure pipe networks in 2013 might very well give me the tools I need but I'm at a point in this project, and our office, where switching to 2013 isn't really an option yet. However, if that is my answer then I will have to consider that.
View 6 Replies
View Related
Jul 13, 2012
I want to change my elevations color to green and the other one to yelow. I can't not find this option. I using 3D 2011.
View 1 Replies
View Related
Sep 21, 2011
C3D2011
Say you have a feature line in plan view and you project it to profile view. Is there a way to label the true slope of the projected feature line segments in profile?
The profile view depth labels are not accurate since it's simply calculating the length from station to station in profile.
...and of course this does not correspond to the true segment length since the feature line is not parallel to the alignment.
View 9 Replies
View Related
Oct 15, 2013
I have a survey figure in plan view that I want to project to a profile. I have a projection style set, and the command settings use this style. When I project the figure to the profile, nothing shows up.
If I try it again, the command tells me that an object already exists in the profile and will update it. What am I doing wrong? What is the correct procedure to project these lines to a profile?
View 1 Replies
View Related
Aug 20, 2012
I ‘ve put some blocks (Cone penetration test) in a profile view. Then I created view frames and sheets. I tried to insert those blocks into the sheets with the 'Project objects to profile view' command. I get the message: “There are 10 objects outside the Profile view's station range and will therefore be ignored.”
View 5 Replies
View Related
Jul 5, 2012
I have an existing alignment and a profile view with a profile of that alignment. I would like to offset this alignment to show the edges of roadway and add the existing ground profiles to the same profile view. The edge of roadway lines are 3D polylines and I use the 'project objects to profiile view' to to create the profile. I select use existing surface for elevations and it does, however, it only picks up elevations where the 3d polyline has verticies. So where I have a tangent section that crosses a stream it does not show the stream because there are no verticies at that location. If I create a whole new profile view and select the line it picks up elevations all along the polyline.
View 3 Replies
View Related
Jul 6, 2013
I seem to be having trouble changing the lineweight of my profile line. I have changed the line weight in the layer properties, in the Profile properties and tried changed the line weight in the pen style. Everywhere I could think I try to make the line thicker but when I plot, the line is still the same and difficult to distinguish from the grid blocks of the profile view.
View 3 Replies
View Related
