I have multiple alignments. When I create a section view group I would like a label at the top or bottom that is the alignment name. I cant find this option and I'm certain it exists!
View 6 RepliesIs it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
In civil 3d 2014 i need 2 sections (and a profile) all with different scales in the viewports (layout). Sizing of the labels and bands is all fine, only a text item is not updated. I need to display the scale (the number) for the current section (or profile), it works but the scale shown is always the scale from the model and not the scale from the viewport, so the different scaled sections all have the same text in the label, e.g 1:200, even if they are correctly scaled to different factors in defferent viewports.
View 5 Replies View RelatedC3D 2012
Is it possible, in c# code, to add a sectionview to a section view group?
I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
how to have exisitng cross slopes display on a bank of corridor cross sections...I see lots of posts on this but I am having trouble finding the answer. The link below from Add a section view grade label only adds "A" slope label.....I want all of them in all of my sections.
[URL]
Is there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
View 4 Replies View RelatedI am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedHow to show the deflection anglesof alignments. I want to show those angles in band set or profile view.
AutoCAD Civil 3D 2012 SP 2
I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedIn the Multi-Section Creation tool i couldn't find a way to edit or remove Grid Break Labels ,aslo after creation i could Edit it each indvidual Section but not allover all Sections ?
How i can Editit ? also how ican do soin creation And why do i feel that the 2012 is Different from 2010 ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
how to create a section view for a pond other than quick view.
View 2 Replies View RelatedIs there a way to project just one feature line (or anything appropiate...polyline, 3d poly etc) into the sections group or profiles ?
The thing is that Projection tool, labels everything that's a Block, Point, 3d poly ...etc to the sections group.
And it puts all labels in the same layer.
My project theme requires to project forest limit on every section. This is appearing on the survey as a polyline along the road. Civil Engineer / Infrastructure of metropolitan transports [URL]
Is it a bug ? I can add data, and I see it onto my section views but I cant view it again in the dialog. In example, I add a profile at 11 m. using markers and i see it. If I come back to the dialog to add or delete data related I see nothing....
View 3 Replies View RelatedProject objects to profile view... got it. No problems selecting individual survey points or survey figures and projecting to profile view. Is there a way to project a entire point group to a profile. I have a point group created for the large number of points to be projected. Next I right click on the point group and click "select'. Then go to Project objects to profile view. Nothing...
This process works for the survey figures, but not the point groups! In prospector tab go to survey > figures then select CTRL + each figure to project then VIOLA' the whole group of figures are projected.
Is this limited to graphical selections only? If so, is there a workaround to generate a graphical selection set from the point group.
Using C3D 2010 on Win 32bit platform
We have a project where the alignment is not in the center of the section (it's along one edge of the project), but we want the Title Annotation ("STA. 165+00") to show up in the center of the sections.
If you choose "Center" justification in the style, it "centers" it about the zero offset, which in our case is actually the left side.
Is there any way to truly center this call, short of turning it OFF and manually creating separate labels?
Unfortunately, I can't use "Center" and give it a "Y" offset, because the alignment does vary slightly (±30 feet) within these 250' cross sections - which would cause the label to vary by that much also...
With ProfileView I can get Alignment Id.
pv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as ProfileView; ObjectId idAlin = pv.AlignmentId;
Now, I want to do the same but for SectionView.
sv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as SectionView;
but there isn´t : sv.AlignmentId;
Are there any ways to get Sample Line Group Id from section view either section view name or id?
I would like to get station value from selected section view by pick too.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
is it possible to export the position and elevation of points plotted in a section view to a csv or txt file? I have a surface with section profiles cut every 100 feet or so, and would like an external copy of just the data used to plot the section views to use for another analysis.
View 9 Replies View RelatedI'm trying to get rid of the section centerline (red) and magenta circle (shown in the attached image) that persistently show up only in 1 of 10 sections generated via sample lines along an alignment. How to get rid of them?
View 3 Replies View RelatedWhen I click view extents in section editor it zoomes to my assembly. WHen I go to my next station, it zooms out to ridiculous values. How can this be set so I can do some work? I want to view my assembly and a few feet extra left/right/above/below.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I have a problem to set more bands in section view.
Normaly I word with 3 bands (existing elevations, designed elevations and the distances between them), but now I need another 2 bands:
1) is the diference between the top surface of the coridor and the existing surface
2) is the diference between the bottom surface coridor and the existing surface
I want ot ask maybe there is a setting to not let me make more bands?
In fact I make the 2 more bands but the Civil 3D 2012 and 2013 is not giveing me the data in these bands.
I uplloaded a picture for example to be more clear.
I am working on a drawing for the COE. They require that the horizontal scale is 1"=20 feet for cross sections. Unfortunately the sections that I need to cut are so long that they don't fit on the page. Currently I am creating multiple viewports in paper space and creating split section views in that way but it is starting to get out of hand.
Any better way to handle sections that won't fit on a page? I can't change the scale.
I am trying to plot all my cross sections in a drawing, but I whant them in a vertical line. It seems that I can only plot in a horizontal line on sheets.
View 4 Replies View RelatedIs there anyway to create a section view label where you input the offset and elevation data into a section view similar to a station & elevation label for a profile view (see Station-Elevation attached)? Out-of-the Box section view offset elevation labels can only be placed on the section view and dragged to a specified offset & elevation.
View 1 Replies View Relatedhow can I have diferent hatch on the section view, one when I have cut and another when I have fill.
seet attached.
How to set (not to get) maximum or minimum elevation of a grid of specific section view in COM API c++?
or Just tell me the name of the function in COM API c++?
Right, I'm working on a pressurenetwork for a new drinkwaterpipe. I created an alignment from network using the launch pad in the associative tab.
The alignment is crossing several other pipes and cables. What I made using the alignment is a surface profile and the profile of the drinkwaterpipe. Now I want to project the crossing cables and pipes into the profile view.
Now unfortunately it doesn't 'cut' the crossing cables and pipes at the alignment intersection, which would result in circles in my profileview. Instead it projects whole strengs of pipe.
Is there any way to create a section view from an alignment from start to end, instead of sample lines perpendicular?
I am creating section view with my road project. I successfully created center line alignment, surface, surface profile, sample line and section views on every station I needed on my design.
I want to see "subassembly" (travel lane, curb & gutter, sidewalk, 2:1 slope) on my section view. I can block, insert and copy it to my section my manually, but I know this not the right way to do.