When I click view extents in section editor it zoomes to my assembly. WHen I go to my next station, it zooms out to ridiculous values. How can this be set so I can do some work? I want to view my assembly and a few feet extra left/right/above/below.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
When I get into my section editor, the view is zoomed out too far. is there a way to change the width of this view? i looked in display options, but may have skipped over the solution.
View 2 Replies View RelatedHow do I access the Corridor Section Editor view settings and copy them from one drawing to another?
View 1 Replies View RelatedIn my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedI've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedI am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedI have a short corridor, about 300', that ends at a cul-de-sac, and has multiple sections and alignments associated with it. My problem is when I need to edit a section in the "Section Editor" my computer feezes up. It was working fine for a while but now I can't get it to work even on a new drawing. If I can't get this fixed I will have to got to using feature lines. Which is not ideal.
I added a screen capture of my computer's information. And I have the SP1 installed for Acad.
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
how to create a section view for a pond other than quick view.
View 2 Replies View RelatedEvery time I go into Section Editor while working on my corridor I have to reset my Code Set Style Selection. Its not even like I am exiting and re entering the drawing, just the Section Editor. Is there a specific place C3D looks for that style when you enter the editor?
Civil 3D 2014
i7-3930K Overclocked
32 GB Ram
Windows 7 Professional
C3D 2012
When I open the Corridor Section Editor, the Ribbon changes to the Section Editor ribbon, but the section window doesn't come up. If I pan around, parts of the drawing disappear. If I close the editor and regen, everything comes back.
Below is the current status of our working view in the 2014 Corridor Section Editor. I can't see us getting any value for our investment into Civil 3D 2014, before Civil 3D 2015 comes out now.
The polar opposite is actually true, we had too much downtime encountering, analyzing and reporting product defects, and it affected profitability and capability.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
How do I turn off the elevation grid in the section editor when looking at the cross-sections of my corridor?
View 1 Replies View RelatedI've built a corridor using only an Offset Assembly. The assembly represents a new path alongside an existing road and I wanted to use the centerline of the road as the main baseline. I have successfully built the corridor and was able to build the Sample Line and Sample Views. However, I am not able to view the sections in the Section Editor. As soon as I try to get into the Section Editor, I get the error message "No station found". The stations are large, 500+00 and up, so I tried changing the BOP to 0+00, but that had no effect. I tend to think it's a result of not having any subassembly attached directly to the main alignment, only to offset alignments. I'm running the 2011 version.
View 2 Replies View RelatedIs it possible to adjust the vertical exageration of the section view in the corridor section editor?
View 1 Replies View RelatedI have 3 alignments running: EB, WB, and Center alignment. My corridor runs along the EB alignment. Is it possible for me to develop section views for this corridor along the Center alignment?
View 6 Replies View RelatedGetting bizarre display in the Section Editor of the 3D Polylines that are in the drawing. The green line is the EG ground section.
In 2013, this same drawing displays normal, we don't see the 3D polylines in the Section Editor.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
How do I get rid of the green circles in cross section editor? I have looked in the code set styles, and I have found nothing that will resolve this.
View 2 Replies View RelatedWhat could be the trick with corridor section editor in C3D 2014, applying overrides to a stations range won't work. After selecting or typing end station in the 'apply to a station range' prompt nothing happens, the overrides just will not be applied.
To apply overrides for an subassembly (curb depth etc) I must go through all the stations set by corridor frequency in the station range. This is not file specific, as it is the case with all my projects.
I've worked with LDD for 11 yrs. Last week the IT guys changed my PC to Windows 7 64bit, so I can't have LDD and I have to work with C3D. so I am following software tutorials.
for designing a road I created:
alignment ---> surface profile ---> layout profile (project line) ---> assembly ---> subassemblies ---> corridor ---> set target surface and frequencies
Corridor is created with daylights ,but I don't see existing ground in corridor section editor.
There is nothing about this in tutorial. Also I don't know how to calculate the volumes, in LDD after this stage we could calculate the volumes. i think in C3D I should do more for calculation.
I'm having a random issue with the daylight ties lopes not tieing to the EG surface at all stations in the Corridor Section Editor. Some stations daylight fine. In plan view the daylight lines vary left & right as expected but don't display at all in Section Editor.
Some background info:2012 Civil 3D SP1 / 64 bit / WIN7Simple corridor used1 alignmentSame fg profileSame drefd EG surface (set all targets for daylight LT/RT)Only one assembly applied to entire corridor Attached are 2 captions of the issue I'm having which each have a cut & fill occurrence as well as a caption of the entire align. & corridor. I did try deleting corridor & recreating and even recreated a simpler assembly and still have the daylight issue in same areas of corridor.
Unable to edit parameters in Corridor Section Parameter Editor
View 4 Replies View RelatedIt worked fine until the update. Now it's showing EVERYTHING.
View 2 Replies View RelatedI have added intermediate sample lines in my corridor. These sections appear in the section editor and I can make changes to the data. The changes show correctly in the section editor and section view, however, when I plot the cross sections some of these added stations do not show the overrides. They are showing the original assembly group parameters. How do I get all the cross sections to reflect the edited data from the section editor?
View 3 Replies View RelatedWe have a project where the alignment is not in the center of the section (it's along one edge of the project), but we want the Title Annotation ("STA. 165+00") to show up in the center of the sections.
If you choose "Center" justification in the style, it "centers" it about the zero offset, which in our case is actually the left side.
Is there any way to truly center this call, short of turning it OFF and manually creating separate labels?
Unfortunately, I can't use "Center" and give it a "Y" offset, because the alignment does vary slightly (±30 feet) within these 250' cross sections - which would cause the label to vary by that much also...
With ProfileView I can get Alignment Id.
pv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as ProfileView; ObjectId idAlin = pv.AlignmentId;
Now, I want to do the same but for SectionView.
sv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as SectionView;
but there isn´t : sv.AlignmentId;
Are there any ways to get Sample Line Group Id from section view either section view name or id?
I would like to get station value from selected section view by pick too.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
is it possible to export the position and elevation of points plotted in a section view to a csv or txt file? I have a surface with section profiles cut every 100 feet or so, and would like an external copy of just the data used to plot the section views to use for another analysis.
View 9 Replies View RelatedI'm trying to get rid of the section centerline (red) and magenta circle (shown in the attached image) that persistently show up only in 1 of 10 sections generated via sample lines along an alignment. How to get rid of them?
View 3 Replies View Related