AutoCAD Civil 3D :: Section Editor Vs Section Views Labels?

Aug 12, 2013

In my section editor my labels show up correctly and in all the locations I want.  But then, in my cross section file, I look in my section views and they are completely different.  When I try to label more points under the Code Set Styles, they won't even show up on my section views. 

View 6 Replies


AutoCAD Civil 3D :: Pipe Section In Full Height In Section Views?

Feb 20, 2013

I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.

View 2 Replies View Related

AutoCAD Civil 3D :: Creating Section Sheets From Multiple Section Views

May 21, 2012

When i am creating section sheets from multiple section views ,section sheet  view port scale  changes.I did set it correctly in my template.

For example it changs from 1:150 to 1:150_1 

Then in section sheets scetions views are not displaying correctly.

When i change view port scale manually it shows correctly.But it should do to all sheets.

What should I do?

In model spacr multiple section views are showing correctly.

AutoCAD Civil 3D 2012 SP 2
Sri Lanka

View 8 Replies View Related

AutoCAD Civil 3D :: Can't See Corridor Section In Section Views Only Existing

Mar 5, 2012

I think I just haven't done this in a while and can't find the right setting.

I have existing sections.
I have section views.
I created a corridor.

How do I add the corridor section to my existing cross-section in the section views?

I can view them in the corridor section editor.  But I should also be able to add the corridor section to my section views, right?

To plot them, do I NEED to do this through Sheets Sets?  I don't have experience with sheet sets yet.

I don't use Civil 3D often enough anymore.  Still learning much about the new interface and pulling a design together.

View 3 Replies View Related

AutoCAD Civil 3D :: Corridor Section Editor Not Displaying A Section

Mar 8, 2012

I've got a corridor where the section editor does not show a section that the corridor has created.  My frequency is set to 25' with high/low points along curves.  At station 22+75, in the model space the corridor shows a section being created (image #2).  However, I cannot edit or even see that section in the section editor (image #1).  The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station.  This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.

In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00.  I am needing to manually adjust the cross slopes of my lanes.  If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%.  I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.

What is causing the section editor to not even recognize a section?  How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?

Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit

View 6 Replies View Related

AutoCAD Inventor :: Customize Fence Labels For Detail And Section Views?

Jul 9, 2012

Is there a way to customize the fence labels for detail and section views? 

I know we can edit the label directly and add/remove text, but is there way to change the appearance of the label as well, with say a sketched symbol or other graphical representation like a balloon or other customized image?

View 4 Replies View Related

AutoCAD Civil 3D :: Section Views

Dec 6, 2012

I am trying to create section views to track beach erosion. I have created an alignment and sample lines successfully. The shorter sections look as they should. The longer sections are a mirror of themselves (ex: a section that should be 529' in length is drawn as 1058'). Is this a matter of needing to create a corridor and going the other processes that normally have to be done for a road or is there something else I am missing here?

View 7 Replies View Related

AutoCAD Civil 3D :: Png From Section Views

Oct 1, 2012

I'm working with civil 3d 2012,I'm trying to find a solution for the following problem,in Civil I have an alignment of 2kilometer and they want a section view every 5 meters,

automatically I can create over 500 section views, no problem there,but then I want to plot these 500 section views to a png file,and to do that I need to get all of them in separated layouts, for which there also is an automated function but its stops at 255 layouts,I've done 4 km in split up drawings..I've got 40km left no option splitting it up in 1 km sections.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Get All Section Views On Same Page

Jul 10, 2013

I can get all of the same section views on the same page. I'm using sample line group

View 1 Replies View Related

AutoCAD Civil 3D :: Section Views Of Models

May 17, 2013

I have the task of creating elevation views of a site. These views require that the model be clipped along a section line to crop the forground so it doesn't obstruct the view of the site.

I've experimented with the section plane tools in the 3D modeling workspace but I can't get a section view. I suspect it is because they don't work with C3D surface objects. Any workflow for this task? Ultimately I need to generate hard copies of the views for the architect to use for his landscape plans.

View 9 Replies View Related

AutoCAD Civil 3D :: Multiple Section Views

Dec 16, 2013

how to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.

View 1 Replies View Related

AutoCAD Civil 3D :: Section Views Display On Top Of Each Other

Jul 26, 2013

When i bring my section views in, the cross sections display on top of each other, i attached a screen capture.

View 2 Replies View Related

AutoCAD Civil 3D :: Section View Labels

Aug 16, 2012

Is there anyway to create a section view label where you input the offset and elevation data into a section view similar to a station & elevation label for a profile view (see Station-Elevation attached)?  Out-of-the Box section view offset elevation labels can only be placed on the section view and dragged to a specified offset & elevation.

View 1 Replies View Related

AutoCAD Civil 3D :: Section View Labels

Apr 19, 2012

I'm working in 2011 and I'm having a difficult time labeling the section views. Labels are showing up on the retaining wall which I did not assign any labels to in the codes. Also, the vertical faces are labeled on the wall and sidewalks. I am not sure if the assembly or corridor settings are controlling this or if it in the code.

View 6 Replies View Related

AutoCAD Civil 3D :: Create Multiple Section Views

Nov 5, 2013

When I create multi sect views they plot 3 rows from left to right shown below:

0+00     1+00     2+00

I would like it to plot from bottom to top like shown below

2+00     5+00
1+00     4+00
0+00     3+00

Is there somewhere to adjust the settings?

View 2 Replies View Related

AutoCAD Civil 3D :: Show Section Views On Sheet

Nov 14, 2013

I have section views @ 50 feet along my corridor and i want to show them on a sheet. When i create a viewport, those section views are not display in Layout Tab?

View 7 Replies View Related

AutoCAD Civil 3D :: Corridor Assemblies In Section Views

Sep 25, 2012

I created a base drawing for sections that references an alignment. I xrefed in the drawing where my corridor was created. When I create the section views, the corridor shows up perfectly.

I then created a blank sheet and xrefed in my section view base drawing.In this sheet drawing, only parts of the corridors are visible.I have a C&G on one assembly and a shoulder on another assembly that aren't visible. (see pics)The first pic is my section base drawing.

View 3 Replies View Related

AutoCAD Civil 3D :: Representing Object In Section Views

May 22, 2012

I have to represent a road section with limits of houses or any interference on field. All of thees interferences are poly lines, 3dpoly, lines, etc. Is it possible to have a little mark or something like this in a road section, it will work for me a lot for represent the houses in my sections.

View 1 Replies View Related

AutoCAD Civil 3D :: Label Information X / W / Z Into Section Views

Aug 6, 2013

how to make the  label information X,W ,Z into the section views as you see in this pictures(Attachments)

pic1: COGO points in the corridor

pic 2: section view

Use:Civil 3d 2012

View 4 Replies View Related

AutoCAD Civil 3D :: Section Views (Assembly And Corridor)

Aug 8, 2012

I am doing public works type project. A simple road widening project. I created an alignment, surface, profile view and basic road assembly (from tool palettes) and corridor.

I created a corridor and referenced it to my "profile view", "alignment" and to "basic road" assembly. When I created section views, it shows only existing grade based on the surface and the basic road assembly is not showing on my sections. I can't figure out how to do it.

View 4 Replies View Related

AutoCAD Civil 3D :: Generated Section Views Are Empty

Oct 18, 2012

“Creating multiple section views” introduces empty section views?

I’m wondering the reason for which the generated section views are empty!

View 1 Replies View Related

AutoCAD Civil 3D :: How To Turn On Hatching In Section Views

Sep 27, 2012

I have searched the Help fine in Civil 3D, I have searched the tutorials and Knowledge Base online, I have searched the Mastering AutoCAD Civil 3D manual, and I can not fine how to turn on hatching in Section Views. I'm currently running Civil 3D 2013.

View 5 Replies View Related

AutoCAD Civil 3D :: Linktomarkedpoint Not Visible In Section Views?

Jul 16, 2012

I am working on a project that contains a main road with on both sides a bike path. From each of these thins I made a profile, alignment, etc. I made one assembly with two assembly offsets, each on one side of my main road. So far everything is going very well, but here comes my problem.

The two bike paths assembly (these are assembly offsets) I want to connect to my road assembly. I found some information about a "marked point" and the "Linktomarkedpoint" assembly. I placed the marked point on my edge of the road and placed the linktomarkedpoint on my bike path. Rebuilding my corridor and when I took a look in my sections, the line between the bike path and road ain't visible. I gave the marked point an unique name and the linktomarkedpoint I gave the same name as my marked point.

View 6 Replies View Related

AutoCAD Civil 3D :: Inserting New Sections Into Section Views

Mar 9, 2012

I had about 20 cross sections that I created multiple section views for. I added 2 cross sections (one near the beginning, one in the middle).

Can I get these new sections to insert into their proper locations (by station) with a kind of refresh of my multiple section views without having to recreate multiple section views?

I already have the section sheets lined up in viewports on layout tabs.  I want to keep everything in the same place.  If the only way I can add the new sections is to create multiple section views again, what's the best way to handle this?  Draw some kind of cross-hairs in model space when picking where to generate them and pick on the same point every time?

View 3 Replies View Related

AutoCAD Civil 3D :: Cross Section Assembly Views

Aug 8, 2013

Is it possible to have XS sampled assemblies displayed on individual cross sections?  I know that the sample line group properties control which assemblies are sampled and displayed. Say that assemblies A,B and C are sampled and displayed on sections from 0+00 to 3+00.  Can ONLY assemblies A and B be displayed on sections from 1+50 to 2+00, and A.B and C on everything else?

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Networks In Section Views?

Apr 12, 2011

I would like to show a pipe network structure on my section view. The catch- the structure is 10' away from my sample line. Is there any way to project structures onto section views? C3D 2011

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 9 Replies View Related

AutoCAD Civil 3D :: Automatic Cross Section Labels

Dec 9, 2013

create a label style for cross sections that will label the travel way in the run:rise format and will label fore and back slopes in a percent format.  I can figure out how to make them all one or the other, but am having trouble getting them to reflect correctly based on where they are attached.I am having trouble coming up with the actual expression or you can do it thru code set styles, but regardless of settings that I change nothing on the cross section view changes.

View 3 Replies View Related

AutoCAD Civil 3D :: Cross Section Elevation Labels

Mar 21, 2012

Attached is a pdf showing the issue I'm having with the way elevations labels appear on the outside edges of cross sections. 

Issue #1:

I added the dimension to show that the bottom of the cross section is actually at 97.5 but is labeled as 98

Issue #2:

I would prefer the bottom of the cross section to be at an even elevation (98 not 97.5)

View 2 Replies View Related

AutoCAD Civil 3D :: Multiple Cross Section Labels?

Jan 31, 2013

Using 2011 - Having trouble with cross section labeling.  I have multiple label markers such as ROW, and multiple EASEMENT types.  I've created corridors for each label type - each will show up if their corridor has a corridor section line at the same station as the base corridor, but at odd ball stations (like driveway openings)  the labels do not show up, I'm thinking its because I don't have these corridor section lines in each corridor.  Is there an easier work around rather than manually adding the section lines in each corridor?

View 3 Replies View Related

AutoCAD Civil 3D :: Disappearing Or Moving Section Labels?

Oct 16, 2012

I have a section view base map that has labeling at the grade breaks of a corridor section. (see correct labels image)

I made a minor change to the alignment the corridor is using and when I opened my section base, most of the section view labels were messed up. (see messed up labels image)

Some views were missing labels and in others, they were grouped together in a lump.

The settings I am using are in the third image. If I checked either the start or end offset box, then unchecked it and closed the dialog, the labels would fix themselves.For reference, there are about 300 section views in this base drawing.

Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760

View 2 Replies View Related

AutoCAD Civil 3D :: Cross Section Ground Labels

Aug 9, 2013

How can the cross sections be setup to label the existing and proposed grade at the centerline of a cross section, see attached.  Could do this in LD but have not been able to figure it out in Civil 3D

C3D 2013 (latest updates), 2014 Infrastructure Design Suite

Win 7 Pro, 64-bit


View 1 Replies View Related

Copyrights 2005-15, All rights reserved