AutoCAD Civil 3D :: Disappearing Or Moving Section Labels?
Oct 16, 2012
I have a section view base map that has labeling at the grade breaks of a corridor section. (see correct labels image)
I made a minor change to the alignment the corridor is using and when I opened my section base, most of the section view labels were messed up. (see messed up labels image)
Some views were missing labels and in others, they were grouped together in a lump.
The settings I am using are in the third image. If I checked either the start or end offset box, then unchecked it and closed the dialog, the labels would fix themselves.For reference, there are about 300 section views in this base drawing.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
View 2 Replies
ADVERTISEMENT
May 23, 2013
Moving a text box or section label and it disappears then zoom extents and everything disappears. save the file close reopen and everything back to normal.
I have tried exporting to a different AutoCad year (2010) but the same issue is still occurring.
View 2 Replies
View Related
Aug 12, 2013
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies
View Related
Jul 25, 2012
acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
View 6 Replies
View Related
Mar 11, 2011
I'm trying to get a handle on what should and should not be expected to work as far as labeling XREF'd entities goes. I'm using 2011.
I have recently had bearing notes associated with an XREF'd line disappear, and I can't pinpoint the cause.
I had edited a couple of lines in said XREF'd drawing, but NOT the one that was associated with the C3D notes. There are two C3D drawings that XREF this drawing and that have line labels applied to the same, unchanged, line. Yet, all of those labels were gone (in both drawings) when I opened them this morning.
So, should labeling an XREF'd entity work? Are labels predictably lost when a labeled line undergoes a known set of modifications (Sinc relayed his experiences here: [URL] .....
What if the XREF'd drawing is simply saved, with no changes made to a labeled line? Should that be okay?
If labeling XREF's is known to be unpredictable, it sort of puts us back to manual text labels and manual curve tables. Is that really what people are having to do?
View 9 Replies
View Related
Dec 18, 2012
I have C3D 2013 and recently my profile labels for sag and crest vertical curves are disappearing. When I first open the drawing and the program goes through loading I can see the labels but once it stops loading they disappear. All my levels are on, I have ran an audit several times, I have deleted the labels in the manager and replaced them but once I save and quit they are no longer visible. I am able to see the labels through an xref of the drawing but it appears that the labels have been reset to their default position and not where I had adjusted them to view them within the viewport. I have attached pictures of what it looks like.
View 9 Replies
View Related
Aug 13, 2012
I am running CV3D 2011 on a Windows 7 64 bit workstation. I have a road profile that has a band which labels the existing and proposed profile elevations. For some reason the profile band labels (including the stations) randomly disappear and all you see is the band box. If you REgen they will reappear but will dissapear again when you plot preview and they WON"T plot...even though they are there in the drawing!
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 4 Replies
View Related
Aug 16, 2012
Is there anyway to create a section view label where you input the offset and elevation data into a section view similar to a station & elevation label for a profile view (see Station-Elevation attached)? Out-of-the Box section view offset elevation labels can only be placed on the section view and dragged to a specified offset & elevation.
View 1 Replies
View Related
Apr 19, 2012
I'm working in 2011 and I'm having a difficult time labeling the section views. Labels are showing up on the retaining wall which I did not assign any labels to in the codes. Also, the vertical faces are labeled on the wall and sidewalks. I am not sure if the assembly or corridor settings are controlling this or if it in the code.
View 6 Replies
View Related
Dec 20, 2012
I'm using shape outline styles for corridor "structures" materials list to depict my cross section material shapes in section views. After creating the materials list everything looks fine until I exit the file, re-open or try to plot it using Sheet Set Manager. All shape outlines disappear randomly & if regenall is ran after opening xs.dwg the shapes will reappear.
Seems like the shapes should stay put but I'm getting this in all xs.dwg's for all my alignments.
-Attached Sec view 1 .jpg shows how section should look & Sec view 2 shows the disappearing issue.
Again with regenall the shapes usually reappear so the biggest dileema is the inability to do multiple plots & there are many sheets to plot but there are also times when the materials list stops dsplaying & only way to get it back is recreate the materials list.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 5 Replies
View Related
Dec 9, 2013
create a label style for cross sections that will label the travel way in the run:rise format and will label fore and back slopes in a percent format. I can figure out how to make them all one or the other, but am having trouble getting them to reflect correctly based on where they are attached.I am having trouble coming up with the actual expression or you can do it thru code set styles, but regardless of settings that I change nothing on the cross section view changes.
View 3 Replies
View Related
Mar 21, 2012
Attached is a pdf showing the issue I'm having with the way elevations labels appear on the outside edges of cross sections.
Issue #1:
I added the dimension to show that the bottom of the cross section is actually at 97.5 but is labeled as 98
Issue #2:
I would prefer the bottom of the cross section to be at an even elevation (98 not 97.5)
View 2 Replies
View Related
Jan 31, 2013
Using 2011 - Having trouble with cross section labeling. I have multiple label markers such as ROW, and multiple EASEMENT types. I've created corridors for each label type - each will show up if their corridor has a corridor section line at the same station as the base corridor, but at odd ball stations (like driveway openings) the labels do not show up, I'm thinking its because I don't have these corridor section lines in each corridor. Is there an easier work around rather than manually adding the section lines in each corridor?
View 3 Replies
View Related
Aug 9, 2013
How can the cross sections be setup to label the existing and proposed grade at the centerline of a cross section, see attached. Could do this in LD but have not been able to figure it out in Civil 3D
C3D 2013 (latest updates), 2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM
View 1 Replies
View Related
Dec 18, 2013
I am using Civil 3D 2014. I have a section view style that specifies 10-ft majors, displaying text labels for 10-ft majors. However, per the attached image, my section view shows the first label at a 5-ft interval and I have another that does not show the top 10-ft major.
View 1 Replies
View Related
Jul 2, 2013
Why not show the labels in sections?
View 2 Replies
View Related
Jun 27, 2012
Often we build a design surface from feature lines and possibly a grading or two. Then we cut sections.
Now, for set out, and especially for smaller contractors who don't have fancy survey gear, it would be really nice to be able to show design surface levels in section bands BUT ONLY AT THE SURFACE-DEFINING FEATURE LINE LOCATIONS.
I am aware that we can use grade breaks...but this gives us band data at each triangle intercept which is too much data. We can weed this data, but that is indiscriminate and I really need only the data at the surface-defining geometry points (feature line locations.)
We can also use station/elevation labels on the section views but this is time-consuming and non-dynamic. Band labels are dynamic and more or less automatic...if only we could get the discrete locations we need labelled.
View 9 Replies
View Related
Aug 12, 2009
C3D 2009. I have a style that labels the pipe diameter in section view and the type of pipe. When I label the pipe everything shows up fine. Save the drawing and re-open and my labels are gone. I can see them when is opening but after it regenerates, gone. All layers are on display set to true. Tried too many different things and no success. This issue only happens in two drawings.
View 9 Replies
View Related
Dec 29, 2011
In 2011 the pipe network cross section labels had to be exploded or they would disappear once you closed the drawing (even with saving).
In 2012 can you close and open a drawing and have the labels not disappear?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 3 Replies
View Related
Feb 28, 2012
my issue is I have created a style for cross sections that work well in one drawing, and need to copy them to our template. I have been able to copy the styles for the section view, section plot, and some section labels that I needed. However, I cannot find out how to copy over the style that labels my corridor section in the cross section view. When I go to look at what type of object style it is, all I get is a "Obect Style" dialog box. I have been trying to open every setting to find it and have had no luck. I have attached three screen shots. The first is what I want the cross-section to look like, the second is what it currently looks like in the template, and the third is the dialog box I am getting.
View 2 Replies
View Related
Dec 27, 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
View 2 Replies
View Related
Aug 17, 2012
we have this issue that has affected us in Revit 2011 and 2012. For many of our families we have a 3D object, a 2d representation of symbolic lines, and then some editable text/annotation:
- The text is a Generic Annotation annotation family, with a single label, set to display the parameter "Text Frame"
- This family is then inserted into the family of the specific object being created, with, under label's Type Properties, the "Text Frame" of the label being linked with a "Text" parameter in the object family.
This seems to work all fine and dandy, however, we're getting an interesting problem: after working in the file for a while some percentage of the annotation on these families disappear in a view. Sometimes it's just a few, sometimes half, sometimes all of them just go away (everything else, including the symbolic lines, are still there). If you close the file and re-open, they will re-appear. If you nudge them, they will re-appear. Other views may still have them, at least for a time... then they too will dissapear.
This happens both on screen and, dangerously, during printing. You print a whole set, only to discover much of your annotation for objects is gone... (not to mention the cost and waste of trees when you re-print).
Is this a known problem (search only turned up one thread on this), or is there another way to do what I want (have editable annotation on a family) that avoids this issue and I stubmled onto the improper way of doing it?
View 9 Replies
View Related
May 3, 2013
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
View 9 Replies
View Related
Jul 20, 2012
I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
View 2 Replies
View Related
Dec 10, 2002
Is it possible to cusomize "Section" lables to include bubbles? I can't find any command anywhere.
View 2 Replies
View Related
Jul 9, 2012
Is there a way to customize the fence labels for detail and section views?
I know we can edit the label directly and add/remove text, but is there way to change the appearance of the label as well, with say a sketched symbol or other graphical representation like a balloon or other customized image?
View 4 Replies
View Related
Jul 17, 2013
I upgraded to lr5 and am shooting an event that has different groups of participants. To organize the files after I get them into LR, I separate them into folders based on the individual in the image (it is easier than it sounds) . But to my surprise, when I move them, the images are removed from the original folder and are not in the new folder. I am hoping that they are being lost in the catalog and not being deleted.
How can I fiend the images again, and how can I get LR to recognize the images in the future...I am moving them within LR!
View 10 Replies
View Related
Feb 20, 2013
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies
View Related
Mar 26, 2012
C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
View 1 Replies
View Related
May 21, 2012
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
View 8 Replies
View Related
Jul 17, 2013
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
