Moving a text box or section label and it disappears then zoom extents and everything disappears. save the file close reopen and everything back to normal.
I have tried exporting to a different AutoCad year (2010) but the same issue is still occurring.
I have a section view base map that has labeling at the grade breaks of a corridor section. (see correct labels image)
I made a minor change to the alignment the corridor is using and when I opened my section base, most of the section view labels were messed up. (see messed up labels image)
Some views were missing labels and in others, they were grouped together in a lump.
The settings I am using are in the third image. If I checked either the start or end offset box, then unchecked it and closed the dialog, the labels would fix themselves.For reference, there are about 300 section views in this base drawing.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View Relatedacad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
I'm trying to get a handle on what should and should not be expected to work as far as labeling XREF'd entities goes. I'm using 2011.
I have recently had bearing notes associated with an XREF'd line disappear, and I can't pinpoint the cause.
I had edited a couple of lines in said XREF'd drawing, but NOT the one that was associated with the C3D notes. There are two C3D drawings that XREF this drawing and that have line labels applied to the same, unchanged, line. Yet, all of those labels were gone (in both drawings) when I opened them this morning.
So, should labeling an XREF'd entity work? Are labels predictably lost when a labeled line undergoes a known set of modifications (Sinc relayed his experiences here: [URL] .....
What if the XREF'd drawing is simply saved, with no changes made to a labeled line? Should that be okay?
If labeling XREF's is known to be unpredictable, it sort of puts us back to manual text labels and manual curve tables. Is that really what people are having to do?
I have C3D 2013 and recently my profile labels for sag and crest vertical curves are disappearing. When I first open the drawing and the program goes through loading I can see the labels but once it stops loading they disappear. All my levels are on, I have ran an audit several times, I have deleted the labels in the manager and replaced them but once I save and quit they are no longer visible. I am able to see the labels through an xref of the drawing but it appears that the labels have been reset to their default position and not where I had adjusted them to view them within the viewport. I have attached pictures of what it looks like.
View 9 Replies View RelatedI am running CV3D 2011 on a Windows 7 64 bit workstation. I have a road profile that has a band which labels the existing and proposed profile elevations. For some reason the profile band labels (including the stations) randomly disappear and all you see is the band box. If you REgen they will reappear but will dissapear again when you plot preview and they WON"T plot...even though they are there in the drawing!
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
Is there anyway to create a section view label where you input the offset and elevation data into a section view similar to a station & elevation label for a profile view (see Station-Elevation attached)? Out-of-the Box section view offset elevation labels can only be placed on the section view and dragged to a specified offset & elevation.
View 1 Replies View RelatedI'm working in 2011 and I'm having a difficult time labeling the section views. Labels are showing up on the retaining wall which I did not assign any labels to in the codes. Also, the vertical faces are labeled on the wall and sidewalks. I am not sure if the assembly or corridor settings are controlling this or if it in the code.
View 6 Replies View RelatedI'm using shape outline styles for corridor "structures" materials list to depict my cross section material shapes in section views. After creating the materials list everything looks fine until I exit the file, re-open or try to plot it using Sheet Set Manager. All shape outlines disappear randomly & if regenall is ran after opening xs.dwg the shapes will reappear.
Seems like the shapes should stay put but I'm getting this in all xs.dwg's for all my alignments.
-Attached Sec view 1 .jpg shows how section should look & Sec view 2 shows the disappearing issue.
Again with regenall the shapes usually reappear so the biggest dileema is the inability to do multiple plots & there are many sheets to plot but there are also times when the materials list stops dsplaying & only way to get it back is recreate the materials list.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
create a label style for cross sections that will label the travel way in the run:rise format and will label fore and back slopes in a percent format. I can figure out how to make them all one or the other, but am having trouble getting them to reflect correctly based on where they are attached.I am having trouble coming up with the actual expression or you can do it thru code set styles, but regardless of settings that I change nothing on the cross section view changes.
View 3 Replies View RelatedAttached is a pdf showing the issue I'm having with the way elevations labels appear on the outside edges of cross sections.
Issue #1:
I added the dimension to show that the bottom of the cross section is actually at 97.5 but is labeled as 98
Issue #2:
I would prefer the bottom of the cross section to be at an even elevation (98 not 97.5)
Using 2011 - Having trouble with cross section labeling. I have multiple label markers such as ROW, and multiple EASEMENT types. I've created corridors for each label type - each will show up if their corridor has a corridor section line at the same station as the base corridor, but at odd ball stations (like driveway openings) the labels do not show up, I'm thinking its because I don't have these corridor section lines in each corridor. Is there an easier work around rather than manually adding the section lines in each corridor?
View 3 Replies View RelatedHow can the cross sections be setup to label the existing and proposed grade at the centerline of a cross section, see attached. Could do this in LD but have not been able to figure it out in Civil 3D
C3D 2013 (latest updates), 2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM
I am using Civil 3D 2014. I have a section view style that specifies 10-ft majors, displaying text labels for 10-ft majors. However, per the attached image, my section view shows the first label at a 5-ft interval and I have another that does not show the top 10-ft major.
View 1 Replies View RelatedWhy not show the labels in sections?
View 2 Replies View RelatedOften we build a design surface from feature lines and possibly a grading or two. Then we cut sections.
Now, for set out, and especially for smaller contractors who don't have fancy survey gear, it would be really nice to be able to show design surface levels in section bands BUT ONLY AT THE SURFACE-DEFINING FEATURE LINE LOCATIONS.
I am aware that we can use grade breaks...but this gives us band data at each triangle intercept which is too much data. We can weed this data, but that is indiscriminate and I really need only the data at the surface-defining geometry points (feature line locations.)
We can also use station/elevation labels on the section views but this is time-consuming and non-dynamic. Band labels are dynamic and more or less automatic...if only we could get the discrete locations we need labelled.
C3D 2009. I have a style that labels the pipe diameter in section view and the type of pipe. When I label the pipe everything shows up fine. Save the drawing and re-open and my labels are gone. I can see them when is opening but after it regenerates, gone. All layers are on display set to true. Tried too many different things and no success. This issue only happens in two drawings.
View 9 Replies View RelatedIn 2011 the pipe network cross section labels had to be exploded or they would disappear once you closed the drawing (even with saving).
In 2012 can you close and open a drawing and have the labels not disappear?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
What is the difference between Annotation Text versus the Civil 3D Lables? Do you have more control over the annotation text? Do lisp routine work better for annotation text than the Civil 3D Labels?
I have a routine that will create a quick leader and text from the object layer that it selects.
Layer EX-PAVEMENT ----> the quick leader call out would label it as Existing Pavement.
I am labeling structures and need to use the station & offset for the street alignment not the alignment for the pipe network. It works great for the station but the offset is not working properly. It reads 0 as though it's reading the alignment for the pipe network. I've tried copying a label and adding reference text, creating a new label from scratch, putting 2 pieces of reference text in (1 for the station & 1 for the offset), and just doing the offset in the reference text instead of the station & offset...none of those have worked.
View 5 Replies View RelatedI am in the process of modifying our current company standards to conform to another set of standards. The main change is switching from "simplex" font style to "Tahoma".
Simple in theory but problematic in execution, our main alignment label style "GEO-LABL", used for P.O.T, PC, ect. utilizes an underlined reference text object in order to control the length of the line under the call. The base insertion places the call perpendicular to the alignment, when dragged to the left or right it switches to stacked text plan readable. Works like a champ with the "simplex" text style - 1.jpg see attached.
Now simply changing the font to "Tahoma" - 2.jpg the larger you make the text the larger the gap.I am trying to stay away from adding a line for the underline due to the difference in lengths needed when the call gets longer or shorter based on alignment name or stationing.
I am trying to do centerline stationing but the texts are coming out too small and the tick marks are not showing up.
View 2 Replies View RelatedWhen I have my alignment labels and plan view text align to the layout view in Paper Space they plot out very bold.
I am using Style: Swis721 BT-Italic. I use that style in the profile for labels and in plan view. When I plot out the sheet the profile view plots good but the text that was aligned in the plan view is very bold.
When I am trying to label an object, surface slope, elevation or lot line distance my text reverts back to layer 0. I have checked the Label style composser and have everything that I see set to the layer I want it on. When creating the label I am even physically on the proper layer but when I make the label it still goes to 0.
View 1 Replies View RelatedSuppose you have an existing structure that you are going to tie into with a proposed pipe.
We label existing structures with smaller text and a different color (as opposed to proposed labels)
Is there any way to label the structure where the one single proposed pipe text is a larger text size with a different color, as shown here?
The background mask does not align with text in curve labels with the "allow curve text" set to true. See Attached.
I found old posts with this problem for version 2009 and older. Is it still a problem in 2011/12/13?
(running C3D 2012 sp4, Win7 64bit, 8GB)
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
we have this issue that has affected us in Revit 2011 and 2012. For many of our families we have a 3D object, a 2d representation of symbolic lines, and then some editable text/annotation:
- The text is a Generic Annotation annotation family, with a single label, set to display the parameter "Text Frame"
- This family is then inserted into the family of the specific object being created, with, under label's Type Properties, the "Text Frame" of the label being linked with a "Text" parameter in the object family.
This seems to work all fine and dandy, however, we're getting an interesting problem: after working in the file for a while some percentage of the annotation on these families disappear in a view. Sometimes it's just a few, sometimes half, sometimes all of them just go away (everything else, including the symbolic lines, are still there). If you close the file and re-open, they will re-appear. If you nudge them, they will re-appear. Other views may still have them, at least for a time... then they too will dissapear.
This happens both on screen and, dangerously, during printing. You print a whole set, only to discover much of your annotation for objects is gone... (not to mention the cost and waste of trees when you re-print).
Is this a known problem (search only turned up one thread on this), or is there another way to do what I want (have editable annotation on a family) that avoids this issue and I stubmled onto the improper way of doing it?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
View 9 Replies View Related