AutoCAD Civil 3D :: Material Shape Styles Disappearing From Section Views
Dec 20, 2012
I'm using shape outline styles for corridor "structures" materials list to depict my cross section material shapes in section views. After creating the materials list everything looks fine until I exit the file, re-open or try to plot it using Sheet Set Manager. All shape outlines disappear randomly & if regenall is ran after opening xs.dwg the shapes will reappear.
Seems like the shapes should stay put but I'm getting this in all xs.dwg's for all my alignments.
-Attached Sec view 1 .jpg shows how section should look & Sec view 2 shows the disappearing issue.
Again with regenall the shapes usually reappear so the biggest dileema is the inability to do multiple plots & there are many sheets to plot but there are also times when the materials list stops dsplaying & only way to get it back is recreate the materials list.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 5 Replies
ADVERTISEMENT
Nov 22, 2013
I am setting different cut and fill shapes for different material and it keeps plotting the same patterns. I check the material table and the section view display tab for the shape and it all looks correct. for now I went through them manually selecting the fill shape and changin it.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 7 Replies
View Related
Feb 20, 2013
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies
View Related
May 21, 2012
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
View 8 Replies
View Related
Aug 12, 2013
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies
View Related
Mar 5, 2012
I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
View 3 Replies
View Related
Oct 16, 2012
I have a section view base map that has labeling at the grade breaks of a corridor section. (see correct labels image)
I made a minor change to the alignment the corridor is using and when I opened my section base, most of the section view labels were messed up. (see messed up labels image)
Some views were missing labels and in others, they were grouped together in a lump.
The settings I am using are in the third image. If I checked either the start or end offset box, then unchecked it and closed the dialog, the labels would fix themselves.For reference, there are about 300 section views in this base drawing.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
View 2 Replies
View Related
May 23, 2013
Moving a text box or section label and it disappears then zoom extents and everything disappears. save the file close reopen and everything back to normal.
I have tried exporting to a different AutoCad year (2010) but the same issue is still occurring.
View 2 Replies
View Related
Dec 6, 2012
I am trying to create section views to track beach erosion. I have created an alignment and sample lines successfully. The shorter sections look as they should. The longer sections are a mirror of themselves (ex: a section that should be 529' in length is drawn as 1058'). Is this a matter of needing to create a corridor and going the other processes that normally have to be done for a road or is there something else I am missing here?
View 7 Replies
View Related
Oct 1, 2012
I'm working with civil 3d 2012,I'm trying to find a solution for the following problem,in Civil I have an alignment of 2kilometer and they want a section view every 5 meters,
automatically I can create over 500 section views, no problem there,but then I want to plot these 500 section views to a png file,and to do that I need to get all of them in separated layouts, for which there also is an automated function but its stops at 255 layouts,I've done 4 km in split up drawings..I've got 40km left no option splitting it up in 1 km sections.
View 1 Replies
View Related
Jul 10, 2013
I can get all of the same section views on the same page. I'm using sample line group
View 1 Replies
View Related
May 17, 2013
I have the task of creating elevation views of a site. These views require that the model be clipped along a section line to crop the forground so it doesn't obstruct the view of the site.
I've experimented with the section plane tools in the 3D modeling workspace but I can't get a section view. I suspect it is because they don't work with C3D surface objects. Any workflow for this task? Ultimately I need to generate hard copies of the views for the architect to use for his landscape plans.
View 9 Replies
View Related
Dec 16, 2013
how to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.
View 1 Replies
View Related
Jul 26, 2013
When i bring my section views in, the cross sections display on top of each other, i attached a screen capture.
View 2 Replies
View Related
Nov 5, 2013
When I create multi sect views they plot 3 rows from left to right shown below:
0+00 1+00 2+00
I would like it to plot from bottom to top like shown below
2+00 5+00
1+00 4+00
0+00 3+00
Is there somewhere to adjust the settings?
View 2 Replies
View Related
Nov 14, 2013
I have section views @ 50 feet along my corridor and i want to show them on a sheet. When i create a viewport, those section views are not display in Layout Tab?
View 7 Replies
View Related
Sep 25, 2012
I created a base drawing for sections that references an alignment. I xrefed in the drawing where my corridor was created. When I create the section views, the corridor shows up perfectly.
I then created a blank sheet and xrefed in my section view base drawing.In this sheet drawing, only parts of the corridors are visible.I have a C&G on one assembly and a shoulder on another assembly that aren't visible. (see pics)The first pic is my section base drawing.
View 3 Replies
View Related
May 22, 2012
I have to represent a road section with limits of houses or any interference on field. All of thees interferences are poly lines, 3dpoly, lines, etc. Is it possible to have a little mark or something like this in a road section, it will work for me a lot for represent the houses in my sections.
View 1 Replies
View Related
Aug 6, 2013
how to make the label information X,W ,Z into the section views as you see in this pictures(Attachments)
pic1: COGO points in the corridor
pic 2: section view
Use:Civil 3d 2012
View 4 Replies
View Related
Aug 8, 2012
I am doing public works type project. A simple road widening project. I created an alignment, surface, profile view and basic road assembly (from tool palettes) and corridor.
I created a corridor and referenced it to my "profile view", "alignment" and to "basic road" assembly. When I created section views, it shows only existing grade based on the surface and the basic road assembly is not showing on my sections. I can't figure out how to do it.
View 4 Replies
View Related
Oct 18, 2012
“Creating multiple section views” introduces empty section views?
I’m wondering the reason for which the generated section views are empty!
View 1 Replies
View Related
Sep 27, 2012
I have searched the Help fine in Civil 3D, I have searched the tutorials and Knowledge Base online, I have searched the Mastering AutoCAD Civil 3D manual, and I can not fine how to turn on hatching in Section Views. I'm currently running Civil 3D 2013.
View 5 Replies
View Related
Jul 16, 2012
I am working on a project that contains a main road with on both sides a bike path. From each of these thins I made a profile, alignment, etc. I made one assembly with two assembly offsets, each on one side of my main road. So far everything is going very well, but here comes my problem.
The two bike paths assembly (these are assembly offsets) I want to connect to my road assembly. I found some information about a "marked point" and the "Linktomarkedpoint" assembly. I placed the marked point on my edge of the road and placed the linktomarkedpoint on my bike path. Rebuilding my corridor and when I took a look in my sections, the line between the bike path and road ain't visible. I gave the marked point an unique name and the linktomarkedpoint I gave the same name as my marked point.
View 6 Replies
View Related
Mar 9, 2012
I had about 20 cross sections that I created multiple section views for. I added 2 cross sections (one near the beginning, one in the middle).
Can I get these new sections to insert into their proper locations (by station) with a kind of refresh of my multiple section views without having to recreate multiple section views?
I already have the section sheets lined up in viewports on layout tabs. I want to keep everything in the same place. If the only way I can add the new sections is to create multiple section views again, what's the best way to handle this? Draw some kind of cross-hairs in model space when picking where to generate them and pick on the same point every time?
View 3 Replies
View Related
Aug 8, 2013
Is it possible to have XS sampled assemblies displayed on individual cross sections? I know that the sample line group properties control which assemblies are sampled and displayed. Say that assemblies A,B and C are sampled and displayed on sections from 0+00 to 3+00. Can ONLY assemblies A and B be displayed on sections from 1+50 to 2+00, and A.B and C on everything else?
View 2 Replies
View Related
Apr 12, 2011
I would like to show a pipe network structure on my section view. The catch- the structure is 10' away from my sample line. Is there any way to project structures onto section views? C3D 2011
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 9 Replies
View Related
Apr 23, 2013
How to get material section length with vb.net ? i need sample code with vb.net not vb.6?
View 1 Replies
View Related
Sep 24, 2013
For some reason, the label styles is not available for all corridor. i have multiple corridor and want to label the grade (%) of a an element. See attached picture.How do i activate to label features on different corridor
View 1 Replies
View Related
May 16, 2013
I have created section views of my allignment and corridor in my drawing the problem I have is. In some of the section views there is different parts of the different assemblies not showing up. For example in one section I have my lane then my curb then no sidewalk then blvd. It is not the same in each section view either some are missing one thing while others are missing others.
View 1 Replies
View Related
Sep 5, 2013
When creating multiple sections using the draft option what settings control how the sections are placed? For example, 5 across, 4 down.
edit - I have several alignments. One that has 8 section views is created with 4 across and 3 down, another with 18 sections is created with 5 across and 4 down and a third with 34 is created with 6 across and down. I'd like to be able to control this if possible.
View 1 Replies
View Related
Oct 25, 2012
I am using C3D 2012. I my drawing I have 3D solid objects that I want projected into my roadway x-sections. When I use the menu command to "project objects to section views" and select "solids" I get the message "no objects to project". Are their different types of solid objects in autocad?
View 9 Replies
View Related
