AutoCAD Civil 3D :: Assembly Parts Not Showing Up In Section Views?

May 16, 2013

I have created section views of my allignment and corridor in my drawing the problem I have is.  In some of the section views there is different parts of the different assemblies not showing up.  For example in one section I have my lane then my curb then no sidewalk then blvd.  It is not the same in each section view either some are missing one thing while others are missing others.

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Section Views (Assembly And Corridor)

Aug 8, 2012

I am doing public works type project. A simple road widening project. I created an alignment, surface, profile view and basic road assembly (from tool palettes) and corridor.

I created a corridor and referenced it to my "profile view", "alignment" and to "basic road" assembly. When I created section views, it shows only existing grade based on the surface and the basic road assembly is not showing on my sections. I can't figure out how to do it.

View 4 Replies View Related

AutoCAD Civil 3D :: Cross Section Assembly Views

Aug 8, 2013

Is it possible to have XS sampled assemblies displayed on individual cross sections?  I know that the sample line group properties control which assemblies are sampled and displayed. Say that assemblies A,B and C are sampled and displayed on sections from 0+00 to 3+00.  Can ONLY assemblies A and B be displayed on sections from 1+50 to 2+00, and A.B and C on everything else?

View 2 Replies View Related

AutoCAD Civil 3D :: Section Views - Some Subassemblies Only Showing On Certain Stations

Oct 20, 2011

I am having an issue with my section views. Some of my subassemblies are only showing on certain stations. If I view the stations on the cross section editor, the corridor looks just fine, but when I go to the section sheet where the corridor is x-referenced, the driveway disappears.

I have rebuilt the corridor numerous times, detached and reattached the drawing, made a new drawing and recreated the sample lines to no avail. Attached are some pictures to show the disappearing driveway on the right side of the street.

View 8 Replies View Related

AutoCAD Civil 3D :: Assembly Point Codes Not Shown In Section Views?

May 10, 2012

I have a problem with point codes in section views in civil3d 2013. They are not showing at all. Drawing was made in civil3d 2012 and all point codes with defined styles were displayed correctly in section views and now they are all gone. Just link codes are shown. Is there something in setup of code styles that has to be changed?

Even if i set up new code and new label style it does not show up in section view after rebuild. Just in assembly.

If i do the same for link label it does show both in assembly and in section views.

View 1 Replies View Related

AutoCAD Civil 3D :: Pipe Section In Full Height In Section Views?

Feb 20, 2013

I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.

View 2 Replies View Related

AutoCAD Civil 3D :: Creating Section Sheets From Multiple Section Views

May 21, 2012

When i am creating section sheets from multiple section views ,section sheet  view port scale  changes.I did set it correctly in my template.

For example it changs from 1:150 to 1:150_1 

Then in section sheets scetions views are not displaying correctly.

When i change view port scale manually it shows correctly.But it should do to all sheets.

What should I do?

In model spacr multiple section views are showing correctly.

AutoCAD Civil 3D 2012 SP 2
Sri Lanka

View 8 Replies View Related

AutoCAD Civil 3D :: Section Editor Vs Section Views Labels?

Aug 12, 2013

In my section editor my labels show up correctly and in all the locations I want.  But then, in my cross section file, I look in my section views and they are completely different.  When I try to label more points under the Code Set Styles, they won't even show up on my section views. 

View 6 Replies View Related

AutoCAD Civil 3D :: Can't See Corridor Section In Section Views Only Existing

Mar 5, 2012

I think I just haven't done this in a while and can't find the right setting.

I have existing sections.
I have section views.
I created a corridor.

How do I add the corridor section to my existing cross-section in the section views?

I can view them in the corridor section editor.  But I should also be able to add the corridor section to my section views, right?

To plot them, do I NEED to do this through Sheets Sets?  I don't have experience with sheet sets yet.

I don't use Civil 3D often enough anymore.  Still learning much about the new interface and pulling a design together.

View 3 Replies View Related

AutoCAD Inventor :: Centerlines In Section Views Of Partial Cylindrical Parts?

Jul 15, 2013

I'm currently detailing a part that's about one-third of a cylindrical piece (the part is lathed as a whole and cut into thirds). I'm trying to project the centerline onto the section view so I can ordinate dimension to it. 

View 3 Replies View Related

AutoCAD Inventor :: Section View Only For Selected Parts In An Assembly

Sep 1, 2011

Is it possible to define a View Representation in an assembly such that a half section view is active, but only for a certain set of parts within the assembly?

View 5 Replies View Related

AutoCAD Inventor :: Assembly Section View Not Sectioning FG Parts?

Jun 12, 2012

When I make a half section view in an assembly the frame generator members do not section, they remain full length.  Is this normal or something with my setup?

2012 SP2.

View 2 Replies View Related

AutoCAD Inventor :: Showing Parts In Assembly In Phantom

Jun 14, 2012

At one time I managed to divine a way of showing parts in an assembly drawing in phantom. This is characterized by the icon for the part in the browser changing to green colour. Being elderly, I have forgotten how I managed to do this.

View 8 Replies View Related

AutoCAD Civil 3D :: Section Views

Dec 6, 2012

I am trying to create section views to track beach erosion. I have created an alignment and sample lines successfully. The shorter sections look as they should. The longer sections are a mirror of themselves (ex: a section that should be 529' in length is drawn as 1058'). Is this a matter of needing to create a corridor and going the other processes that normally have to be done for a road or is there something else I am missing here?

View 7 Replies View Related

AutoCAD Civil 3D :: Png From Section Views

Oct 1, 2012

I'm working with civil 3d 2012,I'm trying to find a solution for the following problem,in Civil I have an alignment of 2kilometer and they want a section view every 5 meters,

automatically I can create over 500 section views, no problem there,but then I want to plot these 500 section views to a png file,and to do that I need to get all of them in separated layouts, for which there also is an automated function but its stops at 255 layouts,I've done 4 km in split up drawings..I've got 40km left no option splitting it up in 1 km sections.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Get All Section Views On Same Page

Jul 10, 2013

I can get all of the same section views on the same page. I'm using sample line group

View 1 Replies View Related

AutoCAD Civil 3D :: Section Views Of Models

May 17, 2013

I have the task of creating elevation views of a site. These views require that the model be clipped along a section line to crop the forground so it doesn't obstruct the view of the site.

I've experimented with the section plane tools in the 3D modeling workspace but I can't get a section view. I suspect it is because they don't work with C3D surface objects. Any workflow for this task? Ultimately I need to generate hard copies of the views for the architect to use for his landscape plans.

View 9 Replies View Related

AutoCAD Civil 3D :: Multiple Section Views

Dec 16, 2013

how to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.

View 1 Replies View Related

AutoCAD Civil 3D :: Section Views Display On Top Of Each Other

Jul 26, 2013

When i bring my section views in, the cross sections display on top of each other, i attached a screen capture.

View 2 Replies View Related

AutoCAD Inventor :: Stop Hidden Lines From Showing Up In Drawings After Adding Parts To Assembly?

Mar 14, 2013

I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?

Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit

View 7 Replies View Related

AutoCAD Inventor :: 2012 Parts Lists Not Showing Correct Part Numbers In Assembly

Nov 4, 2011

Having problems with parts lists not showing the correct part numbers of the parts included in the assembly. In some cases I've made a new part by renaming an existing part but when I create a parts list it shows the part no of the original existing part used to create the new part, even though the new part is the one in the assembly. Also I have just had a number of similar assemblies and needed to produce parts lists for them. I created the first one and then used 'save as' to rename the drawing including the parts list. Then when I re-opened the newly renamed drawing I assigned it to it's new assembly. However the parts list did not update to show the new part numbers included in it's new assembly.

Is all this a glitch in the system or is there something in the set-up which is causing this problem?

View 7 Replies View Related

AutoCAD Civil 3D :: Create Multiple Section Views

Nov 5, 2013

When I create multi sect views they plot 3 rows from left to right shown below:

0+00     1+00     2+00

I would like it to plot from bottom to top like shown below

2+00     5+00
1+00     4+00
0+00     3+00

Is there somewhere to adjust the settings?

View 2 Replies View Related

AutoCAD Civil 3D :: Show Section Views On Sheet

Nov 14, 2013

I have section views @ 50 feet along my corridor and i want to show them on a sheet. When i create a viewport, those section views are not display in Layout Tab?

View 7 Replies View Related

AutoCAD Civil 3D :: Corridor Assemblies In Section Views

Sep 25, 2012

I created a base drawing for sections that references an alignment. I xrefed in the drawing where my corridor was created. When I create the section views, the corridor shows up perfectly.

I then created a blank sheet and xrefed in my section view base drawing.In this sheet drawing, only parts of the corridors are visible.I have a C&G on one assembly and a shoulder on another assembly that aren't visible. (see pics)The first pic is my section base drawing.

View 3 Replies View Related

AutoCAD Civil 3D :: Representing Object In Section Views

May 22, 2012

I have to represent a road section with limits of houses or any interference on field. All of thees interferences are poly lines, 3dpoly, lines, etc. Is it possible to have a little mark or something like this in a road section, it will work for me a lot for represent the houses in my sections.

View 1 Replies View Related

AutoCAD Civil 3D :: Label Information X / W / Z Into Section Views

Aug 6, 2013

how to make the  label information X,W ,Z into the section views as you see in this pictures(Attachments)

pic1: COGO points in the corridor

pic 2: section view

Use:Civil 3d 2012

View 4 Replies View Related

AutoCAD Civil 3D :: Generated Section Views Are Empty

Oct 18, 2012

“Creating multiple section views” introduces empty section views?

I’m wondering the reason for which the generated section views are empty!

View 1 Replies View Related

AutoCAD Civil 3D :: How To Turn On Hatching In Section Views

Sep 27, 2012

I have searched the Help fine in Civil 3D, I have searched the tutorials and Knowledge Base online, I have searched the Mastering AutoCAD Civil 3D manual, and I can not fine how to turn on hatching in Section Views. I'm currently running Civil 3D 2013.

View 5 Replies View Related

AutoCAD Civil 3D :: Linktomarkedpoint Not Visible In Section Views?

Jul 16, 2012

I am working on a project that contains a main road with on both sides a bike path. From each of these thins I made a profile, alignment, etc. I made one assembly with two assembly offsets, each on one side of my main road. So far everything is going very well, but here comes my problem.

The two bike paths assembly (these are assembly offsets) I want to connect to my road assembly. I found some information about a "marked point" and the "Linktomarkedpoint" assembly. I placed the marked point on my edge of the road and placed the linktomarkedpoint on my bike path. Rebuilding my corridor and when I took a look in my sections, the line between the bike path and road ain't visible. I gave the marked point an unique name and the linktomarkedpoint I gave the same name as my marked point.

View 6 Replies View Related

AutoCAD Civil 3D :: Inserting New Sections Into Section Views

Mar 9, 2012

I had about 20 cross sections that I created multiple section views for. I added 2 cross sections (one near the beginning, one in the middle).

Can I get these new sections to insert into their proper locations (by station) with a kind of refresh of my multiple section views without having to recreate multiple section views?

I already have the section sheets lined up in viewports on layout tabs.  I want to keep everything in the same place.  If the only way I can add the new sections is to create multiple section views again, what's the best way to handle this?  Draw some kind of cross-hairs in model space when picking where to generate them and pick on the same point every time?

View 3 Replies View Related

AutoCAD Civil 3D :: Pipe Networks In Section Views?

Apr 12, 2011

I would like to show a pipe network structure on my section view. The catch- the structure is 10' away from my sample line. Is there any way to project structures onto section views? C3D 2011

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved