AutoCAD Inventor :: 2012 Parts Lists Not Showing Correct Part Numbers In Assembly
Nov 4, 2011
Having problems with parts lists not showing the correct part numbers of the parts included in the assembly. In some cases I've made a new part by renaming an existing part but when I create a parts list it shows the part no of the original existing part used to create the new part, even though the new part is the one in the assembly. Also I have just had a number of similar assemblies and needed to produce parts lists for them. I created the first one and then used 'save as' to rename the drawing including the parts list. Then when I re-opened the newly renamed drawing I assigned it to it's new assembly. However the parts list did not update to show the new part numbers included in it's new assembly.
Is all this a glitch in the system or is there something in the set-up which is causing this problem?
View 7 Replies
ADVERTISEMENT
May 13, 2011
How do I mirror a numbers of parts in an assembly.
There is a MIRROR icon but it's fuction is based on COPY.
I would like a MIRROR comand based on PATTERN not COPY.
View 2 Replies
View Related
Jun 14, 2012
At one time I managed to divine a way of showing parts in an assembly drawing in phantom. This is characterized by the icon for the part in the browser changing to green colour. Being elderly, I have forgotten how I managed to do this.
View 8 Replies
View Related
Oct 15, 2013
I am using Inventor 2014. I have a sketch on a part that does not show up when I put the part into an assembly. Any way to make the sketch show up in the assembly? It is a 3d sketch that is projected to a surface.
View 1 Replies
View Related
May 17, 2011
Concerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
View 9 Replies
View Related
Mar 28, 2012
I go to the Parts List, Insert a Custom Part, click Apply, Click Ok and nothing shows up. I go back in to Edit the Parts List and the Custom Part is not there at all.
View 4 Replies
View Related
Jan 15, 2012
I don't know what I did, but when I edit a part in an assembly the others won't fade. Where the setting is to make the other parts fade and only show the part I want to edit.
View 2 Replies
View Related
Jan 15, 2012
I did something and don't know what. When I edit a part in an assembly all other parts remain solid and won't grey out or fade like normal. What setting to I need to change, I've messed with the settings for hours and haven't found the right one.
View 1 Replies
View Related
Mar 14, 2012
I have just installed Inventor 2012 and am experiencing a bizarre problem with placing content center parts. When I start a new assembly, and place a content center part, I would expect it to locate itself central to the assembly origin. What actually happens is that it grounds itself wherever I click on the screen. This doesn't happen with parts that I have created myself.
Is there a bug in the system or maybe an option that I have unknowingly switched off?
Inventor Professional 2012 SP1
Windows XP Pro 64 Edition SP2
View 3 Replies
View Related
Mar 14, 2013
I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 7 Replies
View Related
Feb 15, 2013
My issue is we have Universal assemblies that never change. These assemblies are thousands of parts. (hardware gaskets other random assemblies.) this top level universal assembly never changes.
to increase time in layouts. we would like to create these universal assemblies into 1 sold part.
Is there a was to export an assembly into a single solid part.
View 1 Replies
View Related
Sep 22, 2006
here's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
View 4 Replies
View Related
Nov 19, 2011
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
View 6 Replies
View Related
May 22, 2012
Is there a way to align multiple Parts Lists?
I have an i Assembly with 7 distinct members. I have a parts list displayed next to each member. I had no problem getting the views to align, but am running into a wall with getting the Parts Lists aligned (other than just eyeballing it).
View 5 Replies
View Related
Jun 7, 2012
I have a really long parts list and would like to know if there is there a way to split the parts list into two distinct shorter lists.
This is how it is done in Solidworks. Just wondering if splitting BOM's is possible in Inventor.
[URL].......
View 4 Replies
View Related
Mar 29, 2012
I'd like to know if it's possible to use two different styles of part list in the same project.
For example, one for assembly drawings and another for single part drawings.
View 4 Replies
View Related
Dec 6, 2011
We are using inventor 2011 and I would like to make the text wrap where I want it to not where the cell length determines. Can I do this in the ipropeties of the part? When I edit the parts list to move wrap the text manually the text turns blue of course, but this also negates the updating of parts automatically. In the part I use an expression to ensure that the description reverts back to the iproperties of the part ie =<G_L> X <G_W> - <MATERIAL>. I would like it to insert a text wrap then proceed to the next line with <STOCKNUMBER> - <PARTNUMBER> so I would look like:
12" X 6" - G40.21-44W
PL. 1/2 - PL-100
View 3 Replies
View Related
Sep 4, 2012
Is it possible to have iLogic rule create parts lists out of View Representations? [URL] .......
View 9 Replies
View Related
Jan 29, 2013
I am currently working on a product where I want to make 2 part lists in my drawing of the same assembly. The first parts list has to view all the parts that are always delivered with our product, and the second one has to show the optional parts and features that could be delivered with the product.
I want both lists to be categorized the same way (comments, material, name), I want the numbers of the list to be chronological (also I don't want the second parts list to start the numbering at 1) and I want both lists to stay connected with their balloons.
Is there any way this can be done, like adding or removing part links to the list manually?
View 1 Replies
View Related
Feb 14, 2013
I thought I'd be efficient & use one assembly with a couple View Reps to represent two variations of our product. But I ran into a problem editing two part lists on an IDW file. Most of the parts are identical.
I have two part lists on an IDW for the same asy & each part list is filtered for one of two View Reps - works great!But I discovered when I edit the item number order in one part list to harmonize with the other, the other one gets re-ordered also & no longer harmonizes with the first one.
Inventor Suite 2013 Ultimate
View 1 Replies
View Related
May 16, 2013
I have created section views of my allignment and corridor in my drawing the problem I have is. In some of the section views there is different parts of the different assemblies not showing up. For example in one section I have my lane then my curb then no sidewalk then blvd. It is not the same in each section view either some are missing one thing while others are missing others.
View 1 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
Jul 10, 2012
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
View 2 Replies
View Related
Mar 6, 2013
This morning the shop brought back a set of drawings and requested that I provide a cut list for the fab department. Our drawings consist of an assembly drawing and materials list on the first page with several individual parts on each of the following pages. I am looking at including a column in the ML for the operation ( laser, saw, shear) and sorting the list by it. However when I do this the Item Numbers on the list are all confused. If a person were to look at a balloon on a drawing and then attempt to find it in the list it would be difficult and time waster.
The questions.
1. Is there a way to renumber the item list after sorting the material?
2. If I place an assembly view off the edge of the sheet for each of the following sheets and then place a materials list on each sheet, is it possible to create a plugin that would find which parts are on the sheet and hide all the other parts on the list? I have just started going through the "my first plugin" tutorial and this sounds like a place where it should be useful but I don't know which tags I need to look for.
View 7 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Oct 30, 2012
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
View 1 Replies
View Related
Oct 31, 2011
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
View 4 Replies
View Related
Jun 25, 2013
We have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies
View Related
Nov 28, 2011
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
View 2 Replies
View Related
Aug 29, 2013
I have an assembly made of three parts. There is ilogic in place to rearrange these parts in the assembly. The part numbers change depending on how the puts are arranged and there length. The part numbers come up fine in the assembly ( i have a window popping up to show them). However when i open the BOM the separate parts are listed but not with there part number just with there file name.
View 9 Replies
View Related
Feb 19, 2013
For some reason the item numbers in my parts list are blank. All the other information populates.
I've gone to the assmebly and varified that the BOM tabs are active and there are numbers in there.
If I inser the parts list as 'legacy' it works fine.
I can't use the renumber function, it just makes all theh item number boxes go yellow in the parts list box,
Inventor 2013.
View 9 Replies
View Related
