it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
Looking for views on what the best method is to copy a selection of parts in IV 2013 which will result in the copied selection to retain it's constraints ? I have an assembly which I have used the mirror method on a batch of parts, also used the standard copy method and pattern components.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
How can I drive parts from an assembly level without using Excel spreadsheets. I know it is possible using iLogic to do it, but I can't figure out how to do it "automatically".
For example, we would like to drive a conveyor roller without the use of a spreadsheet. I figured out I could simply insert user-driven parameters in the top-level assembly and drive the parts with the parameters in the assembly, but it is telling me it would cause a cyclic redundancy, so I cannot do it this way, then I thought about iLogic.
It is currently working OK, but I have to enter in the iLogic rule to manually change the filenames in the rule for it to work.
Why? Mainly because we use a prefix to our parts and we sometimes use Autodesk Vault, sometimes not (depending on the project).
Here is my example;
I have a part named "Tube.ipt", "Bearing.ipt", "Spring.ipt" and "Tige Hexagonale.ipt" along with this code in the assembly level (Rouleau.iam):
Parameter("Spring:1", "GAGE") = WIRE_SPRING
Parameter("Spring:1", "DE") = OD_SPRING
Parameter("Spring:1", "LONGUEUR") = LENGHT_SPRING
Parameter("Tube:1", "LONGUEUR_TUBE") = RL-Parameter("Bearing:1", "EPAULEMENT")-Parameter("Bearing:1", "EPAULEMENT")
Parameter("Tige hexagonale:1", "LONGUEUR_HEXA") = RL+B+B
Parameter("Tige hexagonale:1", "BOSSE_SPRING") = B+0.010 in+Parameter("Bearing:1", "EPAULEMENT_SPRING")+LENGHT_SPRING+WIRE_SPRING
Parameter("Tige hexagonale:1", "BOSSE_BEARING") = B+0.010 in+Parameter("Bearing:1", "EPAULEMENT_SPRING")
As you may see, I would have to change "Tige hexagonale:1" every time we use this assembly on different project for it to update properly. I would like to automate it a little bit more.
How to make it work in iLogic:Search for something that has "Tube" in it's filename in this assembly, then store it into a variable called "Tube" Repeat this step for "Spring" and "Tige" Then replace "tige hexagonale:1" by the variable or something like this...
I am attempting to reverse engineer a Slap Chop for a school project. Being only an amatuer at Inventor, I have made several parts that need to fit together but don't due to erronious measurements. Attached are three of the parts I have so far, and I will make a few replies with the remaining parts. I am trying to make an excel sheet or some table where I can manage all my parameters and have them update in the parts. The table is simply to make it easier for me to quickly check my dimensions.
View 6 Replies View RelatedIf I have parts in an assembly that would like to use the same parameter, what is the best way to do this? I am using AI 2013. Currently I know how to create a base part and using it to derive other parts from it, but this seems there should be a easier way, is there?
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedMy assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
Are there any C++ samples of the use of C Assembly Constraints? The syntax is so much different with VB a few real examples would be really useful.
View 2 Replies View RelatedWhy is it when I select multiple contraints for a component that I can use the delete key on the keyboard to eliminate them but when I select only a single constraint, I have to right click and select delete on the context menu. The delete key will not work on a single constraint.
View 7 Replies View RelatedJust started converting over to 2013 and I can no longer edit constraints. Is this part of the new way.
View 1 Replies View RelatedIn an assembly we can set driven constraints to drive parts etc.. or we can set the contact solver to show contacts.
Is it possible to set something like a driven constraint but so it is flexible between the set parameters?
when creating designs i like to move stuff around with the mouse to see how it works and the potential problems that might arise etc.. however i would like to still move stuff around with the mouse but restrict the movements with constraints.
so if you have a hingy flappy thing, the constraints would be set so it can rotate round the hinge as required but also an angular constraint could be set do it would work between set angles, say 0 to 50 degrees and if it gets to the limit it stops?
Is this possible, I think it would be very useful?
I have a bunch of assemblies that are acting this way and I am not sure why.
I have built the parts and built the sub-assemblies with-out errors, once everything looks good I place the subassemblies into my top level assembly.
Everything still looks good with no errors.
I do a rebuild of the top level assembly and find 20 or so errors.
Most of the errors are bogus and editing the constraint with-out changing anything removes the errors, typicaly.
On a bunch of the sub-assemblies the error showed up in the top level assembly, so I edit the part only to find the constraint is relevant but with errors so I suppress it to remove the error. Save and go back to the top level assembly only to find there is another constraint error in the same assembly that I suppressed the constraint to remove the error. This goes back and forth between top level and sub-assembly till all constraints are suppressed or deleted for the sub-assembly. Then the same thing happens to another sub-assembly.
The only solution that I have found is to delete all constraints and rebuild each sub-assembly with the same constraints that were initially used.
How do I stop this snowball effect?
I want to use I logic to adjust an assembly constraint based on T/F value passed from a master sketch.
I have passed the paramater T/F and/or a user paramater as described in this thread using link (neet trick).. but when the code fires it only works on the true application and not the false.. if i open the rule and then close it the update button becomes available and when updated the false condition updates sucessfully. I have tried just re-running the rule to no avail. It seams that the only way I can get it to triger a false condition is to open the rule... close it and update.
If Parameter("iTrigger0101000") = 1 Thend37_Header1 = -.25 ind34_Header2 = -.25 inElseIf Parameter("iTrigger0101000") = 0 Thend37_Header1 = -.25 ind34_Header2 = 0.0 inEnd If
I am atempting to mirror a large assembly, and noticed that not all of my contraints were retain, is there a way to make to mirror and retain all of the contraints?
View 2 Replies View RelatedI place and fully constrain two components in an assembly them mirror them. To my surprise, the mirror parts are not constrained. I grab them and move them anywhere I want. I closed without saving, reopened and grounded the mirrored components.
View 5 Replies View RelatedIm after programmatically mating 2 components together in an assembly. My stages are as follows:
1)Create New Assembly
2)Add .ipt's
3) One-by-one, mate all the parts together (each part has a plane named "WPStart" and "WPEnd". In each part im after the WPStart being flush mated with the WPEnd of the 2nd part - see image attached. In addition I would like to mate al the XZ planes in each of the parts fluch together and likewize the YZ planes.
3) Mate the parts together
Dim FlushConst As FlushConstraint
FlushConst.AffectedOccurrenceOne = oAssyDoc.ComponentDefinition.Occurrence.Item(1).Workplanes.ItemByName("WPStart") <--------
FlushConst.AffectedOccurrenceTwo = oAssyDoc.ComponentDefinition.Occurrence.Item(2).Workplanes.ItemByName("WPEnd") <--------
I just recently installed Inventor 2012 and I'm finding it extremely annoying assembling parts together. I recall in 2011 I could see the parts interact and how the constraints would effect assemblies as I change offsets, relstionships, etc. But now in 2012 I can't see any of that until I acutallly apply the constrain and if it's wrong I have to back and edit it over multiple times till I get what I want. Is there anyway to get a preview of what will happen before I click the apply buton?
View 2 Replies View RelatedGiven the list of AssemblyConstraints how do I list them textually? For example
// error checking removed for brevityCComPtr<AssemblyConstraints> pConstraintList;pAssDef->get_Constraints(&pConstraintList) ; _tprintf_s (_T("The assembly has %d constraints
"),pConstraintList->Count);const int ikNum = pConstraintList->Count ;for (int iConstraint = 0 ; iConstraint < ikNum ; i++) { CComPtr<AssemblyConstraint> pConstraint; hr = pConstraintList->...
what to put here? how to print out more data here...? }How do I get each constraint from the list?
I noticed when creating assemblies, applying a positional constraint, the parts don't move. In order to get the parts to "move" to their constrained position I have to try and drag them with the mouse then they snap into place. Also updating the assembly works as well.
What setting could I have changed so that once I press apply on a constraint it moves the part immediately?
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
Now I want to know how to exclude derived parameters of an assembly and of occurrences in this assembly.
View 6 Replies View RelatedI need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
what is the procedure for linking ILOGIC rules? There has to be some way, either they are both called from a VBA or VB.NET program.
i want to update parameters in an assembly, then write out the updated IDW to a DWG and/or PDF, then update the parameters, write out etc.
I have both the Rule working in the IAM and the Rule working in the IAM, i just want to call them sequentially.
I have a master layout (ipt), from which I've created derived parts, that get put together in an assembly. I'm able to pass parameters from my master part to the derived parts, but I don't seem to be able to pass parameters from the derived parts to the assembly. Is this possible?
View 9 Replies View RelatedI know that in Inventor 2011 you can add text to your IDW and insert numeric parameters from Parts in an Assembly, BUT what I would like to do is insert parameters that contain text. Ideally I would to just pull the parameters from from the Assembly and place them as Text in the IDW.
I can pull the parameters from the Assembly into the IDW using iLogic, but I still can't insert them in text.
I have design tree like this:
Main Assembly
L Sub Assembly1
L Sub Assembly 2
L Sub Assembly 3
L part 1
in part i have a parameter name ("Panjang")... how to control "Panjang"?. I cannot access a part parameter in Sub-assembly.
[URL]
I am trying to control the parameters contained in a part that is not in my assembly. May sound odd, but I am using the multi body part modeling feature to create all of my bodies in a single part file, then making these components/sub assemblies, and pulling them into my assembly. However, I do not want to have the "control part" in my assembly, I just want it to drive the parts. I cannot figure out how to access these parameters without having the part included in the assembly...
View 7 Replies View RelatedI have the following problem. I design a simple part - an extruded base, so i have a parameter in this part that i can control the extrusion distance - i call this parameter D.
Then i create an assembly and place the part in it. How can i access the parameter D of the part from within the assembly?
I want to place multiple instances of this part in my assembly and control each parameter D of an instance using an excel worksheet that is linked with the assembly. How can i do it ?
My aim is to design a very simple manipulator. Each link has the same shape but a different length. I want to control each length from an excel worksheet and not from an ipart table. I want to have only one worksheet that controls the parameters of my assembly such as constraint angles , and link lengths.
I need to drive more than one constraint at a time. The assembly consist of a hydraulic ram that pulls a cable which is routed around a few pullys and then pulls another linear moving member. I don't really care about modeling the cable right now, I just want the cylinder piston and the final member to move in unison. I can only drive one constraint at a time, so I figured I could relate the two constraints together by setting them equal to a parameter (variable), but that isn't working. Is it me or is driving multiple constraints at a time something that would be very useful for a lot of applications?
View 3 Replies View RelatedHow do i constrain the 4 chains from the frame to the center ring. I have managed to get this far .
View 8 Replies View RelatedAfter I place an iPart into an assembly, how can I change from one configuration to another?
View 1 Replies View Related