I have a master layout (ipt), from which I've created derived parts, that get put together in an assembly. I'm able to pass parameters from my master part to the derived parts, but I don't seem to be able to pass parameters from the derived parts to the assembly. Is this possible?
View 9 RepliesHow do you save features added in an assembly to the part? For example, if I add a hole in an assembly, presently I cannot see it when I open the part. It seems like a very basic function, I'm not sure why it doesn't do it automatically.
View 6 Replies View Relatedit is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
Now I want to know how to exclude derived parameters of an assembly and of occurrences in this assembly.
View 6 Replies View RelatedI need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
what is the procedure for linking ILOGIC rules? There has to be some way, either they are both called from a VBA or VB.NET program.
i want to update parameters in an assembly, then write out the updated IDW to a DWG and/or PDF, then update the parameters, write out etc.
I have both the Rule working in the IAM and the Rule working in the IAM, i just want to call them sequentially.
I know that in Inventor 2011 you can add text to your IDW and insert numeric parameters from Parts in an Assembly, BUT what I would like to do is insert parameters that contain text. Ideally I would to just pull the parameters from from the Assembly and place them as Text in the IDW.
I can pull the parameters from the Assembly into the IDW using iLogic, but I still can't insert them in text.
I have design tree like this:
Main Assembly
L Sub Assembly1
L Sub Assembly 2
L Sub Assembly 3
L part 1
in part i have a parameter name ("Panjang")... how to control "Panjang"?. I cannot access a part parameter in Sub-assembly.
[URL]
How can I drive parts from an assembly level without using Excel spreadsheets. I know it is possible using iLogic to do it, but I can't figure out how to do it "automatically".
For example, we would like to drive a conveyor roller without the use of a spreadsheet. I figured out I could simply insert user-driven parameters in the top-level assembly and drive the parts with the parameters in the assembly, but it is telling me it would cause a cyclic redundancy, so I cannot do it this way, then I thought about iLogic.
It is currently working OK, but I have to enter in the iLogic rule to manually change the filenames in the rule for it to work.
Why? Mainly because we use a prefix to our parts and we sometimes use Autodesk Vault, sometimes not (depending on the project).
Here is my example;
I have a part named "Tube.ipt", "Bearing.ipt", "Spring.ipt" and "Tige Hexagonale.ipt" along with this code in the assembly level (Rouleau.iam):
Parameter("Spring:1", "GAGE") = WIRE_SPRING
Parameter("Spring:1", "DE") = OD_SPRING
Parameter("Spring:1", "LONGUEUR") = LENGHT_SPRING
Parameter("Tube:1", "LONGUEUR_TUBE") = RL-Parameter("Bearing:1", "EPAULEMENT")-Parameter("Bearing:1", "EPAULEMENT")
Parameter("Tige hexagonale:1", "LONGUEUR_HEXA") = RL+B+B
Parameter("Tige hexagonale:1", "BOSSE_SPRING") = B+0.010 in+Parameter("Bearing:1", "EPAULEMENT_SPRING")+LENGHT_SPRING+WIRE_SPRING
Parameter("Tige hexagonale:1", "BOSSE_BEARING") = B+0.010 in+Parameter("Bearing:1", "EPAULEMENT_SPRING")
As you may see, I would have to change "Tige hexagonale:1" every time we use this assembly on different project for it to update properly. I would like to automate it a little bit more.
How to make it work in iLogic:Search for something that has "Tube" in it's filename in this assembly, then store it into a variable called "Tube" Repeat this step for "Spring" and "Tige" Then replace "tige hexagonale:1" by the variable or something like this...
I am trying to control the parameters contained in a part that is not in my assembly. May sound odd, but I am using the multi body part modeling feature to create all of my bodies in a single part file, then making these components/sub assemblies, and pulling them into my assembly. However, I do not want to have the "control part" in my assembly, I just want it to drive the parts. I cannot figure out how to access these parameters without having the part included in the assembly...
View 7 Replies View RelatedI have the following problem. I design a simple part - an extruded base, so i have a parameter in this part that i can control the extrusion distance - i call this parameter D.
Then i create an assembly and place the part in it. How can i access the parameter D of the part from within the assembly?
I want to place multiple instances of this part in my assembly and control each parameter D of an instance using an excel worksheet that is linked with the assembly. How can i do it ?
My aim is to design a very simple manipulator. Each link has the same shape but a different length. I want to control each length from an excel worksheet and not from an ipart table. I want to have only one worksheet that controls the parameters of my assembly such as constraint angles , and link lengths.
I am attempting to reverse engineer a Slap Chop for a school project. Being only an amatuer at Inventor, I have made several parts that need to fit together but don't due to erronious measurements. Attached are three of the parts I have so far, and I will make a few replies with the remaining parts. I am trying to make an excel sheet or some table where I can manage all my parameters and have them update in the parts. The table is simply to make it easier for me to quickly check my dimensions.
View 6 Replies View RelatedIf I have parts in an assembly that would like to use the same parameter, what is the best way to do this? I am using AI 2013. Currently I know how to create a base part and using it to derive other parts from it, but this seems there should be a easier way, is there?
View 1 Replies View RelatedI have created an assembly containing several parts. I want to export several text parameters of the assembly and parts into the i properties of the corresponding idw so that I can use them in a text block.
View 4 Replies View RelatedI am working in one assembly. in that assembly i created all the part with using i part & same part i called in to the assembly & created i assembly. while creating drawing i have facing problem to show the model parameters in to the assembly drawing table. How to link the model parameters in assembly parameters with using i assembly.
View 1 Replies View RelatedMy goal is to open have people go into a central assembly file, type in their specific parameters and the various part files update within the assembly. I wish to do this without the need for an excel sheet, but when I try to link the parameters from the assembly file to the part files, it will not allow me to insert these parts. I get an error about an "assembly can not be placed into itself."
Iparts will not work as this has an infinite amount of sizes.
Is there a way to work with parameters on a suppressed assembly using iLogic.Everything works fine, but when I suppressed a part ilogic rule give me an error: Parameter: The component named "xxxxx:1" was not found.
View 1 Replies View RelatedIs there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies View RelatedI have a part called "bracket" which has a multi-value parameter "mass" which can be 100, 200, 300, or 400 and controls the width of the bracket.I have an assembly into which I have placed thee brackets.
How do I set different parameters for each of the instances of "bracket"?I want one bracket with mass = 100, one with mass = 200, and one with mass = 300, such that I have three brackets of different widths.
I must not be searching on the right text in Google because I find only ways to change the value of the parameter within the core component (such that all brackets change and end up the same width).
I have an assembly which contains a CComPtr<ComponentOccurrence> pThisCompOcc , and I'd like to do two things.
Get the name of the "base" object, not the display name of the occurence Change the model and user parameter values of the occurrence I suspect that I need to find the function or method which gives me a CComPtr<PartComponentDefinition> pPartCompDef which the occurrence points to for the Q1, but what about Q2?
Presumably the parameters are associated with the Component Occurrence and the "real" name is associated with the Part Component Definition?
Is it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
I have created a iLogic form for my skeletal part file that drives my assembly. The issues is that it is a few steps to get the assembly to update.
Current Steps: open skeletal part fileuse form to change size parameterssave new skeletal size changesopen assemblypress the update button if changes haven't already been applied...I have tried to link these parameters directly to the assembly and tried to create the form using those linked parameters from the skeletal part file. It looks like it would work, but I am unable to edit the parameters once the form is created.
I am hoping that the I can skip opening and editing the skeletal part file.open assembly fileuse form to change size and dimensions, and all part files and drawings are updated to that new shape and size.
I have tried to create a global Form in the skeletal part file, and tried to update the size changes in the assembly file.I was able to changes the inputs this way, but once I pressed the apply I get an error with no changes. what I want but I am not very up to date on iLogic or these forms. I will be searching Google for now.
I'm working on a small design project and creating a program in Inventor that utilizes a 2D Sketch to calculate the forces in a 2D static Bridge.... Although this is Besides the point.
In order to do what I want, I've found it will be easier to use Arrays. Unfortunately I'm having trouble passing arrays through various functions and setting them to each other.
These errors are constantly popping up
Rule Compile Errors in Bridge Stress, in Sketch Test Code.ipt
Error on Line 60 : Number of indices is less than the number of dimensions of the indexed array.
Error on Line 63 : Number of indices is less than the number of dimensions of the indexed array.
Error on Line 69 : Number of indices is less than the number of dimensions of the indexed array.
Error on Line 174 : Number of indices is less than the number of dimensions of the indexed array.
Error on Line 308 : Number of indices is less than the number of dimensions of the indexed array.
Attached you'll find the code I'm using.
I'm trying to create a .DLL to access a database from within iLogic. I'm new to VB.net so I'm having some trouble. I need to pass a multidimensional array as an argument to the DLL, but when I try to run the code I get an error that says "Number of indices exceeds the number of dimensions of the indexed array."
Here is my code..
The errors occur on the sData(0,i) and the sData(1,i)
I left all the database code off, because passing the array is the big issue I believe.
Public sub AddRecord(ByRef sData() As String)
For i = 0 to FieldQty
rst.Fields.Item(sData(0,i).Value = sData(1,i)
Next
End Sub
Is there a way to rename the Identity Data Parameter- Assembly Code?
View 3 Replies View RelatedHow to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedI am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013