what is the procedure for linking ILOGIC rules? There has to be some way, either they are both called from a VBA or VB.NET program.
i want to update parameters in an assembly, then write out the updated IDW to a DWG and/or PDF, then update the parameters, write out etc.
I have both the Rule working in the IAM and the Rule working in the IAM, i just want to call them sequentially.
I have created a iLogic form for my skeletal part file that drives my assembly. The issues is that it is a few steps to get the assembly to update.
Current Steps: open skeletal part fileuse form to change size parameterssave new skeletal size changesopen assemblypress the update button if changes haven't already been applied...I have tried to link these parameters directly to the assembly and tried to create the form using those linked parameters from the skeletal part file. It looks like it would work, but I am unable to edit the parameters once the form is created.
I am hoping that the I can skip opening and editing the skeletal part file.open assembly fileuse form to change size and dimensions, and all part files and drawings are updated to that new shape and size.
I have tried to create a global Form in the skeletal part file, and tried to update the size changes in the assembly file.I was able to changes the inputs this way, but once I pressed the apply I get an error with no changes. what I want but I am not very up to date on iLogic or these forms. I will be searching Google for now.
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
Now I want to know how to exclude derived parameters of an assembly and of occurrences in this assembly.
View 6 Replies View RelatedI need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
I have a master layout (ipt), from which I've created derived parts, that get put together in an assembly. I'm able to pass parameters from my master part to the derived parts, but I don't seem to be able to pass parameters from the derived parts to the assembly. Is this possible?
View 9 Replies View RelatedI know that in Inventor 2011 you can add text to your IDW and insert numeric parameters from Parts in an Assembly, BUT what I would like to do is insert parameters that contain text. Ideally I would to just pull the parameters from from the Assembly and place them as Text in the IDW.
I can pull the parameters from the Assembly into the IDW using iLogic, but I still can't insert them in text.
I have design tree like this:
Main Assembly
L Sub Assembly1
L Sub Assembly 2
L Sub Assembly 3
L part 1
in part i have a parameter name ("Panjang")... how to control "Panjang"?. I cannot access a part parameter in Sub-assembly.
[URL]
How can I drive parts from an assembly level without using Excel spreadsheets. I know it is possible using iLogic to do it, but I can't figure out how to do it "automatically".
For example, we would like to drive a conveyor roller without the use of a spreadsheet. I figured out I could simply insert user-driven parameters in the top-level assembly and drive the parts with the parameters in the assembly, but it is telling me it would cause a cyclic redundancy, so I cannot do it this way, then I thought about iLogic.
It is currently working OK, but I have to enter in the iLogic rule to manually change the filenames in the rule for it to work.
Why? Mainly because we use a prefix to our parts and we sometimes use Autodesk Vault, sometimes not (depending on the project).
Here is my example;
I have a part named "Tube.ipt", "Bearing.ipt", "Spring.ipt" and "Tige Hexagonale.ipt" along with this code in the assembly level (Rouleau.iam):
Parameter("Spring:1", "GAGE") = WIRE_SPRING
Parameter("Spring:1", "DE") = OD_SPRING
Parameter("Spring:1", "LONGUEUR") = LENGHT_SPRING
Parameter("Tube:1", "LONGUEUR_TUBE") = RL-Parameter("Bearing:1", "EPAULEMENT")-Parameter("Bearing:1", "EPAULEMENT")
Parameter("Tige hexagonale:1", "LONGUEUR_HEXA") = RL+B+B
Parameter("Tige hexagonale:1", "BOSSE_SPRING") = B+0.010 in+Parameter("Bearing:1", "EPAULEMENT_SPRING")+LENGHT_SPRING+WIRE_SPRING
Parameter("Tige hexagonale:1", "BOSSE_BEARING") = B+0.010 in+Parameter("Bearing:1", "EPAULEMENT_SPRING")
As you may see, I would have to change "Tige hexagonale:1" every time we use this assembly on different project for it to update properly. I would like to automate it a little bit more.
How to make it work in iLogic:Search for something that has "Tube" in it's filename in this assembly, then store it into a variable called "Tube" Repeat this step for "Spring" and "Tige" Then replace "tige hexagonale:1" by the variable or something like this...
I am trying to control the parameters contained in a part that is not in my assembly. May sound odd, but I am using the multi body part modeling feature to create all of my bodies in a single part file, then making these components/sub assemblies, and pulling them into my assembly. However, I do not want to have the "control part" in my assembly, I just want it to drive the parts. I cannot figure out how to access these parameters without having the part included in the assembly...
View 7 Replies View RelatedI have the following problem. I design a simple part - an extruded base, so i have a parameter in this part that i can control the extrusion distance - i call this parameter D.
Then i create an assembly and place the part in it. How can i access the parameter D of the part from within the assembly?
I want to place multiple instances of this part in my assembly and control each parameter D of an instance using an excel worksheet that is linked with the assembly. How can i do it ?
My aim is to design a very simple manipulator. Each link has the same shape but a different length. I want to control each length from an excel worksheet and not from an ipart table. I want to have only one worksheet that controls the parameters of my assembly such as constraint angles , and link lengths.
I am attempting to reverse engineer a Slap Chop for a school project. Being only an amatuer at Inventor, I have made several parts that need to fit together but don't due to erronious measurements. Attached are three of the parts I have so far, and I will make a few replies with the remaining parts. I am trying to make an excel sheet or some table where I can manage all my parameters and have them update in the parts. The table is simply to make it easier for me to quickly check my dimensions.
View 6 Replies View RelatedIf I have parts in an assembly that would like to use the same parameter, what is the best way to do this? I am using AI 2013. Currently I know how to create a base part and using it to derive other parts from it, but this seems there should be a easier way, is there?
View 1 Replies View RelatedI have some manufacturing dimensions that are an end result of my design so they are driven dimensions at the end of my modeling history and pulled into the ipart table. If I make some design changes I need these dimensions to update too. The problem is they do not automatically update and require a manual activation of each child memeber for the dimension to update.
The dreaded "The Values in the active row don't match the document's current values. do you wish to update the table before continuing" Click, enter, Click, enter, Click, enter.
Autodesk Inventor 2012 Certified Assosicate
Autodesk Inventor 2012 Certified Professional
linked Excel file to Inventor 12 file parameters. Windows 7, Excel MS office professional '10. Linked excel file, here dimensions are driven by parameters which are driven by excel. toggled 'immediate update' Still - i have to open the sketch - it shows the updated number from Excel, but only on opening the sketch will it change the model to use the new dimension value.
View 3 Replies View RelatedI have a problem with using the excel spreadsheet to hold my parameters and then making them auto update in the model.
I have the excel 2003 spreadsheet saved in the same folder in the projects directory as the model. When I create the spreadsheet and enter the parameters and values etc I save and close the file.
When I am in inventor 2013 64 bit with SP1 installed, I open the model and can link the spreadsheet to the model and the model reflects the values in the spreadsheet. I also click update on the parameters dialog box.
I then open the spreadsheet and make some changes to the values, save the file and even go to the extreme of closing the file. When I go back into Inventor it recognises there has been some changes in the underlying spreadsheet. The update button is active in the tool bar. However trying to update the models by what ever means does not update the model parameters to those in the spreadsheet. Even closing the model and reopening it does not make a difference.
The only way I can get this to work is disconnecting the file and then reconnecting the file through the links option in the parameters dialog box. Then the model reflects the correct values and updates the model accordingly.
My concern is there is quite a bit of stuff on the net about 2013 not working with 2014 inventor anyway.
I have created an assembly containing several parts. I want to export several text parameters of the assembly and parts into the i properties of the corresponding idw so that I can use them in a text block.
View 4 Replies View RelatedI am working in one assembly. in that assembly i created all the part with using i part & same part i called in to the assembly & created i assembly. while creating drawing i have facing problem to show the model parameters in to the assembly drawing table. How to link the model parameters in assembly parameters with using i assembly.
View 1 Replies View RelatedMy goal is to open have people go into a central assembly file, type in their specific parameters and the various part files update within the assembly. I wish to do this without the need for an excel sheet, but when I try to link the parameters from the assembly file to the part files, it will not allow me to insert these parts. I get an error about an "assembly can not be placed into itself."
Iparts will not work as this has an infinite amount of sizes.
Is there a way to work with parameters on a suppressed assembly using iLogic.Everything works fine, but when I suppressed a part ilogic rule give me an error: Parameter: The component named "xxxxx:1" was not found.
View 1 Replies View RelatedIs there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies View RelatedI have a part called "bracket" which has a multi-value parameter "mass" which can be 100, 200, 300, or 400 and controls the width of the bracket.I have an assembly into which I have placed thee brackets.
How do I set different parameters for each of the instances of "bracket"?I want one bracket with mass = 100, one with mass = 200, and one with mass = 300, such that I have three brackets of different widths.
I must not be searching on the right text in Google because I find only ways to change the value of the parameter within the core component (such that all brackets change and end up the same width).
I have an assembly which contains a CComPtr<ComponentOccurrence> pThisCompOcc , and I'd like to do two things.
Get the name of the "base" object, not the display name of the occurence Change the model and user parameter values of the occurrence I suspect that I need to find the function or method which gives me a CComPtr<PartComponentDefinition> pPartCompDef which the occurrence points to for the Q1, but what about Q2?
Presumably the parameters are associated with the Component Occurrence and the "real" name is associated with the Part Component Definition?
Is it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
It is possible to create parts that can update there size from changing the "root" (possibly called the derived-from part??) dimensions. I have a tubular frame structure and there is sheet metal components that enclose this structure.
We make these units in 2 standard sizes, but in the last few months, we have been getting requests from clients for extra components to be installed or sometimes components to be removed. This changes the size of the unit. Also depending on which mine they go to, some need to be shorter or longer and wider or narrower.
I have created a frame that I can change easily to to required dimensions, but it would be a dream if all the sheet metal components updated to the frame size. Most times these doors and sheet metal components stay in the same location, so if everything updated with a simple change to the frame size, that would make my job easier, and leave me more time to create new products.
I can't upload any files due to size, but I have attached a few screen shot to clarify things. Basically it is a frame unit, with doors and access panels to electrical components inside.
i have some parts in my assembly wich are rotatable, i made some 2d drawings of my machine.
when change a position in the assembly it also change in the 2d drawing which is logic.
is there a way i can stop inventor from updating my 2d drawing when i change something in the main assembly?
im using inventor 2013.
I am working on an assembly with subassemblies totaling over 400+ parts. I have been renaming a bunch of the files, then opening the assembly and updating the part associasions. Most parts changed their name to the respective file name, while others have not (within the assembly). When I open the actual part, the proper part name shows up, but within the assmeblies the original name shows. I went into iproperties and the occurences tab; the proper name is shown. The proper part names show up within design assistant as well (via right clicking on assembly file).
How can I have the part names within the assemblies update to the proper names?
as a part of automating manufacturing drawings, am trying to include ilogic code in the drawing , that would accept values from the user and store it as "user parameters" and make corresponding changes in the inventor drawing file.So, to replicate my issue on a smaller scale, i had created 2 parts and created an assembly out of these 2 parts. I used the assembly in my drawing.
In the Drawing i created a user parameter .. say "external_param". I am opening the drawing and changing the value of the user parameter through the (Fx) parameter table.
doc = ThisDoc.DocumentIf external_param >= 50 And external_param <= 99 ThenParameter("block_1.ipt.d0") = 15 'change the length of the blockParameter("block_1.ipt.d14") = 3 'change the number of holes in the blockElseIf external_param >= 100 And external_param <= 199 ThenParameter("block_1.ipt.d0") = 40Parameter("block_1.ipt.d14") = 5ElseIf external_param >= 200 And external_param <= 299 ThenParameter("block_1.ipt.d0") = 80Parameter("block_1.ipt.d14") = 6ElseIf external_param >= 300 And external_param <= 399 ThenParameter("block_1.ipt.d0") = 160Parameter("block_1.ipt.d14") = 9End IfRuleParametersOutput()iLogicVb.UpdateWhenDone = True'InventorVb.DocumentUpdate()
As you can see, i have commented out InventorVb.DocumentUpdate() , im not quite sure what would accomplish the update and save of the assembly document in the background (without prompting for a save/update). I have also tried thisDoc.Save and thisdoc.update. Using these 2 commands along with the InventorVb.DocumentUpdate() or iLogicVb.UpdateWhenDone caused Inventor to Crash.
The right click context menu on the top level assembly (on the model tree in Inventor) has the option of 'Open Drawing'.
Is there a way to do that via iLogic? Unfortunately I can't figure it out if there is. I would like to open and update the relevant drawing.
Also have tried it the other way around, that is to run my rues in the assembly from the drawing since the drawing is the parent. But I am not sure how to reference the assembly.
Im working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
Sometimes I need to revise an assembly/part and I forget to open the drawing first and check a few things before I do. Inevitably my B-Hole employees (that's right, you know who you are if you are reading this! ) don't constrain their section lines and I end up losing a whole bunch of annotations that I then need to put back.
Is there a way to defer the updates to a drawing outside of the document settings for that drawing? I need to open this up, tie down their section lines, attach the detail cuts, etc. then get it to update.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)