i have some parts in my assembly wich are rotatable, i made some 2d drawings of my machine.
when change a position in the assembly it also change in the 2d drawing which is logic.
is there a way i can stop inventor from updating my 2d drawing when i change something in the main assembly?
im using inventor 2013.
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I was wondering if there was a way to suppress a component in the main assembly, and keep it from appearing in the parts list whenever I create one in the idw. environment? I am creating an iassembly, and generating different file versions from the main assembly in my table. In order for me to create different versions off of this main assembly, it is required that I suppress certain sub assemblies or components. I can't get the suppressed componenets to not show up in my parts list when I create it. I turned off enabled and visibility and it still appears in the BOM. Creating a different level of detail doesn't even solve this.
I know I can manually not have it show up in the BOM, but it becomes very time consuming trying to make certain rows not appear in the BOM table.
I have a sub assembly with a sliding part in the main assembly but the sliding part is locked, the "flexible" option is greyed out?My head is not in gear this year yet! Am I able to move unconstrained parts in sub assemblies via the main assembly by pulling them with a mouse?
View 2 Replies View RelatedI have a sub assembly that I am making a drawing of. The assembly drawing needs to also display the main assembly as a reference part (in phantom lines). The sub assembly is made up of flexible hoses that need their connection points referenced.
Inserting the main assembly into the drawing, so that I can see both the main assembly and the sub assembly together, messes up the parts list and balloons.
There must be a way to dislay the sub assembly in the main assembly and still have the part list and ballons reference the sub assembly?
I have 4 different sub assemblies , each with a common part , I need to line up all these common parts in my main assembly.
View 5 Replies View RelatedHow can i use a level of detail from sub assembly in the main assembly?
View 2 Replies View RelatedIs there a way of getting a family tree of all the parts and sub-assemblies of a main assembly?
I would like this so I can keep track on what parts need drawings (manufactured parts) and if the drawing has been done.
I've got a machine designed that has a couple hundred parts - originally built as one main assembly (with a number of weldment subassmblies). The problem is that the BOM is too large to feasibly have on the drawing and still show assembly detail. I'm trying to avoid a multi-sheet configuration.
So I've grouped certain items and demoted into subassemblies. The problem is that all the subassemblies are attached to a main frame- and I'd like to show this frame in each of the subassemblies as a reference. Is there a way to add a "phantom" copy of the framework to each of the subassemblies to that it can be seen? (and the assembler can see how the subassembly is mounted on the frame) Otherwise all these parts are just floating in space on the subassembly (and constraints are lost on the subs).
I'd like to keep the frame on the top assembly, as it may be customized for future machines, while using the same subassemblies.
2014 Product Design Suite
W7Pro-64
Intel Xeon E5-1620 @ 3.60 GHz 16GB RAM
Dual 1GB NVIDIA Quadro K600 graphics
Although the part, marked in blue in the picture, has, to my opinion, degrees of freedom, i cannot rotate it round the main assembly axis, the Z axis.
Maybe it's connected to the 2 holes underneeth it, which i projected?
Or maybe because of the axis i made through the M24 thread?
I have one problem in ilogic i developed the model using ilogic rules and dimension values updated through the User interface form.
problem is while entering the values in UI, model updates automatically, but I want to stop automatic update and after entering the all the parameters in the UI then click the done button only update the model.
My UI is like this
It's possible.
I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
It is possible to create parts that can update there size from changing the "root" (possibly called the derived-from part??) dimensions. I have a tubular frame structure and there is sheet metal components that enclose this structure.
We make these units in 2 standard sizes, but in the last few months, we have been getting requests from clients for extra components to be installed or sometimes components to be removed. This changes the size of the unit. Also depending on which mine they go to, some need to be shorter or longer and wider or narrower.
I have created a frame that I can change easily to to required dimensions, but it would be a dream if all the sheet metal components updated to the frame size. Most times these doors and sheet metal components stay in the same location, so if everything updated with a simple change to the frame size, that would make my job easier, and leave me more time to create new products.
I can't upload any files due to size, but I have attached a few screen shot to clarify things. Basically it is a frame unit, with doors and access panels to electrical components inside.
what is the procedure for linking ILOGIC rules? There has to be some way, either they are both called from a VBA or VB.NET program.
i want to update parameters in an assembly, then write out the updated IDW to a DWG and/or PDF, then update the parameters, write out etc.
I have both the Rule working in the IAM and the Rule working in the IAM, i just want to call them sequentially.
I am working on an assembly with subassemblies totaling over 400+ parts. I have been renaming a bunch of the files, then opening the assembly and updating the part associasions. Most parts changed their name to the respective file name, while others have not (within the assembly). When I open the actual part, the proper part name shows up, but within the assmeblies the original name shows. I went into iproperties and the occurences tab; the proper name is shown. The proper part names show up within design assistant as well (via right clicking on assembly file).
How can I have the part names within the assemblies update to the proper names?
as a part of automating manufacturing drawings, am trying to include ilogic code in the drawing , that would accept values from the user and store it as "user parameters" and make corresponding changes in the inventor drawing file.So, to replicate my issue on a smaller scale, i had created 2 parts and created an assembly out of these 2 parts. I used the assembly in my drawing.
In the Drawing i created a user parameter .. say "external_param". I am opening the drawing and changing the value of the user parameter through the (Fx) parameter table.
doc = ThisDoc.DocumentIf external_param >= 50 And external_param <= 99 ThenParameter("block_1.ipt.d0") = 15 'change the length of the blockParameter("block_1.ipt.d14") = 3 'change the number of holes in the blockElseIf external_param >= 100 And external_param <= 199 ThenParameter("block_1.ipt.d0") = 40Parameter("block_1.ipt.d14") = 5ElseIf external_param >= 200 And external_param <= 299 ThenParameter("block_1.ipt.d0") = 80Parameter("block_1.ipt.d14") = 6ElseIf external_param >= 300 And external_param <= 399 ThenParameter("block_1.ipt.d0") = 160Parameter("block_1.ipt.d14") = 9End IfRuleParametersOutput()iLogicVb.UpdateWhenDone = True'InventorVb.DocumentUpdate()
As you can see, i have commented out InventorVb.DocumentUpdate() , im not quite sure what would accomplish the update and save of the assembly document in the background (without prompting for a save/update). I have also tried thisDoc.Save and thisdoc.update. Using these 2 commands along with the InventorVb.DocumentUpdate() or iLogicVb.UpdateWhenDone caused Inventor to Crash.
The right click context menu on the top level assembly (on the model tree in Inventor) has the option of 'Open Drawing'.
Is there a way to do that via iLogic? Unfortunately I can't figure it out if there is. I would like to open and update the relevant drawing.
Also have tried it the other way around, that is to run my rues in the assembly from the drawing since the drawing is the parent. But I am not sure how to reference the assembly.
Im working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
Sometimes I need to revise an assembly/part and I forget to open the drawing first and check a few things before I do. Inevitably my B-Hole employees (that's right, you know who you are if you are reading this! ) don't constrain their section lines and I end up losing a whole bunch of annotations that I then need to put back.
Is there a way to defer the updates to a drawing outside of the document settings for that drawing? I need to open this up, tie down their section lines, attach the detail cuts, etc. then get it to update.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
Just got my Wacom draw tablet working with GIMP....but now I have a whole new set of issues GIMP will not respond to either the Wacom pen or mouse then stops responding to my main keyboard and main mouse ., lets me draw a little on one layer and then just stops working. Today when I tried to configure the tablet settings in the tool box it didn't read the tablet at all. And yes the tablet was plugged in. I think I am starting to hate GIMP.
View 1 Replies View RelatedI would like to make a form that updates / creates custom properties for ALL parts in an assembly so that i dint have to go through them one by one.
Is there any sample code anywhere or a good code resource?
Inventor 2012.how would I input the total quantity of doors in the .iam in order to update the Parts List quantity column? I have a lot of user inputs in the .iam file set up to change width, height, etc that are based off of Parameters in the .iam, but I don't know how the user can enter assembly quantities in order to get the Parts List to update the Quantity column correctly?
I have attempted using custom iProperties but how to get it to display based off a user input Parameter.
I'm using Inventor 2011 and when I go to change parameters using iLogic in an assembly model, (sometimes it is a component suppression, other times it is an iPart component change) it won't update the associated drawing file. I need to go into the BOM on the drawing and renumber the balloons, or change something else in order for the custom iProperties to update in the drawing template. If I just change the iPart component, then the BOM doesn't need to update making the renumbering of balloons redundant.
I'm using iLogic to update all of the iProperties and component references, then reattach balloons. What I would like to do is automatically update the custom iProperties drawing template fields, and renumber the drawing BOM.
I have created a iLogic form for my skeletal part file that drives my assembly. The issues is that it is a few steps to get the assembly to update.
Current Steps: open skeletal part fileuse form to change size parameterssave new skeletal size changesopen assemblypress the update button if changes haven't already been applied...I have tried to link these parameters directly to the assembly and tried to create the form using those linked parameters from the skeletal part file. It looks like it would work, but I am unable to edit the parameters once the form is created.
I am hoping that the I can skip opening and editing the skeletal part file.open assembly fileuse form to change size and dimensions, and all part files and drawings are updated to that new shape and size.
I have tried to create a global Form in the skeletal part file, and tried to update the size changes in the assembly file.I was able to changes the inputs this way, but once I pressed the apply I get an error with no changes. what I want but I am not very up to date on iLogic or these forms. I will be searching Google for now.
I went into an assembly to change some parts and sub-assemblies and now everytime I move a part or constrain something I get this message "Errors Occurred During Update". Why is this happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
How do I stop automatic rotation on the main screen in PE11? I tend to drag my thumb on the mouse pad of my Mac, which unwittingly causes the image I'm editing to rotate.
View 1 Replies View RelatedNew user 2014
Part created in assembly does not update to part file.
I made a change to my materials library. I changed the color (from dark grey to light grey) of one material. I then saved this back to my library.
Now, when I start a new part, I get a warning that the material does not match the library. So, rather than using the material in the part, I opened the template and updated the material to match the library. (Manage >Update Styles).
This is where the problems come into play. In the update styles dialog, if I compare materials against my custom materials and then compare it to my Favorites, it just a continuious circle. It is like the favorites are stored inside the part and do not get updated to match the custom materials library. (I thought the whole idea behind using a library was to get the information out of the parts).
Here is a short video showing what it does. [URL] .....
The only way I can get the favorites to match is to delete the favorite material, update the style and the add the favorite back in. That is a bunch of work. The problem I got with this is that there are thousands of parts that have been created that has this favorite in it. The only way to update these is to open each part (if I knew which one), delete the favorite, update the materials and then add the favorite back in.
I see the same thing in 2013 and 2014.
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.