AutoCAD Inventor :: Update Quantities In Parts List Based On Parameter In Assembly?
Apr 12, 2012
Inventor 2012.how would I input the total quantity of doors in the .iam in order to update the Parts List quantity column? I have a lot of user inputs in the .iam file set up to change width, height, etc that are based off of Parameters in the .iam, but I don't know how the user can enter assembly quantities in order to get the Parts List to update the Quantity column correctly?
I have attempted using custom iProperties but how to get it to display based off a user input Parameter.
View 3 Replies
ADVERTISEMENT
Mar 6, 2012
Is there a way to have the parts list filter to show only the visible parts from the view representation, especially the quantities? I thought that was what the filter is for. And if not then what is the filter used for?
IV 2012 sp1
View 1 Replies
View Related
Nov 2, 2012
I have an assembly consisting of both sub assemblies and individual parts.When I insert the bill, it is only showing me the parts and assy's needed to build the assembly.Is there a way to have it list the sub assemblies and then their lower level parts, with quantities?
View 2 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Oct 19, 2011
I have a macro that I acquired somewhere (possibly these boards, can't remember now) for placing a parts list. I have modified it somewhat to change the location on the sheet where the list gets placed, as well as a sub that starts the autoballoon command afterward.
The macro is set up to place the parts list in the upper left corner, by adding the parts list width to the Mini Point of the border. This works perfectly well, except that we have two parts list styles, and they are differently sized.
What I would like to do is have the macro detect the parts list style, and change the offset value depending on which style it finds. I am an extreme novice with the API, who basically knows just enough to tweak sample code a bit, and have not been able to find anything close enough to use as an example.
How I should go about this, or even post some samples of something similar? Current code is shown below.
Public Sub CreatePartsList() On Error Resume Next ' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the active sheet. Dim oSheet As Sheet Set oSheet = oDrawDoc.ActiveSheet ' Set a reference to the first drawing view on ' the sheet. This assumes the first drawing ' view on the sheet is not a draft view. Dim oDrawingView As DrawingView Set oDrawingView = [code].......
The macro does not have to set the parts list style - that is controlled by the drawing Standard. It just needs to detect what it is, and place the list accordingly.
View 7 Replies
View Related
Jul 31, 2012
I need to assign the dimension in my screenshot to a parameter so I can use it to drive another assembly. However, I can't find any way to capture it in a usable manner.
In the screenshot I have an associative part inserted that contains only a sketch with the projected line and point that I wish to measure between, but the geometry in the sketch does not update when the model geometry changes. This seems to be normal behavior?
View 3 Replies
View Related
Jul 12, 2012
I double click to update my parts list, when I select apply or ok, the updates do not happen.
I have to close Inventor and re-open to see the changes.
Windows 7 64-bit
Autodesk Design Suite Premium 2013
View 5 Replies
View Related
Oct 18, 2012
It is possible to create parts that can update there size from changing the "root" (possibly called the derived-from part??) dimensions. I have a tubular frame structure and there is sheet metal components that enclose this structure.
We make these units in 2 standard sizes, but in the last few months, we have been getting requests from clients for extra components to be installed or sometimes components to be removed. This changes the size of the unit. Also depending on which mine they go to, some need to be shorter or longer and wider or narrower.
I have created a frame that I can change easily to to required dimensions, but it would be a dream if all the sheet metal components updated to the frame size. Most times these doors and sheet metal components stay in the same location, so if everything updated with a simple change to the frame size, that would make my job easier, and leave me more time to create new products.
I can't upload any files due to size, but I have attached a few screen shot to clarify things. Basically it is a frame unit, with doors and access panels to electrical components inside.
View 9 Replies
View Related
Apr 10, 2012
Using Inventor 2012. I have created a parts list in my .idw that is tied to a .iam Assembly file. In the .iam file I have two instances of the assembly, where one hides certain parts, the other hides others. I can manually tell the parts list which instance I want it to read (see attached image), however, is there a way to have it update automatically? I.e. when I go in to my .iam file and activate one or the other, save the file, then the parts list will auto update itself to include the correct items? Everything else from part names to iProperties auto update in the list, so I'm curious if it can read the correct assembly instance.
View 4 Replies
View Related
Nov 7, 2013
I am just having a flashback to another software, but is it possible to insert a parts list into an assembly model? For those of us that want and need to manipulate it within the assembly model without having to create a drawing?
Inventor Suite 2012
Windows 7 Professional
Intel (R) Xeon (R) CPU 3.47 GHz
12.0 GB Memory, 64 bit OS
View 7 Replies
View Related
Feb 7, 2013
Im working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
View 9 Replies
View Related
Feb 4, 2013
We have an issue regarding Parts Lists. We currently produce a 'master parts list drawing' for the jobs we produce. This drawing has 2 rolled up parts list on it -
1 - purchased parts - so buying can order all the required parts in one go.
2 - manufactured parts - so production know which and how many parts to make.
Both of these can be setup in Inventor (using filters) so they display only the correct parts from the BOM. However, neither of these show assembly / subassembly files (and consequently drawings). Is there any way of creating a parts list that can show assembly files only?
View 1 Replies
View Related
Apr 24, 2003
How I can get my parts list to show a total weight? Obviously, getting the weight of each part into the parts list is easy. However, I have not been able to find a way to automatically get a total weight for the entire assembly.
View 5 Replies
View Related
Jul 25, 2012
At my workplace it has been standard practice in Autocad to call out bolt assemblies in a parts list as: 1/2-13 unc hex hd. bolt w/flat washer & nut. How to do this in Inventor? I know I can enter this info on the assembly iProps for the bolt assembly, I was hoping someone came up with an automated format, maybe pulling info from the bolt itself to populate the assembly iProps?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
View 4 Replies
View Related
Sep 6, 2013
I would like to make a form that updates / creates custom properties for ALL parts in an assembly so that i dint have to go through them one by one.
Is there any sample code anywhere or a good code resource?
View 1 Replies
View Related
Apr 3, 2012
how I can export an assembly parts list to a text file that can be opened by notepad?
I want to do this from the IAM file, rather than from an IDW file.
View 1 Replies
View Related
Nov 27, 2012
I have created an assembly that has a parts list, and in this parts list I have up to 100 mono detail drawings. I would like to know if there is a way to print all of these drawing from that list in a massive plot.
At my previous company we had something like this in AutoCAD where a script was created to look at the drawings and print all drawings mentioned in the assembly BOM and subsequent sub-assemblies, it worked beautifully.
I find that I have to print all drawings to paper or PDF individually.
View 7 Replies
View Related
Nov 19, 2011
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
View 6 Replies
View Related
Aug 23, 2012
How can I change size of the content center part in an assembly based on parameters using iLogic.
There is also the possibility that I would need to replace from content center. I have been unsuccessful in adapting previous examples to work as I need. attached is an example of a part I am tryig to change with parameters and the start of some iLogic. I am using inventor 2012.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
Aug 7, 2013
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
View 2 Replies
View Related
Dec 9, 2013
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
View 3 Replies
View Related
Jul 10, 2012
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
View 2 Replies
View Related
May 3, 2013
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 5 Replies
View Related
Sep 22, 2011
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
View 2 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Oct 30, 2012
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
View 1 Replies
View Related
Oct 31, 2011
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
View 4 Replies
View Related
Nov 28, 2011
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
View 2 Replies
View Related
Dec 10, 2008
I was just wondering why there is no base unit for parts based on Area?
I model a lot of parts that are made from Plate.
When you order or sell plate it is usually sold by the Square Meter
The same would go for Square millimeter, Square foot etc.
Also other base units would be handy like Pack, Box, Carton I am sure there are many more.
The main one I really can't do without is Square Meter.
View 3 Replies
View Related
Dec 28, 2013
Is it possible to update an existing User Parameter. While I can only delete-create a new. In this case the connection is lost with BOMQuantity.
View 5 Replies
View Related
