How can I change size of the content center part in an assembly based on parameters using iLogic.
There is also the possibility that I would need to replace from content center. I have been unsuccessful in adapting previous examples to work as I need. attached is an example of a part I am tryig to change with parameters and the start of some iLogic. I am using inventor 2012.
We are developing a macro for steel structures and we know about the program to insert or place a content center component in assembly through VBA programming. If there are provisions for changing the object type and changing length in that importing process it will be very useful.
View 9 Replies View RelatedToday, all of a sudden, my coworkers and I cannot place standard parts from our content center (there are only three of us). We are not using Vault - but we have set up our Content Center to access a network location:
N:StandardsInventorContent Center FilesLibraries
This has worked for months ever since we set it up. Problems just started today for all of us. Parts that DO work are parts that you have to tell it an extruded length (like structural steel or tube/pipe). Nothing else will work (fasteners, pipe fittings, shaft collars, etc).
Interestingly, if I select to insert the part "as custom" instead of "as standard", all parts work like they should.
For the parts that do not work, I can navigate through all of the menus to select parts, but instead of getting the "Save As" dialogue, I get the "Unable to create component" error message.
I am using Windows 7 64bit and Inventor 2012 SP1 (Build 190). When placing a new content center item an error message of "Unable to place component" is reported. Content center was working previously.
I determined the problem resulted in using a custom Date format in the Windows Region and Language setting. To duplicate go to Control Panel -> Region and Language ->Formats Tab -> Additional settings button -> Date tab and change the Short date format to a custom format (I was using ddd M/dd).
To fix simply reset to a standard date format.
Note that this can be done whilst Inventor is running and I have have submitted a bug report. None of the standard date formats resulted in errors. I have tested "ddd-dd/M", "ddd/MMM/yyyy", "yyyy/MM/dddd", and "yyyy-MM-ddd" and all resulted in an error. "yyyy-MM-dd" did not result in any error.
The commented code does not work. I want to be able to open a part and change its size parameters before i open the assembly. this code will run as an external rule in a new empty file.
If i can do it without opening the part, that is even better. Test can I open a part, change a param, then close part.
Dim fname As String
fname ="C:Workspacemy_progchanF_BB_L.ipt"
Dim pDoc as PartDocument = ThisApplication.Documents.Open(fname,False)
pDoc = ThisApplication.Documents.Open(fname)
These are just attempts to find a syntax that works. I need the method to change the parameter.
'param = pDoc.PartComponentDefinition.Parameter.Param("TKNS")
'pdoc.parameter.Param("TKNS") = 8
pdoc.Save
pdoc.Close
We have copied a content centre family, for example
Fasteners->Pins->Clevis Pins->Clevis Pins With Head
Is it possible to change the copied families location, for example.
Fasteners->standard parts
Is it possible or can I only move it if I republish it, but I can't do that because I don't have the part.
Since i get around with the content center i am making our own custom frames and parts.
Now i have made a new category in the structural shapes category with all our own standards. Because we're using some of the standard DIN EN 10210-2 pipes i want to copy this library to our own category and remove some of the pipes we never use.
What i did is:
-save copy as the family.
-move to my own library view
- tried to drag and drop the copied part to our own library (not possible)
- tried to change the family properties (parameter mapping) "Structural Shapes->Round Tubes" (not possible)
Is there any way to change the category, move/copy it to the our own category and delete the old one, of this copied library part , so it is easy reachable in the frame generator or "place from content center"?
I have a part that was made from content center and modified further. I would like Inventor to no longer recognize this part as a content center part. It has been renamed and migrated to 2013 format, but still when inserting into an assembly the assembly recognizes it as a content center part in the browser.
Also, the browser title for the part will not update with the file name.
Is there a way to pick (16) hex bolt from the content center in any model and change the length of them all at the same time.
View 1 Replies View RelatedI need to change the Base Quantity of family templates in CC from GL = ... to Each. (I know there are several different qty, but I need this to Each because of ERP-system).
I use open from CC and place a tube in an iam, and changing BOM-settings to Each on that tube. Then I replace template in the family in CC editor with this file. And everything seems OK.
When I use "Place from CC" and place a tube from this family, everything is in perfect order. The ipt has Base Quantity set to Each just like I wanted.
I use Frame Generator and insert tubes from this family, then the Base Quantity "bounce" back from Each of GL = ...
I need this to work also in Frame Generator.
I'm looking for a way to change the size of a custom content center part via ilogic. I found a way to replace them on this forum but this is not ideal for, because that creates a new part every time i change the size of the part.
View 2 Replies View RelatedCan I change the description that appears in the properties from content center files ? I want that appear Pa Allen or something like it, but the description is "Hexagon Socket Button Head Screw - Product grade A" from Content Center.
View 1 Replies View RelatedSomehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
what code I would use in an assembly if I want to enable and make visible certain parts depending on the positional rep I am using.
Basically I am having trouble reading the pos rep into an iLogic code
Inventor 2012.how would I input the total quantity of doors in the .iam in order to update the Parts List quantity column? I have a lot of user inputs in the .iam file set up to change width, height, etc that are based off of Parameters in the .iam, but I don't know how the user can enter assembly quantities in order to get the Parts List to update the Quantity column correctly?
I have attempted using custom iProperties but how to get it to display based off a user input Parameter.
I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content. I have tried reinstalling the content center and all of the options are selected but still no BSI?
View 2 Replies View RelatedI can log into data managment services outside of inventor.
I can't log into content center or access frame generator from inventor.
INV 2009
I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.
How can i do for use these components? and other question, how can i create account at vault?
We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
At my company we currently have a huge number of Autocad deployments for 2010,2011,2012. Right now our deployments weren't setup to include the content centers. I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files. I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.
View 6 Replies View RelatedTwo computers with Inventor Pro 2011 on them, same set up in Apllication Options/Content Center and Apllication Options/File. On one Inventor sees Content Center on the other does not. What could be the problem?
View 2 Replies View RelatedInstalled 2014 recently, and now my Content Center has nothing in it. The "Place from Content Center" window loads, and there are no folders. My item count is 0. I've attached a screen shot for reference. Clicking the refresh button does nothing.
We have no custum hardware/materials/etc.
If I try to update the content center library (step 2), the Configure Libraries is full of "Not Available"s. Again, I've attached a screen shot. I'm nervous to continue migrating with out all that info.
There are two pc's with IV, and the content center is working fine on the other pc. The CC is a local thing, and only my computer seems to be upset.
I want to make a customized channel with all the dimesnions fixed - except A and G (variables). See attached screen shot.
View 1 Replies View RelatedI just created an empty Fastenal Library, and it is set to Read/Write. We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal. I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.
When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to. The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not. I can't select Plain, which is what I need, but I can select Ball.
Also, is there a way to delete sub folders? I right click on Pins or Rivets, and the option to Delete Category is greyed out.
I have been working on creating custom content center families that will populate our company's part numbers and descriptions into the browser and drawing BOM. I have been quite successful in this except with the material. I've created custom materials for the fasteners that have the specified strengths and finishes per the fastener. By doing this I've created a different problem.
How can I create a custom property that will insert a specified value for material into the BOM? I've tried to change the link for Project.Material and then the part inserts as Inventor's default. I don't think creating individual material styles for each fastener is a viable one since I'll end up with duplicate style names.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer
Where I can get a pdf of the standard Content Center Library? Just a list of all the parts and sizes along with nomenclature.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
I am using content center for fasteners I want for my assembly.However, when I close the assembly drawing and try to reopen it, the link has been lost between the assembly and the fasteners and I am unable to find them.
I have created a project file before I start the assignment thinking this will solve the linkage problem but no luck.
I'm trying to create a custom Content Center bolt that can be one of three different materials (6.8, 8.8, 10.9). The materials are stored in our Styles Library, and the project specifies "Use Styles Library = Yes"; so the three materials are visible from the Content Center Editor. The Material column in the Content Center Editor is defined to "Map To Inventor Property: Project.Material". Everything looks fine. But no matter what material I select, I get 6.8.
I've already got LOTS of parts published with custom materials and they all work fine, but the big difference is that these families are all the SAME material. I'm having problems with getting a family to use DIFFERENT materials. We're using Inventor 2009.
I'm looking for a 2" x 1" x 3/16" bar channel in the Content Center but I cannot find anything smaller than 3" x 1.41" x 0.17". I've been looking under Structural Shapes > Channels. Am I missing content from the Content Center? Or does this just not exist in the Content Center?
View 6 Replies View RelatedI'm very new to Autodesk Inventor 2013.I'm working on a small project on my laptop at school. Recently I tried to work on this project at home. So I put everything on a Memory Stick, plugged it in at home and opened the file as usual. The problem is that the file needs references to the content center parts like screws etc. and can't find them. I was looking through my whole computer for this content center files Inventor is asking me, but I can't find them.
If I open a new project and open the content center it works without problems. The problem is just that I can't tell Inventor where the parts are to which it needs to be referenced.
