Although the part, marked in blue in the picture, has, to my opinion, degrees of freedom, i cannot rotate it round the main assembly axis, the Z axis.
Maybe it's connected to the 2 holes underneeth it, which i projected?
Or maybe because of the axis i made through the M24 thread?
I've got a machine designed that has a couple hundred parts - originally built as one main assembly (with a number of weldment subassmblies). The problem is that the BOM is too large to feasibly have on the drawing and still show assembly detail. I'm trying to avoid a multi-sheet configuration.
So I've grouped certain items and demoted into subassemblies. The problem is that all the subassemblies are attached to a main frame- and I'd like to show this frame in each of the subassemblies as a reference. Is there a way to add a "phantom" copy of the framework to each of the subassemblies to that it can be seen? (and the assembler can see how the subassembly is mounted on the frame) Otherwise all these parts are just floating in space on the subassembly (and constraints are lost on the subs).
I'd like to keep the frame on the top assembly, as it may be customized for future machines, while using the same subassemblies.
2014 Product Design Suite
W7Pro-64
Intel Xeon E5-1620 @ 3.60 GHz 16GB RAM
Dual 1GB NVIDIA Quadro K600 graphics
I have several parts designed "car line" in their respective parts.
I would like to simply add them to an assembly in their respective axis positions.
Obviously "place" drops in in an arbitrary position to then be "Assembled". Not what I am looking for.
I was looking for a copy/ paste function between part / assembly but there seems no way to paste into an assembly.
There are two cases, that should behave the same, but they don't.
First program works normally. Inventor generates a circular Pattern with the given Part.
' Part referenced in Obejct-Collection-Object
o_ObjectCollection (is defined)
' reference an Axis of the Assembly
[Code].....
Now, the second case, I try to take the Work Axis from a Part, that is placed in the Assembly,
but Inventor does not generate the Pattern. If I set the Axis visible, or even rename it, it works. But the AddCircularPattern does not work.
' Part referenced in Obejct-Collection-Object
o_ObjectCollection (is defined)
' reference an Axis from Part, placed in Assembly
[code]....
I have an assembly of 3 parts. I want to align holes from 2 of the parts and then fix them all in that position (as they will be welded together). I can't figure out how to do that (lock-in position). I restrained on axis and surface-to-surface but I don't know how to prevent 50168P and 50181B from rotating around.
View 4 Replies View RelatedMy assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
How do you create a new Workplane from a Defualt Plane and rotate it along a default Axis?I am new to API and trying to create workplanes and rotate them along a Axis.
Im trying to use "AddByPlaneAndOffset" is this the right method?
how to rotate a work plane around a circular axis ? I have a work plane on the end of a tube, I need the work plane set at an angle.
View 1 Replies View RelatedI am trying to create a wheel that can be rotate about the horizontal axis. It should have a hole for axle to fit through. However, when I try to do this it will not let me select the horizontal axis to rotate about. I also tried to rotate about a center line that I created but it wouldn't do that either..
Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram
I'm trying to rotate a piece in an assembly by a selected axis to a precise angle, but the program just won't let me. I get to rotate it around with my mouse, but it only lets me change the angles at 5 degrees minimum. I try to type in a precise angle into the box, but it only lets me type in 1 character. Below is a screenshot of what I mean (I'm using Inventor 2011).
[URL]....
It either only lets me put in the first digit or won't let me manually change the value at all. What is up with this? The tutorials clearly says I can put in a arbitrary value.
I was wondering if there was a way to suppress a component in the main assembly, and keep it from appearing in the parts list whenever I create one in the idw. environment? I am creating an iassembly, and generating different file versions from the main assembly in my table. In order for me to create different versions off of this main assembly, it is required that I suppress certain sub assemblies or components. I can't get the suppressed componenets to not show up in my parts list when I create it. I turned off enabled and visibility and it still appears in the BOM. Creating a different level of detail doesn't even solve this.
I know I can manually not have it show up in the BOM, but it becomes very time consuming trying to make certain rows not appear in the BOM table.
I have a sub assembly with a sliding part in the main assembly but the sliding part is locked, the "flexible" option is greyed out?My head is not in gear this year yet! Am I able to move unconstrained parts in sub assemblies via the main assembly by pulling them with a mouse?
View 2 Replies View Relatedi have some parts in my assembly wich are rotatable, i made some 2d drawings of my machine.
when change a position in the assembly it also change in the 2d drawing which is logic.
is there a way i can stop inventor from updating my 2d drawing when i change something in the main assembly?
im using inventor 2013.
I have a sub assembly that I am making a drawing of. The assembly drawing needs to also display the main assembly as a reference part (in phantom lines). The sub assembly is made up of flexible hoses that need their connection points referenced.
Inserting the main assembly into the drawing, so that I can see both the main assembly and the sub assembly together, messes up the parts list and balloons.
There must be a way to dislay the sub assembly in the main assembly and still have the part list and ballons reference the sub assembly?
is there a way to tell Inventor to align the view to be perpendicular to the Origin axes when View Face or Sketch on face is selected?
It is most disturbing to have to work with the view cube once in the Sketch just to have it make sense?
This is in Inventor Pro 2012.
I have 4 different sub assemblies , each with a common part , I need to line up all these common parts in my main assembly.
View 5 Replies View RelatedHow can i use a level of detail from sub assembly in the main assembly?
View 2 Replies View RelatedI am trying to get a disc (Coin) to continuously rotate 360 degrees on its vertical axis.
View 5 Replies View RelatedIs there a way of getting a family tree of all the parts and sub-assemblies of a main assembly?
I would like this so I can keep track on what parts need drawings (manufactured parts) and if the drawing has been done.
Can you extend axis or planes in assembleys? I have a laser and I want to extend the axis of it to show the path it takes. I can extend it by clicking and dragging the end in the part, but not the assembly... is there a workaround?
View 2 Replies View RelatedI have a part and I need to scale it in the Z-axis only. It is impossible for me to rework the base geometry directly.
I have made some attempts to figure out how to do this on my own but all have failed:Thicken/OffsetCopy Object + Move Bodies + Combine (wouldn’t let me create a solid with Copy Object)Rectangular Pattern + Combine (works but not the desired result. adds a constant offset to the part, not % based, humongous model size)Derived component (uniform scaling only, prefer to modify the original file for file structure reasons)
I would like to create a curved surface from a flat part. I have designed the 3d part on the XY plane and would like to have it curved as if placed on a sphere.
I have attached a picture of what I want to achieve. The part is curved in both the X-axis and Y-axis. Unfortunately I cannot attach the part file due to proprietary rights.
At first I used the Bend Part feature and created a bend on both sides on one axis.This was done by sketching a line in the center of the part, which is symmetric in the x-axis and using Bend->Sides. Then I sketched another line which is symmetric in the y-axis and this intersects with the first line used for bending. I have found that I cannot create a second bend using this new line.
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedI have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013