I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
is there a method to project the sketch onto the part so that i can then remove 2mm of that shape from the part....?
Inventor 2013 & Inventor 2014 (work)
I am using Inventor 2014. I have a sketch on a part that does not show up when I put the part into an assembly. Any way to make the sketch show up in the assembly? It is a 3d sketch that is projected to a surface.
View 1 Replies View Relatedhow to turn off the visibility of a specific sketch (ex. base_Sketch) of a certain part in assembly using vba?
View 3 Replies View Relatedwhat im trying to do is select a face in an assembly and create a sketch on it in the part level
this is just one step in the program im trying to make the overall program will create a tube frame and the tubes will be driven from a base solid
Sub test1()
Dim asmDoc As AssemblyDocument
Set asmDoc = ThisApplication.ActiveDocument
Dim asmDef As AssemblyComponentDefinition
Set asmDef = asmDoc.ComponentDefinition
[code]......
Unfortunately, it's chock full of proprietary customer data, so I can't share the parts or the assembly. But I can pretty well explain what needs to happen, and I've attached a JPG that shows a bit of what I'm doing.
I need to design a bracket to hold an RPM sensor at a certain gap to a spiral bevel gear. I've got a huge assembly model (non-Inventor) from the customer, as well as the model for the sensor. My plan is to start a master IAM, insert the customer assembly, insert the sensor and constrain him, and draw the various hardware I need around the sensor.
So I start by making a work plane that matches the bevel angle and is in a location so the end of my sensor will be flush to that plane. Create a sketch on that plane, then project 2 relevant axes to create the appropriate "origin" from which my location will be based. Place a point on one line, at a certain radial distance and constrain my point.
So now I've got a point and a plane that are where I want my sensing face and my centerline axis to be. What now? I was thinking that I'd create a work axis "normal to plane through a point", but this workflow isn't available in the assembly environment. I can't constrain a solid to a sketch point, so I really don't know what to do at this point in order to put the part where I need it.
I need converting imperial dimensions into metric in assembly as weell as part level sketches dimensions.
Any solution for converting all imperial dimensions to metric dimensions in whole assembly constraint level and as well as part level sketch dimensions. Any macros or any ilogic rules?
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedIf I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
I can add sketch on a part's workplane (xy, xz, yz) by using sketchs.add.is there anyway i can select a face of part and create a new sketch?
View 6 Replies View RelatedI have a feature that is very similar to a CAM that I need to cut other feature with. The second feature needs to maintain its position way from the CAM feature just as a CAM follower would. The CAM is made up of arcs. If it were made from a spline I would be all set. Is there a way to either convert the arcs to a spline or make a CAM follower type arrangement in a part sketch?
View 1 Replies View RelatedI am trying to make a 3D sketch that is constrained to two different parts in an assembly. I want the sketch to be constrained to each of these parts so that if you move the parts relative to each other the sketch will adapt.
I have tried using work planes and project geometry but when I go to move the part the geometry won't always follow the part. I am using a spline for the 3D sketch so it should be able to adapt when the parts are moved but the problem is constraining it to something that follows the part.
I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedI have an adaptive part which I created within an assembly. I created work planes in this file, based on features in the assembly, and created a sketch on one of these work planes. I used this sketch for an extrusion. then I wanted to reuse the sketch again for another extrusion - normally one needs to select 'Share sketch' from the right-click menu of the sketch, but this is not available. I have already experienced this (random) behaviour, i.e. the 'Share sketch' option missing from the menu. In those case it was ok to make the sketch visible, and then I could use it again. But now it doesn't work. I made it visible, but when I click Extrusion, Inventor wants me to create a sketch, claiming there is no usable sketch.
Inventor 2013
In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies View RelatedI am having trouble adding a sketch which is on a dwg file to my sheet metal part. First I created a flat plate sheet metal part.
I also have a sketch on a dwg file that I am trying to transfer to the surface of the sheet metal plate. I initiated a sketch on
the sheet metal part thinking I couls open the sketch on the dwg part and do a copy and paste. That did not work.
Second I tried to insert the dwg file but when I search for the dwg file under the insert function, there are no dwg files shown.
I'm making a part and am adding features to it and using my existing sketch dimensions as my guide. The problem is that when there are sketch dimensions on the face of the part, they are difficult to read. I'm forever dragging these dims to the side in order to read them, it's just a bit annoying. I was wonering if there was a setting that made them show up as well as they do when the aren't sitting on the face of my parts. I've attached a .jpg of what I'm talking about. notice the dimension on the left side and the bottom.
View 2 Replies View Relatedwhy I am not able to extrude the close sketch through the part.
View 1 Replies View RelatedI have a problem when I`m creating a new part in assembly.
I`m in assembly and I push a create button. Then I give it a name and OK. Then I push a plane where I want to make the part. New sketch comes but no sketch panel. I have to push right button from mouse and click finish sketch. Then when I go edit sketch the sketch panel comes like it suppose it to be.
Is there any method to sort sketch blocks in a part file? All of our sketch blocks are numbered with a profile number. When we create a new multi-body assembly we will often derive 50-100 of them into the master file. It would be great if we could sort them by profile number.
The next best solution would be the ability to create sub-folders to place them in by type (sort of like assembly folders), but I'm pretty sure this isn't possible.
How can I display a sketch or projected geometry that is not a closed loop in a ipt drawing? Historically I have to use a closed loop and emboss in order to display the geometry in a drawing.
Then move that forward to a DXF file for its intended use. I think there should be a way to just have lines placed on the model and display it on a drawing without it having to be a feature.
The company I'm working for is moving toward standardising all plant designs. iLogic appears to be the best way for rapidly producing assemblies that keep to a standard.
My new task is to automate the adding of walkways (including hand rails) to large plants. My idea is that walkways would be added to the plant similar to how frame generator works. The draftsman would draw a sketch on a plane around the structure. He would then run a form (That looks like the frame generator form).He would select the lines, a rule would capture the length of that line, pattern the standard walkway along the line until the line intersection, add a corner walkway, and then pattern the straight walkways again.
1) I do not know the ilogic code in order to 'get' a length from the lines that the user selects.
2) how does one constrain the center line of a part to a sketch line.
The second idea I had to create the walkway is (without a sketch), was to have a form that has a dropdown list of all the standard walkway pieces. The form would work almost like adding a bolted connection to an assembly (e.g. bolt, washer, nut, washer, nut). The draftsman would for instance, choose an straight 800mm part, a 1200mm part, a corner(left), a 1200mm part. Each walkway assembly piece, would then be added to the main assembly in the correct order and constrained. BTW, is there any book with all the inventor iLogic code, function and uses? I have found myself pouring though so many forums and picking up bits and pieces, but no actual instruction.
Is there any way to hide construction lines in Part & Assembly sketches in the same way you can in a Drawing sketch?
I know you can change the line colour to the background colour but this makes the lines invisible in sketch as well.
Not being able to hide the construction is making some layouts pretty pointless since relevant detail is obscured by the construction lines. Grounding the geommetry and deleting the construcion lines isn't an option since the sketches are part of the design development and not fixed.