AutoCAD Inventor :: Hide Part Sketch Construction Lines?
May 16, 2011
Is there any way to hide construction lines in Part & Assembly sketches in the same way you can in a Drawing sketch?
I know you can change the line colour to the background colour but this makes the lines invisible in sketch as well.
Not being able to hide the construction is making some layouts pretty pointless since relevant detail is obscured by the construction lines. Grounding the geommetry and deleting the construcion lines isn't an option since the sketches are part of the design development and not fixed.
View 9 Replies
ADVERTISEMENT
Nov 4, 2012
I would like to export sketches, but leave off the construction lines as they all show up the same in my CAM program. Is there a way to not export the construction lines? Possibly using the "Post Process" options of the Export Options. I am using 2013.
View 1 Replies
View Related
Aug 24, 2012
I'm wanting to have vertical and horizontal construction lines already created whenever I start a sketch so that I can set symmetric constraints to the part I'm drawing up. At the moment, I have to draw both lines every time and constrain them to the center point. It would be much easier if it was already there when I started so I can start on the sketch right away. Is there a way to do this? I've included a photo of what I'd like to do.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professional 64-bit
View 9 Replies
View Related
Dec 12, 2002
I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies
View Related
Oct 29, 2013
In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies
View Related
Sep 14, 2011
Why can i use lines from a 3d sketch to constraint a part to a skeleton base part?
I have attached a example where i try to constraint the tube.ipt using 3D geometry lines of the part Layout_3d_sketch.ipt in the assembly teste.iam, but i'm unable to select any lines from that file.
Why can't i use this 3D sketch lines in a skeleton base part?
View 9 Replies
View Related
Dec 13, 2011
How to create some construction lines on the Inventor drawing? I have been used construction lines on the AutoCAD drawing; it is very convenient tools to use in the daily basic.
View 7 Replies
View Related
Dec 1, 2011
i've got this snowboard rack that i need to layout/markup with some #8 machine screw holes (with countersink for tapered wood screw head) - two on the end of each stretcher to fasten them to the uprights - 8 in total. I also want to layout 8 more holes on the stretchers themselves. I've got some center holes marked in the sketches..but they're not visible when i activate the hole feature so i can properly place the holes?
why i can't extrude the 4 spacers i've got sketched on the back of the stretchers into a solid . . . . i can only cut?
View 6 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Mar 26, 2012
How can I do this? A reference dimension was created by a circular pattern and it covers a circle I'm try to select.
View 2 Replies
View Related
Mar 6, 2013
Is there a way to hide project geometry from model sketch? I am modeling a sheetmetal part where I need to sketch centermaks, part number etc. for laser cutting. I want to use xy planes for symmetry reasons when sketching, but I don't want them to appear in dxf. This is a problem if I create a dxf directly from the model.
Usually I create dxf files from drawing by adding new sheet where I create flat pattern view from the spesific part (excluding machinigs etc, only thermal cut boundaries visible). In the drawing I am allso able to show model sketches and hide unwanted project geometry. Is it possible to include these sketches to dxf?
View 1 Replies
View Related
Feb 7, 2013
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 2 Replies
View Related
Sep 28, 2012
I was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 9 Replies
View Related
Jan 28, 2013
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
View 1 Replies
View Related
Nov 21, 2013
I like to export IPT images (Wireframes with Visible Edges Only) to documents and manuals, but I would like to hide lines where radii meet flat planar features in order to keep the image clean.
View 5 Replies
View Related
Feb 22, 2012
Is it possible to hide the dimension lines like in the attached picture?
Autodesk Inventor 2012
View 4 Replies
View Related
Aug 16, 2011
I want to be able to hide a part of an assembly in one projected view of the 2d drawing but not all, however when I do so the hidden lines stay hidden lines. They do not change. I know you can change the hidden line properties to make them continuous lines but is there a setting that will allow these lines to change automatically?
View 9 Replies
View Related
Mar 8, 2013
I have a cylindrical shaft passing through a bearing. I have a section view showing a cut-away of half of the shaft and bearing. Automated hatching results. I bring the bearing out of the section view (Rclick > Section Participation > None), and the hatching of the shaft remains visible, through the bearing. An image of this is shown below:
I would like to hide that hatching that shows through the bearing, so that it looks like the image below:
How can this be done?
View 8 Replies
View Related
Apr 18, 2012
When I perform a feature on inventor, some yellow lines appear. How can I delete them, or change the view in order to hide them?
View 9 Replies
View Related
Mar 5, 2012
Using Revit Arch to draw/sketch construction docs in 2D, not utilizing the BIM or 3D capabilities? We are a mechanical firm and one of our clients recently told us that they have not renewed their AutoCAD license, are using Revit ONLY and they would like us to sketch our mechanical design in Revit as well, again... not in 3D, but 2D.
View 4 Replies
View Related
Oct 22, 2012
I can add sketch on a part's workplane (xy, xz, yz) by using sketchs.add.is there anyway i can select a face of part and create a new sketch?
View 6 Replies
View Related
Jul 27, 2012
I have a feature that is very similar to a CAM that I need to cut other feature with. The second feature needs to maintain its position way from the CAM feature just as a CAM follower would. The CAM is made up of arcs. If it were made from a spline I would be all set. Is there a way to either convert the arcs to a spline or make a CAM follower type arrangement in a part sketch?
View 1 Replies
View Related
Dec 13, 2011
I am trying to make a 3D sketch that is constrained to two different parts in an assembly. I want the sketch to be constrained to each of these parts so that if you move the parts relative to each other the sketch will adapt.
I have tried using work planes and project geometry but when I go to move the part the geometry won't always follow the part. I am using a spline for the 3D sketch so it should be able to adapt when the parts are moved but the problem is constraining it to something that follows the part.
View 1 Replies
View Related
Oct 15, 2013
I am using Inventor 2014. I have a sketch on a part that does not show up when I put the part into an assembly. Any way to make the sketch show up in the assembly? It is a 3d sketch that is projected to a surface.
View 1 Replies
View Related
Dec 11, 2013
how to turn off the visibility of a specific sketch (ex. base_Sketch) of a certain part in assembly using vba?
View 3 Replies
View Related
Mar 15, 2013
I have an adaptive part which I created within an assembly. I created work planes in this file, based on features in the assembly, and created a sketch on one of these work planes. I used this sketch for an extrusion. then I wanted to reuse the sketch again for another extrusion - normally one needs to select 'Share sketch' from the right-click menu of the sketch, but this is not available. I have already experienced this (random) behaviour, i.e. the 'Share sketch' option missing from the menu. In those case it was ok to make the sketch visible, and then I could use it again. But now it doesn't work. I made it visible, but when I click Extrusion, Inventor wants me to create a sketch, claiming there is no usable sketch.
Inventor 2013
View 9 Replies
View Related
Dec 18, 2013
Cant figure this out - I create a sketch in a drawing, but I cant see the lines as I'm drawing them. The lines are on a "solid" layer set to red as defined in my standard. The background of my drawings is black. When the line command is done, the line appears and it's red. Problem is I cant see it as I'm sketching. Is there any way to modify this? Can I have the line appear red (or white) as I'm sketching?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
View 2 Replies
View Related
Dec 14, 2011
Just getting started, gone through all the tutorials back in 2008...
first time I've actually tried to make something,
Can't use the sketch b/c there's probably a gap in the outline, is there a quick fix?
(Did the entire thing in snap to grid, was hoping there's a function to either connect lines all at once, or ignore Extremely small gaps).
View 5 Replies
View Related
Jul 17, 2013
In sketch mode, there is a function to split lines, but I don't see one to join lines.
(I'm talking about colinear lines with the ends touching - I want to convert two lines into one).
It may seem trivial, but I'd like to use these lines in frame generator to select by a single line and not by endpoints of two different lines. Less clicks and more consistency in my model.
View 5 Replies
View Related
Feb 19, 2013
When I am in sketch mode I can draw a rectangle and when I go back to dimension it it only adjusts that specific line and not the connecting lines. Is there a setting or command to fix this?
View 1 Replies
View Related
Dec 7, 2013
is there a method to project the sketch onto the part so that i can then remove 2mm of that shape from the part....?
Inventor 2013 & Inventor 2014 (work)
View 1 Replies
View Related
