AutoCAD Inventor :: How To Have Construction Lines Already Drawn When Starting New Sketch
Aug 24, 2012
I'm wanting to have vertical and horizontal construction lines already created whenever I start a sketch so that I can set symmetric constraints to the part I'm drawing up. At the moment, I have to draw both lines every time and constrain them to the center point. It would be much easier if it was already there when I started so I can start on the sketch right away. Is there a way to do this? I've included a photo of what I'd like to do.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professional 64-bit
View 9 Replies
ADVERTISEMENT
Nov 4, 2012
I would like to export sketches, but leave off the construction lines as they all show up the same in my CAM program. Is there a way to not export the construction lines? Possibly using the "Post Process" options of the Export Options. I am using 2013.
View 1 Replies
View Related
May 16, 2011
Is there any way to hide construction lines in Part & Assembly sketches in the same way you can in a Drawing sketch?
I know you can change the line colour to the background colour but this makes the lines invisible in sketch as well.
Not being able to hide the construction is making some layouts pretty pointless since relevant detail is obscured by the construction lines. Grounding the geommetry and deleting the construcion lines isn't an option since the sketches are part of the design development and not fixed.
View 9 Replies
View Related
Dec 13, 2011
How to create some construction lines on the Inventor drawing? I have been used construction lines on the AutoCAD drawing; it is very convenient tools to use in the daily basic.
View 7 Replies
View Related
Oct 1, 2012
When ever I start a new sketch in the xz plane (viewing from top down) my sketch rotates 180 degrees. Not a huge deal to rotate it back, but not everything I create is symetrical and when I go to draw the part, I want a certain ISO view to be default. I know you can insert/obtain any view into the drawing but is there an option to stop this rotation or maybe I am not setting up something correctly.
Using Inventor Pro 2012
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 9 Replies
View Related
Oct 6, 2012
I want to draw a line between the two sketches visible on the image below. The line should be in the plane visible. The starting point of the line should be from wherever the top sketch intersects the plane of the current sketch. The finnish point of the line should be wherever a line of the bottom sketch intersects the current sketch plane.
There is no tooltip appearing that would allow me to quickly "attach" the starting line to the correct position. Is there such an aid, and how do i turn it on?
View 1 Replies
View Related
Dec 1, 2011
i've got this snowboard rack that i need to layout/markup with some #8 machine screw holes (with countersink for tapered wood screw head) - two on the end of each stretcher to fasten them to the uprights - 8 in total. I also want to layout 8 more holes on the stretchers themselves. I've got some center holes marked in the sketches..but they're not visible when i activate the hole feature so i can properly place the holes?
why i can't extrude the 4 spacers i've got sketched on the back of the stretchers into a solid . . . . i can only cut?
View 6 Replies
View Related
Jan 28, 2013
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
View 1 Replies
View Related
Mar 5, 2012
Using Revit Arch to draw/sketch construction docs in 2D, not utilizing the BIM or 3D capabilities? We are a mechanical firm and one of our clients recently told us that they have not renewed their AutoCAD license, are using Revit ONLY and they would like us to sketch our mechanical design in Revit as well, again... not in 3D, but 2D.
View 4 Replies
View Related
Sep 23, 2013
I need to find out how to import/ convert a real hand drawn sketch into a .dwg or .dxf format so it can be used on a CNC machine to cut the pattern out of a 6mm sheet of aluminium
View 2 Replies
View Related
Dec 18, 2013
Cant figure this out - I create a sketch in a drawing, but I cant see the lines as I'm drawing them. The lines are on a "solid" layer set to red as defined in my standard. The background of my drawings is black. When the line command is done, the line appears and it's red. Problem is I cant see it as I'm sketching. Is there any way to modify this? Can I have the line appear red (or white) as I'm sketching?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
View 2 Replies
View Related
Dec 14, 2011
Just getting started, gone through all the tutorials back in 2008...
first time I've actually tried to make something,
Can't use the sketch b/c there's probably a gap in the outline, is there a quick fix?
(Did the entire thing in snap to grid, was hoping there's a function to either connect lines all at once, or ignore Extremely small gaps).
View 5 Replies
View Related
Jul 17, 2013
In sketch mode, there is a function to split lines, but I don't see one to join lines.
(I'm talking about colinear lines with the ends touching - I want to convert two lines into one).
It may seem trivial, but I'd like to use these lines in frame generator to select by a single line and not by endpoints of two different lines. Less clicks and more consistency in my model.
View 5 Replies
View Related
Feb 19, 2013
When I am in sketch mode I can draw a rectangle and when I go back to dimension it it only adjusts that specific line and not the connecting lines. Is there a setting or command to fix this?
View 1 Replies
View Related
Feb 24, 2013
How I can get rid of the construction lines that show on a solid model so all l am left with is just solid colour.
View 6 Replies
View Related
Dec 12, 2002
I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies
View Related
Mar 21, 2013
How can I have sketch lines drawn to perfect lengths. I mean it should be in multiples of 1/16 of an inch.
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Jul 23, 2013
I opened a part today and noticed that it had collapsed into itself.
This should be a rectangle 85x15.75:
On closer inspection it appears that the vertical lines somehow became zero length lines. Why does this happen?
Edit: I should mention that I was able to repair the skecth by making the 85" dimension driven, then dragging the line over...
View 3 Replies
View Related
Dec 12, 2013
I am having problems with lines disappearing in a sketch randomly. I am in a small assembly, going in and out of sketches used for machining, and then the sketch lines and dimensions will all be gone when I enter a sketch. If I hover over the sketch in the browser I can see the lines highlighted, but when I remove my mouse the will disappear. I cannot interact with the lines or dimensions at all. If I draw a new line, it immediately disappears. I have tried changing some things in the view tab and settings but haven't had any luck.
View 7 Replies
View Related
Mar 29, 2013
I have an oddly shaped flat plate extruded from a sketch, the sketch of which has lots on constructions lines, none of which actually represent solid edges of the plate. However, I want to locate the plate to other components via the geometry defined in the sketch.
I find that when I am trying to constrain the plate to other parts none of the sketch geometry is available to me. Points, lines, construction lines, circles; I can select none of it when constraining. I am confused. How can I constrain such a part?
Just to clarify - the flat plate is the base of a structure. Its profile is decoratively shaped, so nothing about the cut edge of the plate is suitable for constraining to. I need to constrain off geometry defined in the sketch.
I have "Shared" the sketch.
Inventor 2013
View 4 Replies
View Related
Oct 27, 2012
I have created a chassis wireframe using 2D and 3D sketches. In frame generator, I am able to insert frame members on the 2D lines, but not the 3D lines. I can put frame members on 3D lines ONLY if I use the "insert members between points" placement, but then I can't merge several members together to create 1 tube (can I?).
How do I put frame members on 3D sketch lines using the "insert members on edges" placement?
OR
How do I merge tube members when they are inserted using the "insert members between points" placement?
Inventor Professional 2013
Windows 7 64-bit
View 5 Replies
View Related
Oct 12, 2012
I have a question regarding copying geometry in drawing mode.
When I was working in V5 and making drawings I sometimes had to "fake" geometry, the world is not perfect I know, copy geometry in the 2d, like center lines and such. I am trying to do the same in Inventor and use the project geometry button and geometry is created but it does not show up when exiting sketch.
View 5 Replies
View Related
Nov 24, 2011
For some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
View 8 Replies
View Related
Jul 10, 2013
I am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies
View Related
Oct 29, 2013
In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies
View Related
Feb 1, 2012
I have a newly discovered issue with left clicking and moving lines and points in 2D-sketch.
After working in Inventor for a while I cant move lines and points(green and unconstrained geometry). If I exit 2D sketch mode and enter again I can move a line once and then its back to not being able to manipulate the geometry at all, the curser just want to create a marking box.
I have a new optical mouse with cord, its a Logitech G400. I have switched mouse but with the same result.I have installed the latest driver for the mouse.
View 3 Replies
View Related
Jun 28, 2013
Being all new and complete virgin-like, to ilogic, I would like to know wether it is possible to analyze a sketch (wenn it is being closed)?
What I want to analyze is:
Does the sketch contain a fully constrained closed loop?
Does this closed loop consist only of straight lines?
What is the total number of lines in the loop?
Next fase is:
Create an excel-sheet with the following information:
For each line in this closed loop i wish to add the length of the line, and the angle to the next line (consequently on the internal side of the loop, resulting in angles from 0 to 180 degrees).
View 2 Replies
View Related
Sep 14, 2011
Why can i use lines from a 3d sketch to constraint a part to a skeleton base part?
I have attached a example where i try to constraint the tube.ipt using 3D geometry lines of the part Layout_3d_sketch.ipt in the assembly teste.iam, but i'm unable to select any lines from that file.
Why can't i use this 3D sketch lines in a skeleton base part?
View 9 Replies
View Related
Oct 26, 2012
I have been searching for a macro to export the start and end point of a line coordinates to excel, but I can only find information on how to export 3D Points.
Is it possible to program a macro that allows me to export the start and end point of various lines in a sketch?
The objective of this is to connect an excel file which is updated when I create a line with it correspondent points, then i could not only import these x,y,z coordinates from excel to inventor but I whould be able to update my spreedsheet whenever I change my sketch.
View 1 Replies
View Related
Jul 26, 2012
I want to create a animation like this with a very Engineering Drawing theme to it: URL....I have also attached two images (stills) from the animation.
The question is, how do I create the "construction" lines (i.e. the blue marker lines) that go beyond the models? Is this something I should consider doing in post?
My current approach is to use planes with textures of the "construction" lines and linked to 3D models. The lines would also look like marker pen/pencil lines.
An alternative could be to use lots of lines and make then render-able but then they would look too perfect and not pencil graphite or marker lines.
View 1 Replies
View Related
Apr 22, 2013
I just upgraded from AutoCad LT 2008 to 2013. I cannot offset a line that is drawn the x-axis. I also cannot copy an item with the ORTHO command on and run it along the x-axis. I'm only allowed to move it along the y-axis. I've now waisted at least three hours messing with every possible command that I can think of trying to fix it. What do I have set wrong?
View 9 Replies
View Related
