I have a question regarding copying geometry in drawing mode.
When I was working in V5 and making drawings I sometimes had to "fake" geometry, the world is not perfect I know, copy geometry in the 2d, like center lines and such. I am trying to do the same in Inventor and use the project geometry button and geometry is created but it does not show up when exiting sketch.
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
Cant figure this out - I create a sketch in a drawing, but I cant see the lines as I'm drawing them. The lines are on a "solid" layer set to red as defined in my standard. The background of my drawings is black. When the line command is done, the line appears and it's red. Problem is I cant see it as I'm sketching. Is there any way to modify this? Can I have the line appear red (or white) as I'm sketching?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
I was using a 3 MB PDF underlay yesterday and zooming/panning/saving operations were very sluggish.
BTW, when I attach a PDF underlay, AUTOCAD allows me to snap to the lines in the PDF and even measure them. Since it recognizes those lines, is there an easy way to copy the lines from the PDF into the drawing?
I have a one rectangular block(Control cabinet) it consists of around 100 sub rectangular blocks here problem is in my part user wants few blocks in different dimensions and different positions some time. So I created one sketch in my sketch plane then user wants more features on rectangular block then I want automatically copy and paste on same plane same sketch and same time automatically asking for dimensions(positional, length and width).
View 3 Replies View RelatedI did a sketch in an idw that is not attached to any view. I wan't to copy it somehow to another idw. But when I right click, copy and/or paste are not available for me to complete to process.
I tried creating a symbol using my already made sketch since those are easier to copy/paste between files. But I don't know how to proceed without recreating my sketch.
I have a sketch on the global ZY plane. I need a copy of the sketch on some other plane.
But when I copy the sketch and paste it to the other plane, the sketch seems to rotate.
It is pasted not the way I would like. And I see no method to rotate it into the correct position.
It's probably easy, but I do not see it.
Here I attached my model view it's just for reference here iam using rectangular pattern and simple ilogic code .Using rectangular pattern we will get all same sizes of boxes but i want to change different different sizes and positions. my idea is without using pattern just draw one rectangular through parameter. Select no. of compartments automatically copy and paste that rectangular in same sketch plane and ask sizes and positions dimensions.
It's possible through ilogic?
In my panel bar options are:
Hight of panel- Hight of panel
width1- Width of panel
Depth1-Depth of panel
com1- no.of Compartments
hIN- No.of Hinges
Just getting started, gone through all the tutorials back in 2008...
first time I've actually tried to make something,
Can't use the sketch b/c there's probably a gap in the outline, is there a quick fix?
(Did the entire thing in snap to grid, was hoping there's a function to either connect lines all at once, or ignore Extremely small gaps).
In sketch mode, there is a function to split lines, but I don't see one to join lines.
(I'm talking about colinear lines with the ends touching - I want to convert two lines into one).
It may seem trivial, but I'd like to use these lines in frame generator to select by a single line and not by endpoints of two different lines. Less clicks and more consistency in my model.
When I am in sketch mode I can draw a rectangle and when I go back to dimension it it only adjusts that specific line and not the connecting lines. Is there a setting or command to fix this?
View 1 Replies View RelatedI know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedHow can I have sketch lines drawn to perfect lengths. I mean it should be in multiples of 1/16 of an inch.
Inventor Professional 2013
Vault Collaboration 2013
I opened a part today and noticed that it had collapsed into itself.
This should be a rectangle 85x15.75:
On closer inspection it appears that the vertical lines somehow became zero length lines. Why does this happen?
Edit: I should mention that I was able to repair the skecth by making the 85" dimension driven, then dragging the line over...
I am having problems with lines disappearing in a sketch randomly. I am in a small assembly, going in and out of sketches used for machining, and then the sketch lines and dimensions will all be gone when I enter a sketch. If I hover over the sketch in the browser I can see the lines highlighted, but when I remove my mouse the will disappear. I cannot interact with the lines or dimensions at all. If I draw a new line, it immediately disappears. I have tried changing some things in the view tab and settings but haven't had any luck.
View 7 Replies View RelatedI have an oddly shaped flat plate extruded from a sketch, the sketch of which has lots on constructions lines, none of which actually represent solid edges of the plate. However, I want to locate the plate to other components via the geometry defined in the sketch.
I find that when I am trying to constrain the plate to other parts none of the sketch geometry is available to me. Points, lines, construction lines, circles; I can select none of it when constraining. I am confused. How can I constrain such a part?
Just to clarify - the flat plate is the base of a structure. Its profile is decoratively shaped, so nothing about the cut edge of the plate is suitable for constraining to. I need to constrain off geometry defined in the sketch.
I have "Shared" the sketch.
Inventor 2013
I have created a chassis wireframe using 2D and 3D sketches. In frame generator, I am able to insert frame members on the 2D lines, but not the 3D lines. I can put frame members on 3D lines ONLY if I use the "insert members between points" placement, but then I can't merge several members together to create 1 tube (can I?).
How do I put frame members on 3D sketch lines using the "insert members on edges" placement?
OR
How do I merge tube members when they are inserted using the "insert members between points" placement?
Inventor Professional 2013
Windows 7 64-bit
I would like to export sketches, but leave off the construction lines as they all show up the same in my CAM program. Is there a way to not export the construction lines? Possibly using the "Post Process" options of the Export Options. I am using 2013.
View 1 Replies View RelatedIs there any way to hide construction lines in Part & Assembly sketches in the same way you can in a Drawing sketch?
I know you can change the line colour to the background colour but this makes the lines invisible in sketch as well.
Not being able to hide the construction is making some layouts pretty pointless since relevant detail is obscured by the construction lines. Grounding the geommetry and deleting the construcion lines isn't an option since the sketches are part of the design development and not fixed.
I am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies View RelatedI'm wanting to have vertical and horizontal construction lines already created whenever I start a sketch so that I can set symmetric constraints to the part I'm drawing up. At the moment, I have to draw both lines every time and constrain them to the center point. It would be much easier if it was already there when I started so I can start on the sketch right away. Is there a way to do this? I've included a photo of what I'd like to do.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professional 64-bit
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies View RelatedI have a newly discovered issue with left clicking and moving lines and points in 2D-sketch.
After working in Inventor for a while I cant move lines and points(green and unconstrained geometry). If I exit 2D sketch mode and enter again I can move a line once and then its back to not being able to manipulate the geometry at all, the curser just want to create a marking box.
I have a new optical mouse with cord, its a Logitech G400. I have switched mouse but with the same result.I have installed the latest driver for the mouse.
Being all new and complete virgin-like, to ilogic, I would like to know wether it is possible to analyze a sketch (wenn it is being closed)?
What I want to analyze is:
Does the sketch contain a fully constrained closed loop?
Does this closed loop consist only of straight lines?
What is the total number of lines in the loop?
Next fase is:
Create an excel-sheet with the following information:
For each line in this closed loop i wish to add the length of the line, and the angle to the next line (consequently on the internal side of the loop, resulting in angles from 0 to 180 degrees).
Why can i use lines from a 3d sketch to constraint a part to a skeleton base part?
I have attached a example where i try to constraint the tube.ipt using 3D geometry lines of the part Layout_3d_sketch.ipt in the assembly teste.iam, but i'm unable to select any lines from that file.
Why can't i use this 3D sketch lines in a skeleton base part?
I have been searching for a macro to export the start and end point of a line coordinates to excel, but I can only find information on how to export 3D Points.
Is it possible to program a macro that allows me to export the start and end point of various lines in a sketch?
The objective of this is to connect an excel file which is updated when I create a line with it correspondent points, then i could not only import these x,y,z coordinates from excel to inventor but I whould be able to update my spreedsheet whenever I change my sketch.
I'm a student and a beginner in VBA. I'm writing a macro to automatically draw text and lines in a drawing and it goes pretty well. But now I have encountered a problem. When I add text like this:
Dim FreqBox As TextBox
Set FreqBox = oSketch.TextBoxes.AddFitted(oTG.CreatePoint2d(1.9, 1.95), GegevensForm.FrequentieVak.Value)
This is like I want it, but not the right font or size, so I add this:
FreqBox.Style.Font = "Arial"
FreqBox.Style.FontSize = 0.2
This goes well too, but then I want to add another TextBox, in another style, like this:
Dim VermogenBox As TextBox
Set VermogenBox = oSketch.TextBoxes.AddFitted(oTG.CreatePoint2d(3.7, 3.2), GegevensForm.VermogenVak.Value)
VermogenBox.Style.Font = "Arial"
VermogenBox.Style.FontSize = 0.5
VermogenBox.HorizontalJustification = kAlignTextRight
VermogenBox.Style.Bold = True
And suddenly when I run this, the other text is changing to these settings... (exept for the alignment).Is it possible to do this without the FormattedText option
Every time a select a plane to sketch onto, it rotates 180 degrees...... i have looked in the settings but cannot really find anything.. i have attached images for reference .
View 3 Replies View RelatedI have created a loft from 4 different sketches. Now I want to make a drawing with the front, side view and the dimensions of the 4 profile sketches from the loft. But I can’t find a way to put the sketches from the part on my paper. It works with copy-paste ;^) but this is not the way I want it (it’ll not change when I change the profiles in the part).
View 6 Replies View Related
