AutoCAD Inventor :: Starting Sketch In XZ Plane Screen Rotates 180
Oct 1, 2012
When ever I start a new sketch in the xz plane (viewing from top down) my sketch rotates 180 degrees. Not a huge deal to rotate it back, but not everything I create is symetrical and when I go to draw the part, I want a certain ISO view to be default. I know you can insert/obtain any view into the drawing but is there an option to stop this rotation or maybe I am not setting up something correctly.
Using Inventor Pro 2012
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 9 Replies
ADVERTISEMENT
Sep 10, 2013
I have a sketch on the global ZY plane. I need a copy of the sketch on some other plane.
But when I copy the sketch and paste it to the other plane, the sketch seems to rotate.
It is pasted not the way I would like. And I see no method to rotate it into the correct position.
It's probably easy, but I do not see it.
View 2 Replies
View Related
Aug 24, 2012
I'm wanting to have vertical and horizontal construction lines already created whenever I start a sketch so that I can set symmetric constraints to the part I'm drawing up. At the moment, I have to draw both lines every time and constrain them to the center point. It would be much easier if it was already there when I started so I can start on the sketch right away. Is there a way to do this? I've included a photo of what I'd like to do.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professional 64-bit
View 9 Replies
View Related
Sep 17, 2003
When I pick the XZ plane to create a new sketch, then Look At it, the red origin indicator is pointing left, meaning I'm on the back side. How did I get over on the front side. Something with flip axis or something like that?
View 9 Replies
View Related
Oct 6, 2012
I want to draw a line between the two sketches visible on the image below. The line should be in the plane visible. The starting point of the line should be from wherever the top sketch intersects the plane of the current sketch. The finnish point of the line should be wherever a line of the bottom sketch intersects the current sketch plane.
There is no tooltip appearing that would allow me to quickly "attach" the starting line to the correct position. Is there such an aid, and how do i turn it on?
View 1 Replies
View Related
Apr 30, 2013
I have a one rectangular block(Control cabinet) it consists of around 100 sub rectangular blocks here problem is in my part user wants few blocks in different dimensions and different positions some time. So I created one sketch in my sketch plane then user wants more features on rectangular block then I want automatically copy and paste on same plane same sketch and same time automatically asking for dimensions(positional, length and width).
View 3 Replies
View Related
Aug 26, 2013
I am jammed in this matter...I have my 3d sketch and i would like to control the angle betewwen the two planes with
the dimension of the 3d sketch. I am at the level that i can change angle between planes.
View 1 Replies
View Related
Apr 13, 2008
I use AddByNormalToCurve method to create a work plane in a sketch 3D. Is it possible to make new workplane object to be consumed by the parent Sketch3D (Workplane.Consumed = True) as it is possible in UI in Edit mode ?
My sample code in IV 2008:
Public Sub WorkPlane_Test()
'reference to the transient geometry
Dim oTG As TransientGeometry
Set oTG = ThisApplication.TransientGeometry
'reference to the component definition
[code]........
View 5 Replies
View Related
Dec 20, 2013
When I tried to make a sketch plane on one of the surfaces of the revolved feature, it only had the option to edit the original sketch or the feature even though the sketch that I'm trying to create is on a different plane. There is one surface that allows me to add a sketch plane.
View 5 Replies
View Related
Dec 29, 2011
How does one constrain a sketched line in the sketcher to a datum plane?
View 5 Replies
View Related
Sep 27, 2013
I cannot make a plane parallel to a surface and through a sketch point.
I can't also select the sketch point or line in order to make an axis. the sketch point, line from the sketch or anything from a sketch isn't selectable.
View 4 Replies
View Related
Jan 9, 2013
I added another extrusion profile to my structural shapes library, using the same method as the others a few years ago. It works, but the new extrusion now shows up with its profile sketch, start and end planes, and driven dimension visible. The old stuff doesn't (like I would expect). I have all planes in the published part turned off, not marked for export, etc., just like in the old ones. How do I turn this off? Inventor 2012 SP2.
When I open the extrusion separately, the work features to not display. But, the it's also shown as the "default" color not as material. Why does it default to "default" not "as material" like everything else?
View 1 Replies
View Related
May 1, 2013
Here I attached my model view it's just for reference here iam using rectangular pattern and simple ilogic code .Using rectangular pattern we will get all same sizes of boxes but i want to change different different sizes and positions. my idea is without using pattern just draw one rectangular through parameter. Select no. of compartments automatically copy and paste that rectangular in same sketch plane and ask sizes and positions dimensions.
It's possible through ilogic?
In my panel bar options are:
Hight of panel- Hight of panel
width1- Width of panel
Depth1-Depth of panel
com1- no.of Compartments
hIN- No.of Hinges
View 1 Replies
View Related
May 17, 2013
I would like to be able to offset a 3D Sketch in a direction normal to a plane. In the attached image, I have drawn in an orange color the direction I would like the 3DSketch to offset.The white line is where the new sketch would be.
The yellow surface is the 3dsketch extend to a plane
There might be some tools in Inventor that will do what I am trying, but I have not found it yet. I have tried extend surface, but that will not take it the direction I want.
View 6 Replies
View Related
Aug 13, 2012
Working on setting up 2013 for our department. By default we use the application option - Part Tab - of creating a sketch on the x-z plane upon new part creation. Now this actually works, problem is you can't draw on it, or you can't see what you are drawing. If you exit out of the sketch and start a new one then it works. I have found that if you switch the setting to the y-z plane is does the same thing. Switching it to no new sketch or the x-y plane and it works fine. Tying to determine if it's actually a bug in inventor or if it's just something with what I am doing or our template files.
View 5 Replies
View Related
Feb 10, 2012
I`m using Inventor 2012.When i select a new sketch from the New file drop down selection box ( new sketch picture) the XY plane is a different view to when i select a new sketch from the Part selection box (new sketch 1).
How can i make a default work plane when opening a new sketch?I would like to have the work plane identical to the new sketch picture when ever i open a new sketch file
View 3 Replies
View Related
Oct 3, 2012
I have just upgraded to 2013, and there is one "feature" I find kind of distracting. When working in a part, I create a new sketch. When I extrude that sketch, Inventor automatically switches me to an Iso view. I don't want that. I would prefer to stay in the view that I established.
Is there a way to turn that off?
View 4 Replies
View Related
Aug 25, 2010
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
View 9 Replies
View Related
May 21, 2013
I have drawn a 2D sketch (of a wind turbine) and I found it easier to just rotate the drawings of the blades out of the plane of the drawing to get something that looks like an isometric view. So now some parts of my drawing are in plane, and other parts are turned out of plane by like 35 degrees, so looking at it from the top it looks like an isometric view of the turbine.
However, now I have a task to have the same drawing but with gradient filling in the turbine itself as well as the air and water in the background. The easiest way to do this would be to somehow get a 2D projection drawing of what I see when I look at the plane from the top. (see attached picture)
So what I need is to get what is called "Top View" in the picture with all lines being in-plane from the out-of-plane drawing shown on the right.
View 6 Replies
View Related
Jul 13, 2013
How to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies
View Related
Apr 24, 2009
I already have all my settings the way that I want the users to see them when starting AutoCAD 2010 for the first time. But when you first start up AutoCAD 2010 it brings up the Initial Setup screen. I was wondering if there was a way to get that not to display but just open AutoCAD right away.
View 3 Replies
View Related
Mar 5, 2008
When our photographer browses his folders with pictures and double clicks upon one of them (jpg-files always), his Photoshop (he uses CS3 and Windows NT) always opens up the file only shoving it as 16,3% size (or such, I can't remember the exact number)
As a result the picture hardly fills 1/4 or 1/8 of the available space in the Photoshop screen, and he always has to click the picture larger before being able to work in it.
He has recently got a new - and more powerful - computer, and he did not have the same problem when using the old computer, here his files always opened to the maximum possible size.
View 4 Replies
View Related
Dec 13, 2012
I just started up my Illustrator cs6 today, and a screen came up that said Tryout. This the first time its ever happened. After checking out google, I found that similar questions were asked but on torrent sites. I purchased the creative suite fully in September. So, I'm not as to why I would receive this screen.
View 3 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
May 30, 2013
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
View 8 Replies
View Related
Aug 22, 2012
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies
View Related
