AutoCAD Inventor :: New Part Default Sketch On Y-z Plane Can't Draw
Aug 13, 2012
Working on setting up 2013 for our department. By default we use the application option - Part Tab - of creating a sketch on the x-z plane upon new part creation. Now this actually works, problem is you can't draw on it, or you can't see what you are drawing. If you exit out of the sketch and start a new one then it works. I have found that if you switch the setting to the y-z plane is does the same thing. Switching it to no new sketch or the x-y plane and it works fine. Tying to determine if it's actually a bug in inventor or if it's just something with what I am doing or our template files.
I`m using Inventor 2012.When i select a new sketch from the New file drop down selection box ( new sketch picture) the XY plane is a different view to when i select a new sketch from the Part selection box (new sketch 1).
How can i make a default work plane when opening a new sketch?I would like to have the work plane identical to the new sketch picture when ever i open a new sketch file
When I pick the XZ plane to create a new sketch, then Look At it, the red origin indicator is pointing left, meaning I'm on the back side. How did I get over on the front side. Something with flip axis or something like that?
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I have a one rectangular block(Control cabinet) it consists of around 100 sub rectangular blocks here problem is in my part user wants few blocks in different dimensions and different positions some time. So I created one sketch in my sketch plane then user wants more features on rectangular block then I want automatically copy and paste on same plane same sketch and same time automatically asking for dimensions(positional, length and width).
I use AddByNormalToCurve method to create a work plane in a sketch 3D. Is it possible to make new workplane object to be consumed by the parent Sketch3D (Workplane.Consumed = True) as it is possible in UI in Edit mode ?
My sample code in IV 2008:
Public Sub WorkPlane_Test() 'reference to the transient geometry Dim oTG As TransientGeometry Set oTG = ThisApplication.TransientGeometry 'reference to the component definition [code]........
When I tried to make a sketch plane on one of the surfaces of the revolved feature, it only had the option to edit the original sketch or the feature even though the sketch that I'm trying to create is on a different plane. There is one surface that allows me to add a sketch plane.
I cannot make a plane parallel to a surface and through a sketch point.
I can't also select the sketch point or line in order to make an axis. the sketch point, line from the sketch or anything from a sketch isn't selectable.
I added another extrusion profile to my structural shapes library, using the same method as the others a few years ago. It works, but the new extrusion now shows up with its profile sketch, start and end planes, and driven dimension visible. The old stuff doesn't (like I would expect). I have all planes in the published part turned off, not marked for export, etc., just like in the old ones. How do I turn this off? Inventor 2012 SP2.
When I open the extrusion separately, the work features to not display. But, the it's also shown as the "default" color not as material. Why does it default to "default" not "as material" like everything else?
When ever I start a new sketch in the xz plane (viewing from top down) my sketch rotates 180 degrees. Not a huge deal to rotate it back, but not everything I create is symetrical and when I go to draw the part, I want a certain ISO view to be default. I know you can insert/obtain any view into the drawing but is there an option to stop this rotation or maybe I am not setting up something correctly.
Here I attached my model view it's just for reference here iam using rectangular pattern and simple ilogic code .Using rectangular pattern we will get all same sizes of boxes but i want to change different different sizes and positions. my idea is without using pattern just draw one rectangular through parameter. Select no. of compartments automatically copy and paste that rectangular in same sketch plane and ask sizes and positions dimensions.
I would like to be able to offset a 3D Sketch in a direction normal to a plane. In the attached image, I have drawn in an orange color the direction I would like the 3DSketch to offset.The white line is where the new sketch would be.
The yellow surface is the 3dsketch extend to a plane
There might be some tools in Inventor that will do what I am trying, but I have not found it yet. I have tried extend surface, but that will not take it the direction I want.
Is there any way to dimension my features, whether it's a sketch or using the hole feature, to either the middle of my part or to a middle plane I have?
I am wanting a group of tapped holes to be the same from the middle of my part, regardless of what the overall size of the part is. How can I dimension like this?
there is a command or simple procedure to actively view a section plane in an assembly or part. I know there are the static methods of using slice graphics and section view however I'm looking to create a live section where I am able to constantly move the plane through the model thus altering the live section as it appears on screen, similar to the way a model can be viewed in Tekla with the cut section command.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
I have a feature that is very similar to a CAM that I need to cut other feature with. The second feature needs to maintain its position way from the CAM feature just as a CAM follower would. The CAM is made up of arcs. If it were made from a spline I would be all set. Is there a way to either convert the arcs to a spline or make a CAM follower type arrangement in a part sketch?
I am trying to make a 3D sketch that is constrained to two different parts in an assembly. I want the sketch to be constrained to each of these parts so that if you move the parts relative to each other the sketch will adapt.
I have tried using work planes and project geometry but when I go to move the part the geometry won't always follow the part. I am using a spline for the 3D sketch so it should be able to adapt when the parts are moved but the problem is constraining it to something that follows the part.
Is there a way to set Inventor so that the sketch origin defaults to the part origin? I find it very frustrating that it always defaults to some random corner of the part's body. It can screw up a part if you decide later on to modify the part such that you eliminate the point to which a coordinate system was defined. Also, when copying and pasting a sketch to new work planes it can be a pain to figure out which point is the origin of the orignal sketch if the pasted sketch is misaligned.
I know you can edit the coordinate system after a sketch is created, but I'd prefer not to have to rememember to do that with every sketch.
This was brought up about 6 years ago and there was no formal resolution
[URL]
In the second-to-last post John-IV8SP1mentions an option under 'Application Options' for an older version of AI, but I cannot find it in the 2012 applicaton options.
Is it possible to change the default sketch orientation, so that when making a new sketch on the XZ or the YZ planes the Z axis would act as the X, not the Y?
I am using Inventor 2014. I have a sketch on a part that does not show up when I put the part into an assembly. Any way to make the sketch show up in the assembly? It is a 3d sketch that is projected to a surface.
I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
I have an adaptive part which I created within an assembly. I created work planes in this file, based on features in the assembly, and created a sketch on one of these work planes. I used this sketch for an extrusion. then I wanted to reuse the sketch again for another extrusion - normally one needs to select 'Share sketch' from the right-click menu of the sketch, but this is not available. I have already experienced this (random) behaviour, i.e. the 'Share sketch' option missing from the menu. In those case it was ok to make the sketch visible, and then I could use it again. But now it doesn't work. I made it visible, but when I click Extrusion, Inventor wants me to create a sketch, claiming there is no usable sketch.
