AutoCAD Inventor :: Multiple Extrusions From One Draw Plane?
Feb 17, 2012more than one closed shape on the same plane.
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Use Single Sketch For Multiple Extrusions
Nov 8, 2013How to use a single sketch for multiple extrusions, i would create all the holes and everything in one sketch and i could reuse that sketch again and again.i totally forgot how to do this.
View 2 Replies View RelatedAutoCAD Inventor :: Frame Generator Multiple Extrusions
Sep 23, 2013I have an aluminum frame system that is comprised of 9 seperate extrusions, what is the best way to handle this? I would like to get a BOM that shows each each seperate extrusion with cut length.
Must I author each of the 9 shapes separately , then separately apply them onto the frame and then adjust each of the end conditions accordingly?
For initial experimentation I created an .ipt in which I have a sketch of all 9 shapes, I extruded them all separately (multibody) then authored the combination of all shapes as one frame gen shape..
This allows me to easily apply the member and create the appropriate end conditions, but does not give me an accurate BOM.
AutoCAD Inventor :: New Part Default Sketch On Y-z Plane Can't Draw
Aug 13, 2012Working on setting up 2013 for our department. By default we use the application option - Part Tab - of creating a sketch on the x-z plane upon new part creation. Now this actually works, problem is you can't draw on it, or you can't see what you are drawing. If you exit out of the sketch and start a new one then it works. I have found that if you switch the setting to the y-z plane is does the same thing. Switching it to no new sketch or the x-y plane and it works fine. Tying to determine if it's actually a bug in inventor or if it's just something with what I am doing or our template files.
View 5 Replies View RelatedAutoCAD Inventor :: Creating Multiple Plane Ifeature
Nov 17, 2011I'm new to Inventor, less than a month of experience learning by myself. I want to create an ifeature that uses sketches from 2 different planes. I found out how to place a simple ifeature but i'm having difficulty with the multiple plane references. I can select the 2 planes when inserting and tried using the "activate sketch for placement", but I can only reference the first feature, the second one isn't available at that point, therefore does not appear after completion.
View 1 Replies View RelatedAutoCad :: How To Draw Section Plane At Angle
Jun 15, 2011I have a cube and I want to create a section plane that goes trough the middle of 3 edges that have a common point. After this I should be able to erase the smaller solid and keep the bigger one. If needed I will attach an image to be better understood.
View 4 Replies View RelatedAutoCAD Inventor :: Work Plane Rotated At Angle To Another Plane And Passing Through Axis Of Cylinder
Jul 13, 2013How to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedAutoCAD Inventor :: Dimensioning Between Different Extrusions On One Part?
Sep 11, 2012How do I dimension, and assign editable parameters between different extrusions on one part, to change the height, width, etc?
View 9 Replies View RelatedAutoCAD Inventor :: Creating Content Center Extrusions
Sep 20, 2013I am attempting to add some of our custom extrusions to the content center but want them to act the same way Inventor's "default" files act. By that I mean, if I make a new assembly and pick a piece of Angle, for example, to place from the content center, as long as I choose "as standard" and give it a length, the part shows up without me having to save anything new. I can then copy or drag in a second instance of that same angle, right click it and "change length", and the length of just that ONE changes. In the tree on the right the result is:
-DIN 59 370 S S 10x 2 - 600:1
-DIN 59 370 S S 10x 2 - 2000:1
With 600 and 2000 being lengths. That's standard Inventor behavior with their standard parts. When I try to publish my own extrusion, I guess I don't have the right key columns or something. I place MY extrusion and input a length, etc. Then when I copy it and try to "change length", nothing happens and it is named part number:2 in the tree.
AutoCAD Inventor :: How To Move Extrusions / Square Holes
Feb 20, 2013I am using Autodesk Inventor Professional 2013 and I am currently trying to move some square holes that I made (using extrusions). How can I move these around inside the main extrusion (called Extrusion 1 in the attached design) without changing any of the dimensions etc?
Is there a simple way of selecting them all and moving them, or do I have to do it one at a time?
AutoCAD Inventor :: Negative Extrusions Lead To Mesh Failure?
Jul 10, 2012I've modelled part of a ship's deck, it consists of rather simple geometrich shapes(Plates, knee brackets and profiles).
However, when i model the assembly and do some negative extrusions in order to get the model how i want it, it leads to a face failure during mesh generation.
AutoCAD Inventor :: Detecting No Effect - Sheet Metal Cuts And Extrusions
Mar 14, 2013How can I detect sheet metal cut and extrusion cut features that have the white circular model browser node icon wih the "i" insided it (toolip says "No effect?") via the Inventor API? You get this situation if the sketch does not cut any geometry. I want to delete these features.
I'm using Inventor 2012 and VB.Net.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
AutoCAD Inventor :: Suppressing Extrusions With Ilogic Based On Construction Line?
Aug 7, 2012I am trying to suppress features or Extrusions if the extrusions are outside of the Raduis of a contruction circle Called the OTL. I have added a model to look at. So lets say I have holes enougth for a 40" dia but I want only hole today for a 20" dia how do i suppress the holes on that radius. Sketch 10 is where the OTL contruction line is and its a radius so its always moving as I go from center out.
View 9 Replies View Related3ds Max :: Draw Vertical Line Up Z Axis In Perspective View - Locked To X / Y Plane
Nov 28, 2013Struggling with an Educational version of 3ds Max 2013, and all of a sudden I can't seem to draw a vertical line (or shape) up the z axis in the perspective view -- I seem to be locked to the x/y plane and am loosing my mind...
View 2 Replies View RelatedAutoCad 2D :: Mirrored Blocks And Extrusions
Mar 30, 2012For our bespoke AutoCAD plugin we can not use mirrored blocks or those with extrusions.
I know I can find mirrored blocks by quick selecting scales of less than 0, is there a similar way to select blocks with a negative extrusion?
Even better would be a process (LisP?) to select all the blocks that are mirrored or have negative extrusions.
AutoCad 2D :: Draw Multiple Closed Polylines From One List Of Coordinates In Excel
Sep 22, 2011I'm trying to create about 150 cross-sections, each consisting of 9 closed polylines of which I have created the coordinates. My issue is making the list of coordinates create separate polylines instead of one enormous polyline. Any way to setup the columns, perhaps with blank rows, some way of applying ASCII code, etc. to automatically break up these polylines? (even if they aren't closed that's fine, I just need to make the polylines separate.)
View 1 Replies View RelatedAutoCad :: How To Extract Total Area Of Layer Which Has Extrusions Of Polylines
Oct 25, 2011I created walls for a structure by drawing a simple polylines and extruding it by the Z axis, so that i get a vertical plane. I created a number of such planes in the layer. I want to extract total area of this layer which has these polyline extrusions (planes). I know the command of add area, but it is a tedious process and does not work for curved planes. How do I extract the area for the entire layer in one go ?
View 9 Replies View RelatedAutoCAD Inventor :: New Sketch On XZ Plane
Sep 17, 2003When I pick the XZ plane to create a new sketch, then Look At it, the red origin indicator is pointing left, meaning I'm on the back side. How did I get over on the front side. Something with flip axis or something like that?
View 9 Replies View RelatedAutoCAD Inventor :: Sketching On Ground Plane?
Feb 24, 2012why can't i sketch on the ground plane? If i turn on the ground plae I assume it is a plane like any other but I can't sketch on it nor can i attach nother plane to it?
View 9 Replies View RelatedAutoCAD Inventor :: Turn All Plane Views Off At Once?
Jun 17, 2013I have a part given to me from a customer that has ALL custom planes turned on. This file is large and has many assemblies, part, sub assy's.... too much to go thru one at a time. Can I turn all 'plane views' off at once? Why? Because I find it messy... no other reason.
View 3 Replies View RelatedAutoCAD Inventor :: Creating Offset Plane
Jan 1, 2012I drew the first sketch. i want to insert an offset plane. i use the plane tool, mark 2 sketch entities and a plane is formed. i move it, but it moves only on the plane of the sketch, the dialog box for the distance doesn't appear.
View 3 Replies View RelatedAutoCAD Inventor :: Work Plane Visibility
Mar 30, 2012when in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies View RelatedAutoCAD Inventor :: No Parameter Name For Offset Plane
Jun 22, 2012All previous releases of Inventor before 2013 would display the name of the parameter that controls the offset value of a plane. While editing an offset plane you could see the name either in the title of the pop up or by holding your cursor over the parameter value. In release 2013 I have been unable to find the parameter name anywhere when editing the plane. I have a lot of equations in my models. Being able to track down bugs is difficult enough without not knowing what parameter I'm looking at.
Is there a setting I need to turn on/off to get the parameter name to display again?
AutoCAD Inventor :: Snap To Geometry On Different Plane
Nov 12, 2013I have a sketch on plane XY and I have another plane at an angle, which I would like to work on. How can I create a sketch on the angled plane, using the geometry from the XY sketch and which I can snap to?
View 5 Replies View RelatedAutoCAD Inventor :: Cut Two Circular Profiles On XZ Plane
Jan 23, 2013This sheet metal part has two bends, and was created with a lofted flange feature on the XY plane:
It was then cut by two circular profiles on the XZ plane:
When the flat pattern is created, it seems to work just fine as long as the diameter of the circular cut is below a certain value. Once the diameter is increased beyond this value, the flat pattern returns a cryptic error and does not compute:
I know that the bend geometry does NOT pass through the bend axis, so I am left guessing at what the real problem is. I have attached the part. The part currently has the parameter called "Tank_ID" set to 500 in. To see the error, change the value of this parameter to 600 in. For me, the flat pattern breaks between the values of 512 and 513 in.
Why does the flat pattern work at 512, but not at 513, since there is no significant difference in geometry?
AutoCAD Inventor :: Derived Part On Different Plane
Sep 27, 2011Possible to have more than 1 derived part in a part.
And is it possible to select on which plane and location the derived part is to be?
I have a part with a derived part but now I want to add another part to it. is this possible?
AutoCAD Inventor :: Positioning Of Points On Angled Plane
Oct 18, 2011I need to accurately position a point on an angled plane, but the question is how?
I've generated the required planes, the axis to revolve the angled plane around, and of course, the angled plane itself. (See attacment)
I now need to position the point coincident to the generated axis/plane and the angled plane. I have nothing to refer to so I can't project any geometry from any face. (The vee-shaped recess is generated after the slot is extruded and its position is the resut of the breakout against the OD).
How can I do this???
AutoCAD Inventor :: Place IFeature With Point And Plane
Mar 13, 2012In the programming I found an example to place an ifeature on a face.I've modified it to place it on a face without selectset but with features. faces. item(1)
how to place it on that face with a vertex from that face or a workpoint that lies on that face.I've tried to adapt other code on this forum but can't find it.
AutoCAD Inventor :: Repositioning Part On Ground Plane
Oct 4, 2012I have created a part in Inventor that is not on the ground plane, is there an easy way to quickly re-position this on the ground plane ?
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Extrude To Different Direction Then Existing Plane?
Jan 27, 2012I have what I am sure is -not very complicated- part that has a goofy intersecting angle. I have created a plane for this angle to try and do the cutout but it extrudes at the 30 deg, where as I would like to extrude that 30 deg feature at 90 deg. Is this possible?
The RED text says "Currently extruding this way" (30 deg per the plane)
The BLUE text says "Want to extrude this way" (90 deg, in line with the from face basically)
Inventor 2014 PDS
AutoCAD Inventor :: 2010 - Edit Dimension For Plane
May 24, 2012I am using Inventor 2010 Professional Student. I have drawn and extruded on a plane. I need to move this plane to a new measurement (from -45 to -47). When the Edit Dimension box appears, I type the new measurement in, but the plane wont move. I have a lot of construction sitting on this plane, but it is in the wrong spot.
View 2 Replies View Related