How to use a single sketch for multiple extrusions, i would create all the holes and everything in one sketch and i could reuse that sketch again and again.i totally forgot how to do this.
View 2 Replies
I have an aluminum frame system that is comprised of 9 seperate extrusions, what is the best way to handle this? I would like to get a BOM that shows each each seperate extrusion with cut length.
Must I author each of the 9 shapes separately , then separately apply them onto the frame and then adjust each of the end conditions accordingly?
For initial experimentation I created an .ipt in which I have a sketch of all 9 shapes, I extruded them all separately (multibody) then authored the combination of all shapes as one frame gen shape..
This allows me to easily apply the member and create the appropriate end conditions, but does not give me an accurate BOM.
more than one closed shape on the same plane.
View 9 Replies View RelatedI design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies View RelatedA quick way to add a single column to multiple items in the Content Center? The column would be the same across the board, and I really don't want to edit several hundred family tables one at a time if I don't have to.
View 2 Replies View RelatedWhat I'm doing is preparing a model for FEA, and I want to split some faces for where the nuts meet a surface. So far I've only been able to do this by repeatedly making a sketch and then splitting around each hole. Is it possible to do several splits from one drawing or to pattern the split? (I've attempted both, but failed hard).
Splitting a surface 5 times is slow, but essentially fine. Doing it this way when I have more bolt holes though is a chore.
How to save IDW's with multiple sheets in to 1 single CAD file
I have IDW's whith lots of sheets and when saved to cad, I got multiple files and I always end up doing copy paste to create a single file
I have a door with 3 of the same handle. I have a program in which the user selects 1 of the handles to turn it into a keyed handle. Now, this all works but the problem is that all of the 3 regular handle instances will be replaced with the keyed handle.
Dim oOccHandle As ComponentOccurrence = oINV.CommandManager.Pick(SelectionFilterEnum.kAssemblyOccurrenceFilter, "Select a door handle to replace.")
oOccHandle.ReferencedDocumentDescriptor.ReferencedFileDescriptor.ReplaceReference(PathToKeyedHandleModel)
I am trying to creating an extrusion with a sketch containing multiple circles. However, the AddForSolid() Method is not working properly, returning non-NOERROR is C++. Below is the code that I used to create a sketch(which is succeeded) and then try to create a extrusion (in my case cutting).
ApplicationPtr pInvApp;pInvApp.GetActiveObject("Inventor.Application");DocumentPtr pItem;pItem = pInvApp->GetActiveDocument();PartDocumentPtr pDoc;if(pItem->GetDocumentType() == kPartDocumentObject)pDoc = pItem;SelectSetPtr selectedItem;selectedItem = pDoc->GetSelectSet();FacePtr face;//printf("
[code]....
Is it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
I am creating a part that consists of a series of intermediate Lofts. The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another. I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part. Most, but not all, of my sketch planes are normal (perpendicular) to that axis.
I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane. I am having a minor difficulty.
When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis, Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point. Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.
Is this correct behavior? To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?
Can Dynamic Simulation drive multiple variables with a single parameter? In the following example, the variables len_A and len_B are driven by size. The parameter "size" varies from .8 to 1.2 (currently I have size parameters in a Multi-Value List).
Is there a way Dynamic Simulation can drive the "size" parameter to animate the assembly? I plan to use Dynamic Simulation's Output Grapher to Plot a Trace of the triangle's apex as A and B vary in length. The example assembly is attached.
I use flat piano hinges on doors for many of the machines we build. I would like to be able to calculate the total length of multiple doors on a single machine. We buy these hinges so it needs to go on a buy out parts list.
So here is my problem:
To make it a useable hinge I build an assembly from two hinge halves.
This allows me to check for interference within the machine when the door gets opened.
I set the BOM structure of the assembly to purchased so it shows up on my buy out list.
Both halves of the hinge are set to normal.
There are hinges of different lengths on the same machine.
I can link a parameter of one of the halves to the assembly to show length of the hinge but I cannot set the BOM base qty on the assembly to that parameter so Inventor can add up the lengths.
When I group the items in a buyout parts list the result is "0." The individual assemblies show the correct length because I use the "length" parameter that is linked for the QTY in the parts list. But I cant "add" the lengths and have a total whe I group them.
I need to have mixed units in this list. Some things are bought as Each and these hinges are bought in length.
I have one large assembly for hose routing it consists of around 1000 hoses all hoses are coming in main assembly but delivery date is very short. My plan is work on same assembly 5 people how it works?
One idea is like working in sub assemblies but in my case only one assembly consist of all hoses.
How to work multiple users in single assembly file at same time. like in solid works enable collabarative mode.
How do I dimension, and assign editable parameters between different extrusions on one part, to change the height, width, etc?
View 9 Replies View RelatedI am attempting to add some of our custom extrusions to the content center but want them to act the same way Inventor's "default" files act. By that I mean, if I make a new assembly and pick a piece of Angle, for example, to place from the content center, as long as I choose "as standard" and give it a length, the part shows up without me having to save anything new. I can then copy or drag in a second instance of that same angle, right click it and "change length", and the length of just that ONE changes. In the tree on the right the result is:
-DIN 59 370 S S 10x 2 - 600:1
-DIN 59 370 S S 10x 2 - 2000:1
With 600 and 2000 being lengths. That's standard Inventor behavior with their standard parts. When I try to publish my own extrusion, I guess I don't have the right key columns or something. I place MY extrusion and input a length, etc. Then when I copy it and try to "change length", nothing happens and it is named part number:2 in the tree.
I am using Autodesk Inventor Professional 2013 and I am currently trying to move some square holes that I made (using extrusions). How can I move these around inside the main extrusion (called Extrusion 1 in the attached design) without changing any of the dimensions etc?
Is there a simple way of selecting them all and moving them, or do I have to do it one at a time?
I've modelled part of a ship's deck, it consists of rather simple geometrich shapes(Plates, knee brackets and profiles).
However, when i model the assembly and do some negative extrusions in order to get the model how i want it, it leads to a face failure during mesh generation.
How can I detect sheet metal cut and extrusion cut features that have the white circular model browser node icon wih the "i" insided it (toolip says "No effect?") via the Inventor API? You get this situation if the sketch does not cut any geometry. I want to delete these features.
I'm using Inventor 2012 and VB.Net.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I am trying to suppress features or Extrusions if the extrusions are outside of the Raduis of a contruction circle Called the OTL. I have added a model to look at. So lets say I have holes enougth for a 40" dia but I want only hole today for a 20" dia how do i suppress the holes on that radius. Sketch 10 is where the OTL contruction line is and its a radius so its always moving as I go from center out.
View 9 Replies View RelatedImagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies View RelatedI've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedWhen I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedI have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies View Related
